PDA

View Full Version : Official 7.62 california legal self loading pics!


Pages : [1] 2 3 4 5 6 7

morepoop4u
04-29-2006, 2:21 AM
I'm bored so here's a pic of my work in progress:D. Fixed mag of course via screw in the TG.

My mini psl build. I'm still waiting on my Fal flash hider.
http://img90.imageshack.us/img90/4480/psl4yq.jpg


I finished demilling my 3 romy g's kits but now I need make my bolt cutter rivet squeezer. I also have 1 Ptr to go hehe.

ghostrider4evr
04-29-2006, 2:46 AM
http://i71.photobucket.com/albums/i160/ghostrider4evr/113-1363_IMG-2.jpg

I just picked this up the other day. Barrel needs a good cleaning and need to replace the furniture.

wayoutwest
04-29-2006, 9:29 AM
My first CA legal build 1971 Russian AKM on a DCI receiver, U.S. parts included: receiver, FCG, pistol grip, brake, floorplate.

http://www.gunco.net/gallery/data/500/medium/Russian_1971_6_.JPG

http://www.gunco.net/gallery/data/500/medium/Russian_1971_2_.JPG

wayoutwest
04-29-2006, 9:42 AM
Here is the the next build, a Polish kit on a DCI receiver which will become a permentaly fixed single shot. The gas port is sealed shut with high temp. silver solder. U.S. parts include: receiver, FCG, brake, stock, floorplate, follower



here is the insideof the gas block after filling with silver solder, I also had to shorten
the gas piston becasue of the solder
http://www.gunco.net/gallery/data/500/medium/IMG_0525.jpg

http://www.gunco.net/gallery/data/500/medium/IMG_0823.jpg

if you notice the hand guards it started life as a underfolder
http://www.gunco.net/gallery/data/500/medium/IMG_0822.jpg

it is currently a screw build with a broken tap in the rear block until I can
get someone to drill or mill it out. Then probably going to rivit it together

http://www.gunco.net/gallery/data/500/medium/IMG_0810.jpg

the wood was soaked in acetone to clean it and finished with a clear poly, the
metal was just roughed up with steelwool and degreesed, and sprayed with Alumni-
hyde II in a semi-gloss and then #000 steelwool

sintax
04-29-2006, 10:05 AM
wow that russian looks really amazing. Excellent job on that wood restore.

Snuffalofogus
04-29-2006, 2:13 PM
Hungarian SA85 built on a Global 1.6mm receiver (special thanks to wayoutwest for helping me with my first build.)


Before paint
http://picsorban.com/upload/406000071.jpg

After paint
http://picsorban.com/upload/40600010.jpg

buttstock looks discolored due to the painters tape being left on there for 2 days.

Wood looks normal now.

EBWhite
04-29-2006, 2:47 PM
way out west, where did you get that russian parts kit at :-)

And that polish side folder stock?? :-)

Snuffalofogus
05-03-2006, 8:49 PM
now complete with a fixed mag and a pistol grip!

http://picsorban.com/upload/40600011.jpg

PanzerAce
05-03-2006, 8:55 PM
My first CA legal build 1971 Russian AKM on a DCI receiver, U.S. parts included: receiver, FCG, pistol grip, brake, floorplate.

http://www.gunco.net/gallery/data/500/medium/Russian_1971_6_.JPG

http://www.gunco.net/gallery/data/500/medium/Russian_1971_2_.JPG

damn, that looks exactly what I am planning on building, where did you get that kit?

wayoutwest
05-03-2006, 9:02 PM
way out west, where did you get that russian parts kit at :-)

And that polish side folder stock?? :-)

My Russian kit came from JoeKen about 2 years ago, it was 1 of 2 I had. They pop up on gunbroker and the classifieds on ak-47.net now and again but will run about $350+

This stock isnt a folder, it is a FSE fixed krink style, I opted not to use the underfolder since I would have to fix it anyways and my receiver wasnt drilled for a underfolder.

