PDA

View Full Version : GAP10 ...


JasonB
06-28-2011, 1:11 AM
Usually don't post look at my rifle pics but I wanted to give a lot of love out to a couple Major TBRC sponsers ...

Fit and finish is excellent ... without the riser i almost had enough room for the 5-25 with Badger USMC Rings. I ordered a Badger Ord Riser with 22moa built that is lower profile and will help with get to 1k once I put the NF on it ... btw thanks Vu for the continued loan of your 5-25x.

Thursday will be range day out to 1k ....

Silver State Armory 7.62x51 175gn OTM to zero do a little break in...

Then I have some hand load im going to be hitting up...

Heads up on anyone planning to reload... my OAL to the lands was approx 2.215 ... my bolt gun loads from Jerry Newman I seat at 2.220 going to be seating the loads I have made now back to 2.200 on top of 44gn and 45gn Varget with 175 smks and see how she does.

Thanks Mike at www.cstactical.com the scope and sling ( not shown ) ...

Some Surefire Love ... Thanks for TBRC Sponsership ... Picked up a EW-04 and EW-05 ... extremely nice blades. I keep hoping I get to run a vehicle accident with entrapment just so I can punch a window with my EW-04 ! Don't Judge Me ! :)
http://i221.photobucket.com/albums/dd254/JBoak/GAP10SF.jpg

Some NCPPRC Love ...
http://i221.photobucket.com/albums/dd254/JBoak/GAP10NC.jpg

Some GAP10 Love ...
http://i221.photobucket.com/albums/dd254/JBoak/GAP10.jpg

And yes I have to run that stupid wrap around grip in order to be CA Complaint with detatable magazines.

xxINKxx
06-28-2011, 1:47 AM
As far as the last sentence about the "stupid grip".. The set up looks more like a gun that you'd be shooting at a sitting spot anyways. (sniper/precision) so doesn't really seem like it would be that much of a burden to have. I'm not much a fan of that grip, but on your gun it looks great

Dhena81
06-28-2011, 1:32 PM
This is the most accurate semi .308 no one talks about that is one nice firearm you have there sir congrats

ePxKz7Z9UhM

Iggy
06-28-2011, 1:36 PM
Great buy!!

With all the talk about AR's around here I don't know why anyone doesn't bring up GAP. Not only are they good shooters, but they are the best price around for a precision AR10(308).

How long did it take to get yours made?

HK Dave
06-28-2011, 2:03 PM
Nice looking rig! GAP10 is my favorite 308 AR. :)

JasonB
06-28-2011, 3:38 PM
think it was about 3mo probably little less

Gofasterdammit
06-28-2011, 6:42 PM
Congrats on the new stick Jason. Have you heard of any issues using a P-Mag? A GAP-10 is on my short list.

Sniper3142
06-28-2011, 7:08 PM
OUTSTANDING rig!

GA Precision makes some excellent rifles and their GAP10 is one of my favorite semi-autos.

Great choice for an optic also. Premier Reticle scopes are a great match for a GAP10.

NorCalAthlete
06-28-2011, 7:34 PM
Congrats on the new stick Jason. Have you heard of any issues using a P-Mag? A GAP-10 is on my short list.

My POF shipped WITH a P-mag...so no, I don't think there will be any issues with them =P

killshot44
06-28-2011, 7:59 PM
my OAL to the lands was approx 2.215 ... my bolt gun loads from Jerry Newman I seat at 2.220 going to be seating the loads I have made now back to 2.200 on top of 44gn and 45gn Varget with 175 smks

Jason, did you have that thing short-throated or are these typos? .308 case-length is 2.015"

JasonB
06-28-2011, 10:27 PM
I trim cases to 2.005 per reloading manual... but no not short throated ...

my Bolt gun was jumping about .030 with the 2.220 rounds... roughly...

I measured some factory SSA ammo and they were around 2.19x to the OGive ...

killshot44
06-28-2011, 11:39 PM
Okay, so that measurement is off the ogive using a caliper attachment?
Cause I know you've got more than .200 of bullet sticking out of that 2.005 case!