PDA

View Full Version : Enfields, Mosin M44, Nagant Revolver, San Jose Area


TS77
07-15-2011, 10:49 AM
I'm in the San Jose are and prefer to do a FTF in the Bay Area South and East bay areas and the Peninsula

Two SMLEs made under the British Raj in India:

1919 Ishapore made SHTLE, stock has 3 cracks that I've repaired with glue. Also, a piece of the stock had cracked off next to the action (doesn't affect function) and I've repaired that with JB weld. Rifle functions perfectly, and the cracks have not propagated further SOLD

https://lh3.googleusercontent.com/-WPhI1s8LRBk/TiCGuAjy4PI/AAAAAAAAAcg/RWSto34Fyjo/s512/weekend%252520028.jpg
https://lh3.googleusercontent.com/-Suwf-LDvmYQ/TiCGsfuNCRI/AAAAAAAAAcc/otGg5EgER40/s512/weekend%252520024.jpg
https://lh3.googleusercontent.com/-ynLOKsmDyHY/TiCG6JSyh0I/AAAAAAAAAck/IT700g-WLRw/s512/weekend%252520023.jpg
crack on left side:
https://lh3.googleusercontent.com/-io36cs8cN48/TiCG88vPHcI/AAAAAAAAAco/qXBDhxc-p-k/s512/weekend%252520025.jpg
cracks on right side, repaired wood
https://lh5.googleusercontent.com/-gi4yK_o0CRQ/TiCHBx4FHHI/AAAAAAAAAcw/bHd6qRhW7EE/s512/weekend%252520027.jpg

TS77
07-15-2011, 11:03 AM
1943 Ishapore-made SMLE
No cracks in this stock, in very good condition. The safety tended to flop back while firing, putting the rifle on safe, so I removed the safety while firing it, and can't find the screw that holds it to the rifle, still looking for it though. Besides the safety, works great. SOLD
https://lh6.googleusercontent.com/-apdJvA8yXX0/Th2ThUAL7HI/AAAAAAAAAbM/XZw9hSR-dNM/s512/weekend%252520011.jpg
https://lh6.googleusercontent.com/-XkbaBx2awIU/Th2Tn26VdtI/AAAAAAAAAbQ/3-FCILL-aeg/s512/weekend%252520009.jpg
https://lh6.googleusercontent.com/-Jo7XfVfUN9g/Th2TwsVehfI/AAAAAAAAAbU/R_nrEo42DC0/s512/weekend%252520013.jpg
https://lh5.googleusercontent.com/-X98Twue7xjc/Th2Tz8dQvsI/AAAAAAAAAbY/cvFgya0wMrA/s512/weekend%252520014.jpg
https://lh4.googleusercontent.com/-LJrf1R6GDLE/Th2T-fQBkfI/AAAAAAAAAbg/38PpsBAWhjY/s512/weekend%252520015.jpg

bedan86
07-15-2011, 11:06 AM
i'll take the enfield with crack stock for $ 135, pm sent

TS77
07-15-2011, 11:11 AM
Post WW2 produced M44 in very good condition, this has been my main Mosin shooter for years, but I need to clear out some space. Functions wonderfully, never had any sticky bolt problems, and is quite accurate. I can easily hit 2 liter bottles at 200 yards. Has some minor cosmetic defects, all done by me: chip in the stock and I dented the sight hood slightly. Comes with leather sling (different than any other mosin sling I seen) and the typical ammo pouch an oiler bottle. SOLD

https://lh5.googleusercontent.com/-TxcNyX7UNiA/Th2UD1sIKYI/AAAAAAAAAbk/_WhzxTu92C0/s512/weekend%252520016.jpg
https://lh5.googleusercontent.com/-dmaYyIWyxKo/Th2ULeVCxvI/AAAAAAAAAbo/hk5a8n4EIAg/s512/weekend%252520017.jpg
https://lh4.googleusercontent.com/-LtjfYleRoYk/Th2UMaL9b6I/AAAAAAAAAbs/6_POgIinKCU/s512/weekend%252520018.jpg
chipped stock:
https://lh5.googleusercontent.com/-OrLS-hno67w/Th2UWrm1PjI/AAAAAAAAAb0/q8zuHwnz-ak/s512/weekend%252520020.jpg
bent site hood, you probably wouldn't notice if I didn't mention it :)
https://lh3.googleusercontent.com/-4spTM4XXRHw/Th2UZApFcUI/AAAAAAAAAb4/QWLh5m1FsM4/s512/weekend%252520021.jpg

gotta run, more to post later

TS77
07-15-2011, 6:40 PM
Rossi .38 Revolver -- NEEDS FIXING
5-shot copy of the S&W j-frame. DOUBLE ACTION DOES NOT CONSISTENTLY FIRE, I suspect a timing issue. Single-action fire works fine. I've tried changing the hammer spring, which didn't solve the problem. I bought it used from a dealer when I was young(er) and dumb(er), and got taken for a ride. It's an old Interarms import, so there's no more importer support on this Asking $135

Nagant Revolver with Ammo!
WW2-made revolver, good condition, functions perfectly. I'm selling with 150+ .32 H&R Magnums, and 150+ .32 S&W longs. Both rounds function well when the rear of the cartridge case is taped (I used scotch tape)SOLD for revolver and the 300+ rounds of ammo, prefer to sell as a package at this time

https://lh5.googleusercontent.com/-Xq1AJ7YZZfw/TiUfL3zwdjI/AAAAAAAAAd0/rAkouFJaKj0/s288/weekend%2B007.jpg
https://lh4.googleusercontent.com/-aZMrrJa_zAM/TiUfOLou8gI/AAAAAAAAAd4/W2FYgc_uFpI/s288/weekend%2B006.jpg
https://lh5.googleusercontent.com/-4_3Iky4vCME/TiUfLIsTnFI/AAAAAAAAAdw/XBnKi5mct9M/s288/weekend%2B004.jpg
https://lh4.googleusercontent.com/-TUh5wyk-nHU/TiUfDllQnEI/AAAAAAAAAds/Sicljxi59po/s288/weekend%2B005.jpg

TS77
07-16-2011, 11:27 AM
Bump

cackinthebox
07-16-2011, 11:43 PM
I'll take the other Enfield, PM with details

dmax11
07-17-2011, 9:13 AM
PM sent on the M44

Abra Philippines
07-17-2011, 9:47 AM
If sale on M44 doesn't go through with dmax11, I'd like to be 2nd in line for the M44. Thank you

TS77
07-18-2011, 10:21 PM
Bigger pictures added, as requested