Snuffalofogus
05-03-2006, 9:04 PM
My Russian kit came from JoeKen about 2 years ago, it was 1 of 2 I had. They pop up on gunbroker and the classifieds on ak-47.net now and again but will run about $350+

This stock isnt a folder, it is a FSE fixed krink style, I opted not to use the underfolder since I would have to fix it anyways and my receiver wasnt drilled for a underfolder.

so when do you want to go shootin?:cool:

five.five-six
05-03-2006, 9:08 PM
ok here is my 7.62 not yet done.... but close.. m1 garand will be next


1017

hung380
05-03-2006, 9:32 PM
i see alot of nice looking ak's and would like to know what kind of finishes did you guys use? I was looking at matte black for mine.

morepoop4u
05-04-2006, 5:58 PM
i see alot of nice looking ak's and would like to know what kind of finishes did you guys use? I was looking at matte black for mine.

moly resin

Here's the final piece of my offlist collection:D

http://img243.imageshack.us/img243/9539/ptr9os.jpg

grammaton76
05-05-2006, 2:35 AM
Here's the final piece of my offlist collection:D

PTR-91 receiver in the white from Ohio Rapid Fire, right? I was kinda thinking about one of those myself... then decided I'd wait up on those receivers since PTR-91's will need an add-on motion to make them a banned series, and I may as well wait up and buy a full rifle.

morepoop4u
05-05-2006, 3:09 PM
PTR-91 receiver in the white from Ohio Rapid Fire, right? I was kinda thinking about one of those myself... then decided I'd wait up on those receivers since PTR-91's will need an add-on motion to make them a banned series, and I may as well wait up and buy a full rifle.

Yup, I just picked it up yesterday after my 10 day wait. I'm cheap and I like DIY projects and this gives me another reason to practice my TIG welding.:D

shopkeep
05-08-2006, 12:09 AM
What's the deal with you PTR-91 guys anyhow :) ?

NeoWeird
05-08-2006, 12:22 AM
Yup, I just picked it up yesterday after my 10 day wait. I'm cheap and I like DIY projects and this gives me another reason to practice my TIG welding.:D

The welding part is the ONLY thing keeping me from building my own. Now that you have one, is there ANY built in indexing reference point type of thing in the receiver? Or is it just bored out and you have to personally time the barrel? If there is a way to index the barrel, I will do it myself; if not, I will buy a full rifle in the same manner that Grammaton (always wanted to ask, an Equilibrium fan?) described.

grammaton76
05-08-2006, 4:49 AM
If there is a way to index the barrel, I will do it myself; if not, I will buy a full rifle in the same manner that Grammaton (always wanted to ask, an Equilibrium fan?) described.

Yep... a former co-worker kept greeting me as "Cleric", and it just sorta caught on.

NeoWeird
05-08-2006, 4:56 AM
Yep... a former co-worker kept greeting me as "Cleric", and it just sorta caught on.

Everyone probably thought you guys were D&D dorks. :D

But then again what do they know. This of course brings up the question of whether or not we can get our ARs and AKs enchanted to +5 status...

morepoop4u
05-08-2006, 5:00 AM
What's the deal with you PTR-91 guys anyhow :) ?

because i want to build one like this

http://img65.imageshack.us/img65/633/fpwxyimg07617kx.jpg

grammaton76
05-08-2006, 5:52 AM
Everyone probably thought you guys were D&D dorks. :D

But then again what do they know. This of course brings up the question of whether or not we can get our ARs and AKs enchanted to +5 status...

You didn't know? The real reason we can't have pistol grips, is that it adds a 10% chance of vorpal shots whenever you roll a critical hit.

WHERE'S THE MOUNTAIN DEW?!?

...actually, the same former co-worker and my roomie and I were sitting in Fuddruckers earlier today, noting that someone needs to do a version of the Dead Alewives' D&D gamer skit (some folks know it as Summoner Geeks) as gun nuts.

...

