PDA

View Full Version : AK polish underfolder question


ilovemyar
03-16-2012, 12:19 AM
Ive been searching but couldnt find an answer. If I was to build a polish underfolder, since it is mine and unregistered, by CA law does the underfolder stock need to be pinned or welded open? Do I still need a bullet button? Thanks for the assistance

1forall
03-16-2012, 1:48 AM
Ive been searching but couldnt find an answer. If I was to build a polish underfolder, since it is mine and unregistered, by CA law 1.does the underfolder stock need to be pinned or welded open? 2. Do I still need a bullet button? Thanks for the assistance

1. Not necessarily
2. Yes, if you are not going featureless

You may want to refer to and/or study the flow chart. Good luck!

eville
03-16-2012, 7:44 AM
You can fold it as long as the overall length is at least 30 inches. This
Eans adding an extended flash hider and maybe a can opener sling attachment.

CIV Tactical
03-16-2012, 7:52 AM
You can fold it as long as the overall length is at least 30 inches. This
Eans adding an extended flash hider and maybe a can opener sling attachment.
^^^^ roger that. As long as your ak is at least 30" in its shortest configuration its legal. I have a polish underfolder kit coming as well and I plan on coming up with a conversion to keep the stock extended while in CA. Kinda like a bullet button for the underfolding stock. when your building make sure that the gun cannot be fired until that stock is fixed.