PDA

View Full Version : AK-74 muzzle brake options / flash hider


RobGR
02-21-2011, 11:01 AM
Options that will fit the SGL31-61 muzzle threads besides the muzzle brake? To confirm, the alternate part I would be looking for has a 24 x 1.5 thread, right?

I found this but is there anything else out there - 24mm Flash Hider (http://www.onesourcetactical.com/bulgarianstyle24mmbirdcageflashhider.aspx) - It also concerns me b/c it says "style" as opposed to strictly defining it with the 5.45x39 caliber.

Thanks for any suggestions or recommendations.



-

RobGR
02-22-2011, 8:51 AM
OST responded to my email and this is what they said : "That part is actual made for a 7.62X39MM AK but it will also work on a 5.45X39MM AK."

if it's not made for a 74, I don't think I would put it on my firearm. It's sort of butt ugly anyway.

69Mach1
02-22-2011, 8:54 AM
It will work. The 7.62 FS has a larger hole than a 5.45, so it would be safe to use on an AK 74.

munkeeboi
02-22-2011, 10:00 AM
OST responded to my email and this is what they said : "That part is actual made for a 7.62X39MM AK but it will also work on a 5.45X39MM AK."

if it's not made for a 74, I don't think I would put it on my firearm. It's sort of butt ugly anyway.

Butt ugly, but it is the correct flash hider (replica) !for a bulgarian rifle with 24mm threads

bigthaiboy
02-22-2011, 11:24 AM
Options that will fit the SGL31-61 muzzle threads besides the muzzle brake? To confirm, the alternate part I would be looking for has a 24 x 1.5 thread, right?

I found this but is there anything else out there - 24mm Flash Hider (http://www.onesourcetactical.com/bulgarianstyle24mmbirdcageflashhider.aspx) - It also concerns me b/c it says "style" as opposed to strictly defining it with the 5.45x39 caliber.

Thanks for any suggestions or recommendations.



-

My advice is, if you are going to buy that FH, buy it directly from the manufacturer: CNCWarrior (http://cncwarrior.com/comersus/store/comersus_viewItem.asp?idProduct=148) for only $28.99. A lot of One Source Tactical's AK inventory appears to be marked up CNC Warrior products.

RobGR
02-22-2011, 9:36 PM
Thanks for the link. Can't argue with some savings.... I may just buy it then. Really wish there were some other options but the original 74 brake is def sufficient.


EDIT: Ah, found the krink brake on CNC, but too much for my blood and fuglier than the bulgy birdcage.


-

s30
02-22-2011, 10:50 PM
I know this isnt a brake, but if you are not running a featureless you could always get one of these

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2167970

RobGR
02-24-2011, 11:31 AM
Not looking for a brake specifically, just options for that muzzle. Unfortunately, per the website, that one doesn't fit my SGL31. Thanks for posting it though.