DM: "Ok, you forgot to set your claymore, and now there are trolls, ok?"
Cheeto Fiend: "I've got Troll-slaying incendiary rounds in my M4! They've got a +9 against trolls!"
DM: "You're NOT THERE!"

PanzerAce
05-08-2006, 8:18 AM
You didn't know? The real reason we can't have pistol grips, is that it adds a 10% chance of vorpal shots whenever you roll a critical hit.

WHERE'S THE MOUNTAIN DEW?!?

...actually, the same former co-worker and my roomie and I were sitting in Fuddruckers earlier today, noting that someone needs to do a version of the Dead Alewives' D&D gamer skit (some folks know it as Summoner Geeks) as gun nuts.

...

DM: "Ok, you forgot to set your claymore, and now there are trolls, ok?"
Cheeto Fiend: "I've got Troll-slaying incendiary rounds in my M4! They've got a +9 against trolls!"
DM: "You're NOT THERE!"

http://forums.offtopic.com/images/smilies/laugh.gif
Damn, I dont know whats worse, that I think its a great idea, or that I actually got the joke.

Oh, and my rifles with have +5 cloaks of evilness on them once finished

Major Miner II
05-08-2006, 11:55 AM
Here's my SOCOM.

Just got the optics on over the weekend.

http://img.photobucket.com/albums/v701/Major_Miner_II/Stratics/scoped.jpg

morepoop4u
05-09-2006, 4:13 PM
I got my kit yesterday from dph and overall its a good kit but there are some small things that are bugging me. The TG is bent slightly and there are some dings. The tripple tree looks like a kid chiseled it off. Should I try to get and exchange or should I just fix it. The TG doesn't look too bad and I was thinking of getting the tripple tree without the grenade launcher.

http://img342.imageshack.us/img342/3015/tg5go.jpg
http://img289.imageshack.us/img289/1209/t325uh.jpg

rayra
05-10-2006, 11:54 PM
Here's two

http://img.photobucket.com/albums/v95/rayra/militaria/rifles.jpg

Charliegone
05-11-2006, 6:24 PM
I got my kit yesterday from dph and overall its a good kit but there are some small things that are bugging me. The TG is bent slightly and there are some dings. The tripple tree looks like a kid chiseled it off. Should I try to get and exchange or should I just fix it. The TG doesn't look too bad and I was thinking of getting the tripple tree without the grenade launcher.

http://img342.imageshack.us/img342/3015/tg5go.jpg
http://img289.imageshack.us/img289/1209/t325uh.jpg
You can get one(the triple frame) from numrich gun parts and they are very cheap. You can take off the grenade launcher by grinding it off if you wish or ask the builder to do it. It looks like you got a CETME kit?

morepoop4u
05-11-2006, 7:43 PM
Yah its a cetme. When I mod the trigger pack to semi do I still need to flick the selector up to fire (T)(S)(F)?

dwtt
05-11-2006, 9:10 PM
on my trigger group, it's up for safe and down for fire. But then, I have a semiauto trigger group.

Charliegone
05-11-2006, 11:01 PM
Yah its a cetme. When I mod the trigger pack to semi do I still need to flick the selector up to fire (T)(S)(F)?

Depends on your trigger housing. If you get one from JLD...most likely you will flick the selector down. It depends on the trigger housing! If you do the mods yourself, it will most likely stay the same.

morepoop4u
05-12-2006, 1:32 AM
I have another question about my cetme kit. On the bolt carrier the tube that holds the recoil spring has a groove in it and its all the way to where the the cocking handle mates, is that normal. I'll post pics later. Also do I need to modify my jld receiver to fit my cetme butt stock.

http://img102.imageshack.us/img102/5007/groove5vd.jpg

http://img238.imageshack.us/img238/7780/groove22og.jpg

ElBandito
05-12-2006, 11:43 AM
prior to being transfered to me
http://i40.photobucket.com/albums/e234/ChrisitoBandito/IMG_0996.jpg
http://i40.photobucket.com/albums/e234/ChrisitoBandito/IMG_0998.jpg

with her other friends
http://i40.photobucket.com/albums/e234/ChrisitoBandito/DSCN4830.jpg

