PDA

View Full Version : WTS: 1919A4 parts


CaliBoundAR15
03-08-2012, 8:31 PM
I have the following spare parts for sale. All prices are + shipping to wherever you are. Parts are in San Diego and I can meet for a FTF in the Poway, Ramona, Santee areas. Starting from the upper left:

1st Column:
-Brass barrel bushing for M3AC .50 cal (Was new in cosmo, but partially removed for pic) $30 SPF
-Tanker style booster (Used, but good shape) $35 SPF
-Complete rivet set for 1919A4 build (Came from Allied Armament) $35 SPF

2nd Column:
-Bottom plate (Somebody really squeezed the rivets on this and cracked two of the holes. Could be fixable if you're handy.) $75 SPF
-Stripped USGI 30-06 top cover (This is not an Izzy workover and the only markings are the serial number on the underside) $100
-Blued lock frame stripped (Only marking is a flaming bomb proof on the underside) $50

3rd Column:
-Spade grip hangars (For building your own spades) $35 SPF
-Original "In the white" 30-06 bolt (Again, not an Izzy workover. This is an original USGI bolt. The early 1917's usually had their internals left "In the white" instead of parked/blued. SG manufacture and in great shape.) $150

http://i1210.photobucket.com/albums/cc409/CaliBoundAR15/P1030898.jpg

CaliBoundAR15
03-10-2012, 6:55 AM
BTT

nick
03-10-2012, 7:16 AM
I'll take the M1919 rivets.

CaliBoundAR15
03-16-2012, 11:19 AM
BTT

CaliBoundAR15
03-22-2012, 4:35 PM
BTT. USGI bolt, lockframe, and top cover still available. Make an offer...

CaliBoundAR15
03-24-2012, 12:18 PM
BTT. Make an offer on the remaining parts....

CaliBoundAR15
04-01-2012, 7:42 AM
BTT