PDA

View Full Version : Mag block 20 rnd limiter


zoid52
05-28-2011, 11:47 AM
USGI straight mags -Trick to putting 10 rnd limiter?

shadowofnight
05-28-2011, 11:55 AM
http://www.magazineblocks.com/product_detail.php?pid=4

No trick, easy as can be.

zoid52
05-28-2011, 12:02 PM
The GI 20s are different from the GI 30s as they have an additional tab on the mag body in the rear. I cant figure how to make it work.

Fate
05-28-2011, 1:28 PM
Insert tip of a round into the tiny hole on the bottom of the floorplate. This will depress the tab that's sticking up thru the floorplate. Then slide floorplate to rear (towards the tab you describe).

zoid52
05-28-2011, 1:30 PM
Insert tip of a round into the tiny hole on the bottom of the floorplate. This will depress the tab that's sticking up thru the floorplate. Then slide floorplate to rear (towards the tab you describe).

I dont have a problem taking the base plate off; the problem is assembling the mag w/ the block.

chead
05-28-2011, 1:43 PM
Epoxy the block to the floor plate, insert into mag, epoxy floor plate to the mag body. Done.