C.G.
05-12-2006, 9:54 PM
Well, here is my HAR-25 with traditional A-2 stock.
http://www.sailmontereybay.com/Photos/A-2_AR-10.JPG

C.G.
05-12-2006, 9:56 PM
And there is the ACE stock version:
http://www.sailmontereybay.com/Photos/ACE_AR-10.JPG

C.G.
05-12-2006, 9:58 PM
Might as well throw in my DSA 58 PARA FAL:
http://www.sailmontereybay.com/Photos/PARAFAL.jpg

morepoop4u
06-02-2006, 11:39 PM
I finally got some free time to work on my romys. It's true about what they say about building an ak, it takes a lot of filing and more filing. I feel like I'm in an assembly line haha. I still have one to go.

http://img156.imageshack.us/img156/3963/group9kb.jpg

My newly made hf rivet crusher. If you want specs let me know.
http://img156.imageshack.us/img156/6052/rivet0tt.jpg

http://img156.imageshack.us/img156/4421/squish8zm.jpg

Long rivet crusher WIP
http://img156.imageshack.us/img156/3029/longr1yk.jpg

morepoop4u
06-06-2006, 7:24 PM
More progress pics. Barrels installed using the allthread method. Who needs expensive tools.

http://img128.imageshack.us/img128/7659/allthread4da.jpg

http://img462.imageshack.us/img462/5748/allthread27xw.jpg

http://img469.imageshack.us/img469/3416/pin2na.jpg

http://img469.imageshack.us/img469/9248/group3mx.jpg

Santa Cruz Armory
06-06-2006, 10:44 PM
So, heres a few pics of the mk-99 build with a Romy G kit.

http://i42.photobucket.com/albums/e346/BLFD1/P1010056.jpg
http://i42.photobucket.com/albums/e346/BLFD1/noserial.jpg
http://i42.photobucket.com/albums/e346/BLFD1/P1040070.jpg
http://i42.photobucket.com/albums/e346/BLFD1/P1043.jpg

It's an ITM reciever which took quite a bit of "massaging" to get everything to fit. I read somewhere that theres alot of filing when you build one of these...they're right.

I went with a kit that had been demilled, drilled and tapped already as I didnt really have the time to gather all the rivet stuff. The kit came in pretty good shape and the company provides everything needed to complete it minus the receiver, magazine and a few odds and ends. I went with a PG so I fixed the mag with a rather ugly screw that I had in my tool box.

Fitting and marking the receiver went pretty well. It took about two hours to make the templates, center punch the holes and drill out the receiver (I was using a hand drill) there was a little "widening" of two of the holes but all in all it went well.

There was a bit of filing to the front of the receiver that had to be done to get the front trunion to fit right but was pretty straight forward. The rear trunion fit good but I had to file on the stock a little to get the trunion to fit straight.

Once all that was done it was time to build up the FCG, that was easy, and had no issues there but, I did run into the normal bolt wont return problem. So as you can see I had to do a little grinding and polishing of the hammer to get it not to bind on the bottom of the bolt. After allowing myself a couple millimeters play in the hammer I ran into another problem...the disconnector wasn't catching so, back to the filing..... I had to take a little off of the disconnector to get it to catch the hammer when the bolt came back, a few times test fitting and I was good to go.

I have ran the snap caps through it a few dozen times or so and it all appears to work smooth. I'm off to the range on Thursday so I'll add a range report when I'm done.

I do recommend this receiver to people that have some time and the patience to work out the kinks of a build, and the basic tools (files, etc.) and a place to work comfortably and with ample light. As for the kit, I was very happy with how it went together. If anyone is interested in the dealer I got it from drop me a PM

soopafly
06-07-2006, 10:01 AM
this is for Unkownassailant...another pic of my workbench:p ...

