View Full Version : Green Laser sight suggestions?

01-08-2011, 8:27 AM
Old guy here. I would like to put a green laser on a Marlin 795. JG has one for $79 that I'm considering. I'd have to figure out how to mout a 1" tube on the dove tail. http://www.jgsales.com/product_info.php/p/laser-sight-for-firearms%2C-green-long-range-high-intensity-/products_id/2096

I'd like to hear suggestions for a green laser on a .22 rimfire rifle.


01-08-2011, 8:38 AM
If by "old guy" you mean, it is getting hard to see the small spot on the target, then I don't see how a laser beam will help. If you can't see a tiny spot on the target how will you see a tiny laser beam spot that may or may not show up to well on some backgrounds. I work with lasers and they are not as easy to see in daylight as one may imagine.
Just spend the money on a better scope with more magnification. Keep the objective small for a bigger field of view and see if that helps.
Mounting is easy any 1" ring that fits the 795 will work. :)

01-08-2011, 7:41 PM
Marlin makes a stock for the 795 with a laser mounted in the fore end.


01-08-2011, 7:47 PM
Marlin makes a stock for the 795 with a laser mounted in the fore end.


Thanks sarge. Got a link?

01-08-2011, 8:23 PM
here is one that sold on guns america (a whole rifle)

http://www.google.com/imgres?imgurl=http://picturearchive.auctionarms.com/2118171422/8282376/9f1d3207e0f26b4e48a164a0d7d50c9c.jpg&imgrefurl=http://www.auctionarms.com/closed/displayitem.cfm%3Fitemnum%3D8282376.0&usg=__gdOXQ1JDTkxxuHpIyXKD8xpE704=&h=215&w=700&sz=14&hl=en&start=0&sig2=r54ecY1EKW0bRWkucdolxg&zoom=1&tbnid=e5KUNqE7LcNiXM:&tbnh=54&tbnw=177&ei=-UApTYPxO4LUtQOQjtmRBw&prev=/images%3Fq%3Dmarlin%2B795%2Blaser%2Bstock%26um%3D1 %26hl%3Den%26client%3Dfirefox-a%26sa%3DN%26rls%3Dorg.mozilla:en-US:official%26biw%3D1152%26bih%3D632%26tbs%3Disch: 1&um=1&itbs=1&iact=rc&dur=301&oei=-UApTYPxO4LUtQOQjtmRBw&esq=1&page=1&ndsp=16&ved=1t:429,r:1,s:0&tx=108&ty=27

this is a link for an aftermarket stock. Looks like it's $10 more than a new rifle!!

You might email Marlin and see if they have any.

It looks like it wouldn't be too difficult to do on your own, if you're mechanical. a hole parallel to the barrel and 3 adjustment screws (not visible on the factory stock - I am suggesting they be included to "zero" it with the bore).