PDA

View Full Version : FCG pins slide out..


NYY
09-26-2011, 6:29 PM
Usually when I shoot, my FCG pins slide out a little. Is that what those black connectors are for? Was unsure. Thanks

evidens83
09-26-2011, 6:32 PM
You seem to always have problems dont you?? LOL JP

dieselpower
09-26-2011, 6:32 PM
if the FCG pins are falling out one of two things has happened. the holes are oblonged, or the Hammer and Hammer spring need changed. The hammer has a J-hook spring inside that holds its pin in place and the hammer spring holds the trigger pin in place.

I am drunk so i hope this helps....

EBR Works
09-26-2011, 6:34 PM
Usually when I shoot, my FCG pins slide out a little. Is that what those black connectors are for? Was unsure. Thanks

http://www.knsprecisioninc.com/mm5/merchant.mvc?Screen=PROD&Store_Code=KNS1&Product_Code=NRTHPMOD2&Category_Code=GunParts

NYY
09-26-2011, 6:36 PM
haha yea i always seem to.

http://www.knsprecisioninc.com/mm5/merchant.mvc?Screen=PROD&Store_Code=KNS1&Product_Code=NRTHPMOD2&Category_Code=GunParts

yeaaaa those things. Alright cool.

tomd1584
09-26-2011, 7:14 PM
could be your hammer spring is installed incorrectly.

fmunk
09-26-2011, 7:22 PM
Dieselpower is spot-on, even while drunk.

SJgunguy24
09-26-2011, 8:01 PM
Yes those little clips hold the axis pins in place.

metalliman545
09-27-2011, 2:37 PM
Hammer spring legs need to be on top of the trigger pin. If the legs go underneath the trigger the trigger pin will slide out.