My ADR "Area Defense Rifle" to go along with my PDR in the .223 thread
http://i61.photobucket.com/albums/h59/soopafly_photos/PICT0945-sm.jpg
http://i61.photobucket.com/albums/h59/soopafly_photos/PICT0944-sm.jpg

I took the easy route. Century Arms AES-10 and removed the pistol grip...POOF! it's SB23 compliant. And before anybody starts harping on the magazine, I bought it back in '93. Two 100rd Chinese drums along with my MAK90. I don't have the MAK90 anymore, though.:(

markymark
06-07-2006, 12:33 PM
this is for Unkownassailant...another pic of my workbench:p ...

My ADR "Area Defense Rifle" to go along with my PDR in the .223 thread
[]http://i61.photobucket.com/albums/h59/soopafly_photos/PICT0945-sm.jpg[/IMG]
[]http://i61.photobucket.com/albums/h59/soopafly_photos/PICT0944-sm.jpg[/IMG]

I took the easy route. Century Arms AES-10 and removed the pistol grip...POOF! it's SB23 compliant. And before anybody starts harping on the magazine, I bought it back in '93. Two 100rd Chinese drums along with my MAK90. I don't have the MAK90 anymore, though.:(
That is nice soopafly :cool:

markymark
06-07-2006, 12:35 PM
I just started my DROS on another complete AK. Vector Arms classic AK. Once I pick it up, I'll have to take a family picture of it and my Arsenal SA M7.

morepoop4u
06-07-2006, 5:39 PM
Upon request HF rivet tool.

http://img121.imageshack.us/img121/8853/bc4la.jpg:D

The result
http://img156.imageshack.us/img156/4421/squish8zm.jpg

You might need to grind down the rivets depending on which ones you get prior to install.

morepoop4u
07-03-2006, 3:30 AM
almost done haha... I still have to weld up a fixed triangle stock. No more AKs for me:p

http://img101.imageshack.us/img101/698/49sr.jpg

my mag lock http://www.calguns.net/calgunforum/showthread.php?t=36731

Pryde
07-03-2006, 4:13 AM
http://img.photobucket.com/albums/v698/sickeness/fal.jpg

hello there!

markymark
07-03-2006, 9:02 AM
[]http://img.photobucket.com/albums/v698/sickeness/fal.jpg[/IMG]

hello there!
Beautiful rifle. I'd like to buy one but I've already spent too much! :(

REDHORSE
07-03-2006, 11:58 AM
http://img48.imageshack.us/img48/273/brd012akm6oa.jpg

http://img48.imageshack.us/img48/8995/brd043l1a16ca.jpg

http://img48.imageshack.us/img48/3051/brd027fals5xv.jpg

Okami
07-03-2006, 2:54 PM
http://img48.imageshack.us/img48/273/brd012akm6oa.jpg

http://img48.imageshack.us/img48/8995/brd043l1a16ca.jpg

http://img48.imageshack.us/img48/3051/brd027fals5xv.jpg
Purty shootin' sticks ya got there!:eek:

~Okami

morepoop4u
07-10-2006, 3:57 AM
My final wip OLL project cetme/g3 clone

modded trigger pack
http://img151.imageshack.us/img151/859/shelf7oe.jpg

shelf
http://img133.imageshack.us/img133/7985/7206ac.jpg

mock up
http://img133.imageshack.us/img133/8434/cetme7sk.jpg

rorschach
07-10-2006, 10:27 AM
Heres my entry

http://i75.photobucket.com/albums/i309/tsol_roolz/96f7b106.jpg

Fixed mag PTR-91. May go gripless, waiting for a stripped housing to play with. Either way, next time you see it it will be a little different.

rorschach
07-10-2006, 4:46 PM
I got mine with the grip/FCG housing and flash suppressor not attatched to the rifle. I shimmed up the mag release with some tiny washers that I ground down to fit, then put it all together. It is a major PITA to load through the (HOT) ejection port. Im working on an easier way to fix the mag.

maxiss
07-10-2006, 5:12 PM
I am a new member as of today wanted to thank you all for this awesome site. I live here in Sol Cal and enjoy guns a lot. I started off with 1911 .45 and went on to .308 bolt action before I got into military surplus arms, SKS and other fun shooting Cal legal stuff. I was in the Army in 1986 so I looked into building a AR 15 but the only thing I came up with was the FAB 10 and The Bushmaster Cal Legal that had the mag wall welded...Looks wierd. If you guys can help with information on Ca legal AR 15 build that would be sweet and I would also like to know how to go about the Ca legal AK build.

