View Full Version : Mag button lock idea

Cold Iron
05-11-2006, 7:58 AM
How 'bout this....drill and tap the lower for an 8-32 set screw at the end of the channel for the bolt release, leave the mag catch in place while drilling and divot the catch button for the set screw. Remove mag catch assy. and tap the hole, put mag catch assy. back and Loctite the set screw in. This fix REQUIRES action disassembly and does not compromise the integrity of the lower. Can be done with little more than a pistol drill, taps and drill bits are cheap. Also could be reversed by removing set screw. Not my Idea, I saw another thread that suggested an action disassembly solution. Cold Iron