View Full Version : .22 rifle sight adj
12-09-2006, 6:24 PM
I have a 10/22 rifle which shoots about 8" to the right. Is there a prefered way to adjust the front sight without banging on it? It looks like it should be able to slide left or right.
12-09-2006, 6:34 PM
at what distance is it shooting 8" off? if it is shooting 8" at 100yds or less I'd think it is either a bent barrel or one of the sight mounts was machined out of spec.. or how the barrel mounts in the receiver is out of spec.
12-09-2006, 7:05 PM
I agree with NRAhighpowershooter, 8" is quite a bit for a 10/22. Were you using a benchrest or shooting freehand? You might have better luck running a search on http://www.rimfirecentral.com/forums/ These guys live to tinker with 10/22's :)
12-09-2006, 8:59 PM
I used the bench rest but not with any sandbags. The rifle has had quite a few rounds put through it in the last 8 years. The grouping is not the tightest but is in the general area on the paper target probably 2". I was only shooting out to 50 yards.
vBulletin® v3.8.9, Copyright ©2000-2016, vBulletin Solutions, Inc.