Thanks,
Mark

blkA4alb
07-10-2006, 5:16 PM
I am a new member as of today wanted to thank you all for this awesome site. I live here in Sol Cal and enjoy guns a lot. I started off with 1911 .45 and went on to .308 bolt action before I got into military surplus arms, SKS and other fun shooting Cal legal stuff. I was in the Army in 1986 so I looked into building a AR 15 but the only thing I came up with was the FAB 10 and The Bushmaster Cal Legal that had the mag wall welded...Looks wierd. If you guys can help with information on Ca legal AR 15 build that would be sweet and I would also like to know how to go about the Ca legal AK build.

Thanks,
Mark
Welcome Mark,
The first thing you should do is read the FAQ in red at the top of all the pages. That will help you understand the current situation. If you have other basic questions (which you probably will) feel free to PM me. And remember, the search function is your friend :) .

grammaton76
07-10-2006, 5:20 PM
If you guys can help with information on Ca legal AR 15 build that would be sweet and I would also like to know how to go about the Ca legal AK build.

Easiest thing for you would be:

1. Do a bit of reading in the off-list forum. Also read the FAQ up at the top of the page for an overview of the law - what configurations are legal.
2. Decide whether fixed mags annoy you more than no 'evil features'.
3. Buy your rifle parts online - www.coldwarshooters.com and www.ddsranch.com are both very familiar with California issues.
4. Buy your California-compliance parts. If you go fixed, you want a fixed mag kit; if you want detachable mags, then you want either an SRB or a Monsterman grip.

datapusher
07-23-2006, 1:04 PM
Purty shootin' sticks ya got there!:eek:

~Okami

How are you able to have what appears to be a 30 rd magazine on the most evil looking of gun and still be California legal?

Any advice would be greatly appreciated.

JHC
07-23-2006, 1:57 PM
I'm pretty sure his are registered

Okami
07-23-2006, 2:12 PM
I'm pretty sure his are registered
+1

They are pretty nice, good job!

~Okami

REDHORSE
07-23-2006, 3:37 PM
How are you able to have what appears to be a 30 rd magazine on the most evil looking of gun and still be California legal?

Any advice would be greatly appreciated.

Yup, registered AWs.

xenophobe
07-23-2006, 4:27 PM
http://img145.imageshack.us/img145/1640/g3swl8.jpg

C.G.
07-23-2006, 5:29 PM
Xeno,
that looks like the SW 5.56 (not 7.62) or am I wrong? She's a beaut, though.

REDHORSE
07-23-2006, 5:31 PM
xenophobe, that picture doesn't look like a 7.62.. ;)

Looks like a S&W MP15, should go into the .223/5.56 thread...

C.G.
07-23-2006, 5:34 PM
xenophobe, that picture doesn't look like a 7.62.. ;)

Looks like a S&W MP15, should go into the .223/5.56 thread...

Beat you by two minutes!:D

xenophobe
07-23-2006, 6:03 PM
Xeno,
that looks like the SW 5.56 (not 7.62) or am I wrong? She's a beaut, though.

You guys are seein things ;)

C.G.
07-23-2006, 8:37 PM
You guys are seein things ;)

Hm, been told that before!:D

blkA4alb
07-24-2006, 12:20 AM
You guys are seein things ;)
Well I'm not seeing things, thats an HK G3, registered I assume. MP15? Come on guys.. :D

morepoop4u
07-24-2006, 12:33 AM
http://img145.imageshack.us/img145/1640/g3swl8.jpg

How does that bad boy shoot.:D I'm still waiting for parts to finsh my clone.

