PDA

View Full Version : Eotech 1moa (no ring) with quick disconnect


GlockBlocker
09-21-2010, 9:07 PM
I'm wanting to get an Eotech red dot sight with 1moa dot, no 65 ring, and the quick disconnect feature.

I think the EXPS line is what offers the quick disconnect, but I can't find one that has 1moa without the 65moa ring.

Any alternate suggestions?

DirtRacer151
09-21-2010, 9:12 PM
aimpoint with a QD mount? :D

voiceoftheright
09-21-2010, 9:16 PM
I'm pretty sure Eotech doesn't offer anything without the 65 MOA, that's why it's an Eotech. Aimpoint sounds like the sight you may want to look into more like DirtRacer151 said. And you can get the GG&G quick disconnect that will work on any Eotech.

erratikmind
09-21-2010, 9:18 PM
In the bright sunlight, I have my XPS2-0 set at a minimal setting. The 1moa dot is sharp and clear and the 65moa ring is not visible, unless I turn up the brightness setting.

SuperSet
09-21-2010, 9:21 PM
They do make a 1MOA without 65MOA ring (the -1 series) but the quick disconnect feature is only available on the EXPS models. And that model does not have the -1 series yet.
The best you can do is to get the XPS model (2-1 or 3-1, based on your NV needs) and get a LaRue LT110 mount or GGG mount.
http://www.eotech-inc.com/product.php?id=32&cat=4

Don29palms
09-21-2010, 9:23 PM
In the bright sunlight, I have my XPS2-0 set at a minimal setting. The 1moa dot is sharp and clear and the 65moa ring is not visible, unless I turn up the brightness setting.

I have a 517 and do the same thing.

GlockBlocker
09-21-2010, 9:25 PM
I'm pretty sure Eotech doesn't offer anything without the 65 MOA, that's why it's an Eotech. Aimpoint sounds like the sight you may want to look into more like DirtRacer151 said. And you can get the GG&G quick disconnect that will work on any Eotech.
The xps2-1 and 3-1 have a 1 MOA w/o the 65 MOA.

I'm looking through the Aimpoints and the lowest MOA I see is 2.

Any particular Aimpoint model? I think I'm set on 1 MOA so maybe I'll just go with a XPS2-1 and forget about the QD.

GlockBlocker
09-21-2010, 9:27 PM
hah, You guys answer too quick. Thanks for the info.

SuperSet
09-21-2010, 9:28 PM
Have you ever looked through a 2-1? Since the EOTech HUD is so large, finding a 1MOA dot is difficult.

voiceoftheright
09-21-2010, 9:30 PM
The xps2-1 and 3-1 have a 1 MOA w/o the 65 MOA.

I'm looking through the Aimpoints and the lowest MOA I see is 2.

Any particular Aimpoint model? I think I'm set on 1 MOA so maybe I'll just go with a XPS2-1 and forget about the QD.

I didn't know that the xps offered that option and that's super cool! Ya, haha as far as I know...Aimpoint only offers 2 and 4 MOA. I have a four though and if I turn it down it is pretty damn small still, enough to easily pick up clays at 30+ yards. If you can, check them all out. Either Eotech or Aimpoints are great, just depends on what you prefer. Some do both.

Don29palms
09-21-2010, 9:30 PM
Have you ever looked through a 2-1? Since the EOTech HUD is so large, finding a 1MOA dot is difficult.

I disagree!