PDA

View Full Version : WTS/WTT Locking plastic and Fiberglass Cases with Foam Tracy


one*eyed*jack
01-23-2011, 4:42 PM
I have a few cases I don't use that I'm looking to get rid of. Location is Tracy. Prices are listed. Offers will be considered.

I will also trade for:
ammunition (.223, 9mm, 45acp, 380acp, 22lr, 30-30 winchester, 357 Magnum or 38 special),
30mm or 50mm ammo cans,
9 round magazines for a Ruger Standard .22 auto.,
AR15 complete BCG

This case is in good used condition. $60.00
This looks like a Haliburton or other quality manufacturer case. It is made of hard plastic and has solid layers of foam in it (foam is not original to the case). The lid is filled with a layer of hard foam and has a divider that is covered with soft foam.The bottom layer has a layer of the same hard foam that is about 3 inches thick and is covered by another layer of the softer foam. The foam can be cut with a serrated knife to fit whatever your putting in them. It has locks and working keys. It is 19 x 15 x 7 outside dimensions.

http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0974_small.jpg
http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0976_small.jpg

This case is in good used condition. $25
This is a generic attache type case. It is made of plastic and is fairly light weight. It has solid layers of foam in it (foam is not original to the case). The foam can be cut with a serrated knife to fit whatever your putting in them. It has locks and working keys. It is 19 x 15 x 5 1/2 outside dimensions. There are two layers of foam on the bottom side, may be two on the top also.
http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0970_small.jpg
http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0971_small.jpg

This case is also in good used condition. $50
This is a good quality case maybe Platt. It is made of hard plastic (ABS I think) and has solid layers of foam in it (foam is not original to the case). The foam can be cut with a serrated knife to fit whatever your putting in them. It has locks and working keys. It is 18 x 13 1/2 x 8 1/2 outside dimensions. It has a divider inside. There are two layers of foam on each side.
http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0969_small.jpg
http://i18.photobucket.com/albums/b145/jjleprikon/calguns/DSCF0968_small.jpg

one*eyed*jack
01-24-2011, 5:05 PM
This case is in fair shape. $45.00 An unmarked (no model number or manufacturer) case carbon or fiberglass type material. I believe this may be an older model Platt case, but I don't find a model number or manufacturers label on it. Its in fair condition, the latches work and it has a 3 digit combination lock which I have the combination for. It has halliburton style latches with key holes. I don't have the key though. The part that engages when the latch is locked appears to be broken on the left latch, but the latch closes. It has some scratches on it, and needs a light cleanup on the outside. Has some light rust showing on the handle hardware and some of the rivets. It has solid foam in it. The foam in the lid is made from two pieces. There is about 2 1/2 inches air gap between the top and bottom foam when closed. This is a large case, it measures about 18 x 14 x 8 inches. Shipping weight it about 11 pounds.

http://i18.photobucket.com/albums/b145/jjleprikon/DSCF0593.jpg
http://i18.photobucket.com/albums/b145/jjleprikon/DSCF0585.jpg

===============================================
Zero Centurion Elite aluminum case. Its in good condition, the latches work and I have the keys for it. It has some scratches on it, but I don't recall any dents. It has solid foam in it. This is a large case, it measures about 20.5 x 17.5 x 6.5 inches. Shipping weight it about 11 pounds.

I'm asking $70.00 for this one.

I'll ship it if you pay for postage from Tracy CA 95376. **SOLD**

A Pelican 1300. It has holes drilled in it. The previous owner had electronics installed in it. Its inside dimensions are about 9.75 x 7 x 6 inches. It has the original foam in the top and 2 sheets of solid foam in the bottom that I cut from some extra sheets, this fills it up to about 1 inch from the top. Shipping weight is about 3.5 pounds and its too big to fit in a Priority Large Flat Rate box.
I'm asking $25.00 for this one. **SOLD**

one*eyed*jack
01-25-2011, 5:01 PM
Bump!

one*eyed*jack
01-26-2011, 4:32 PM
Bump!

one*eyed*jack
01-27-2011, 4:55 PM
Bump!

one*eyed*jack
01-28-2011, 5:36 PM
Bump!

one*eyed*jack
01-29-2011, 5:44 PM
Saturday Bump!

one*eyed*jack
01-30-2011, 5:25 PM
Bump!

crazy
01-31-2011, 10:33 PM
I might be interested in the first case. Sending a PM.

one*eyed*jack
02-02-2011, 12:05 PM
Bump!

one*eyed*jack
02-04-2011, 9:01 AM
Both still for sale.

one*eyed*jack
02-05-2011, 1:01 PM
Bump!

one*eyed*jack
02-07-2011, 9:25 AM
Added another Case - Bump!

one*eyed*jack
02-08-2011, 5:35 PM
Bump!

one*eyed*jack
02-09-2011, 5:42 PM
Bump!

one*eyed*jack
02-11-2011, 7:37 AM
Bump!

one*eyed*jack
02-14-2011, 6:49 AM
Bump!

one*eyed*jack
02-16-2011, 6:54 AM
Bump!

one*eyed*jack
02-17-2011, 11:11 AM
Bump!

one*eyed*jack
02-20-2011, 6:34 PM
Bump!

one*eyed*jack
02-23-2011, 6:53 AM
Bump!

one*eyed*jack
02-26-2011, 7:13 AM
Bump!

one*eyed*jack
02-27-2011, 3:42 PM
Bump!

one*eyed*jack
03-01-2011, 7:16 PM
Bump!

one*eyed*jack
03-03-2011, 7:49 PM
Bump!

one*eyed*jack
03-07-2011, 12:35 PM
Bump!

one*eyed*jack
03-08-2011, 2:29 PM
Bump!

one*eyed*jack
03-09-2011, 9:59 PM
Bump!

one*eyed*jack
03-13-2011, 5:30 PM
Bump!

one*eyed*jack
03-17-2011, 10:00 PM
Bump!

one*eyed*jack
04-02-2011, 11:26 AM
Bump!

one*eyed*jack
04-16-2011, 10:09 PM
Bump!

one*eyed*jack
04-22-2011, 2:34 PM
Bump!