I caved and bought 1k of wolf classic from cabela using my $20 rebate. It was $147 shipped with 2 tubs. Now only if I stocked piled some back when it was $80:rolleyes:

http://img147.imageshack.us/img147/1995/ammoot0.jpg

blkA4alb
07-24-2006, 1:07 AM
How does that bad boy shoot.:D I'm still waiting for parts to finsh my clone.

I caved and bought 1k of wolf classic from cabela using my $20 rebate. It was $147 shipped with 2 tubs. Now only if I stocked piled some back when it was $80:rolleyes:

The G3 fires 7.62 NATO and not 7.62X39. Just making sure since it sounds like you bought the Wolf for your clone build :eek: . If you bought the wrong ammo I would be happy to help you out and take it off your hands for...80 bucks :D .

morepoop4u
07-24-2006, 1:22 AM
I ordered the ammo before I generously gave away my ak collection:D ;)

http://img101.imageshack.us/img101/698/49sr.jpg


I'll do $100 and I will throw in the rug haha.

Pryde
07-24-2006, 1:35 AM
The G3 fires 7.62 NATO and not 7.62X39. Just making sure since it sounds like you bought the Wolf for your clone build :eek: . If you bought the wrong ammo I would be happy to help you out and take it off your hands for...80 bucks :D .

I believe he bought that for his CA-AK which he posted earlier in the thread.

Edit: nvm poop beat me to it by 1 sec =D

morepoop4u
07-24-2006, 2:20 AM
I'm quick on the draw;)

Rums
07-24-2006, 2:24 AM
http://www.sundevilbroadcast.com/images/yugo.jpg

C.G.
07-24-2006, 9:15 AM
Well I'm not seeing things, thats an HK G3, registered I assume. MP15? Come on guys.. :D

Xeno deleted the MP-15, so you are seeing only the G3.

blkA4alb
07-24-2006, 10:23 AM
Xeno deleted the MP-15, so you are seeing only the G3.
Ohhhh, well that would explain it :D .

morepoop4u
09-08-2006, 2:44 PM
http://img283.imageshack.us/img283/1003/akoi5.jpg

Sighting in with irons @50 with wolf MC. Alittle windage and elevation and I was in the orange. The flyer was when a bee buzzed my ear:p

C.G.
09-08-2006, 2:51 PM
The flyer was when a bee buzzed my ear:p

Good one, I'll have to remember that one.

morepoop4u
09-08-2006, 2:53 PM
I can't help it that I'm sweet like huneey:D Bring some deet when you go to los altos rod and gun haha.

mailman
09-08-2006, 4:09 PM
http://i13.photobucket.com/albums/a297/Davebanger/082306_18131.jpg





.

Charliegone
09-08-2006, 4:32 PM
All these weapons of death (sarcasm) and I have posted nothing!!!!:eek:

ok. here it goes, mines a bit blurry...ehhmm someone obviously put their finger where they weren't suppose to.

Unfortunately I haven't had time to give a nice paint job (on the aks) don't worry about the forward grip on that one...its a .22.:D Also I took of that horrible mag lock and put in a prince50 one. Much better looking.:D

mailman
09-08-2006, 4:41 PM
whats with the ten rounders and no pistol grip? :confused:

Charliegone
09-08-2006, 4:42 PM
whats with the ten rounders and no pistol grip? :confused:

I have 30rdrs. I just didn't put em in the pic.:D Can't use my 30's with a pistol grip...

JPglee1
09-08-2006, 4:44 PM
whats with the ten rounders and no pistol grip? :confused:

He prolly doesn't own any 30s and thats the best he can do with a detachable mag :D

You guys both need some SAIGA stocks and FCGs tho...darn that looks un comfortable to shoot.


J

JPglee1
09-08-2006, 4:44 PM
I have 30rdrs. I just didn't put em in the pic.:D Can't use my 30's with a pistol grip...

You can use em without tho :D

J

Charliegone
09-08-2006, 4:47 PM
You can use em without tho :D

J

true. :D
I got the tapco FCG in mine. Pretty easy to put in. Only thing I had trouble was with the wire retaining spring. Think is a b***h to put in.
On the handling...I got huge hands so thats no problem.

Q
09-08-2006, 8:43 PM
http://i108.photobucket.com/albums/n32/qbertquartz2/DSC05267-1.jpg

69Mach1
09-10-2006, 12:25 PM
Ready for action.:D By the way, that's a Romanian PSL muzzle brake threaded on there. It fits just fine. I know, I need better wood on there.
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY244.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY240.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY246.jpg

PanzerAce
09-10-2006, 12:27 PM
69, I think you need a bipod now :D

69Mach1
09-10-2006, 12:32 PM
69, I think you need a bipod now :D

Yeah, I know. With 75 rounds on tap, this sucker is heavy.

xrMike
09-10-2006, 12:37 PM
So THAT's what the inside of a drum mag looks like... cool.

rssslvr
09-10-2006, 12:46 PM
Where did you get the PSL brake?I really like it.

69Mach1
09-10-2006, 12:50 PM
Where did you get the PSL brake?I really like it.

Off of a PSL;)

Cato
09-10-2006, 1:38 PM
"I know, I need better wood on there."


The downside of those Romy kits is the ugly wood and that forward pistol grip. Your drum mag rocks though!

Charliegone
09-10-2006, 2:38 PM
Ready for action.:D By the way, that's a Romanian PSL muzzle brake threaded on there. It fits just fine. I know, I need better wood on there.


sweet! Let me use your 75rdr on my ak!:D

PanzerAce
09-10-2006, 4:32 PM
"I know, I need better wood on there."


The downside of those Romy kits is the ugly wood and that forward pistol grip. Your drum mag rocks though!

meh, my romy kit has pretty good looking wood on it IMHO

rssslvr
09-10-2006, 4:35 PM
The first Romy kit I got the wood was so so.The second one I got the wood looked almost perfect

morepoop4u
09-10-2006, 6:09 PM
Ready for action.:D By the way, that's a Romanian PSL muzzle brake threaded on there. It fits just fine. I know, I need better wood on there.
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY244.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY240.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY246.jpg

Where's your bump fire video muahahaha!!!

rorschach
09-23-2006, 12:59 AM
http://i75.photobucket.com/albums/i309/tsol_roolz/HK001.jpg
Yup!! Heres my birthday present to myself on top: PRK compliant HK911 (unlisted!), IK (1989) datecode. The 911's were essentially 91's that were imported before the 1989 import AW ban. They could not be sold as they were deemed non-sporting, so HK USA unscrewed the FH and PG, added a Bell Carlson thumbhole stock and thread protector, and restamped the receiver with an extra "1". In order for me to add a FH and PG, I needed to swap in a bunch of US parts to make it 922 compliant, much like an AK or G3 build. To make it SB23 compliant, I added my magazine lock and a riveted/epoxied 20/10 G3 magazine. It does need a barrel though, but it was a good buy and I'm stoked to have a gennie Oberndorf rifle now. Lower from RobertRTG, internals from JLD, forearm and bipod from Top Notch. Previous owner already did a paddle mag release, next up is a rebarrel with a JLD unit.

Bottom of above pic is my good ol PTR, also with fixed 10 rounder. Waiting for one fine day when I can move out of this state, drop the magazine lock, and SBR it. Registered sear pack would be nice too, lotto winnings permitting.

BTW pardon my piss poor pics, I cant take a photo worth a crap.

http://i75.photobucket.com/albums/i309/tsol_roolz/HK911markings.jpg

Charliegone
09-23-2006, 8:58 PM
Ok heres some better pics...

The ar is a stag lower with delton upper, stock etc. Fixed mag device provided by 10% of the prince 50 kind.:D I managed to refinish one of my ak's in alumahyde II (the purty black one) it came out well except that it takes fooooreeevver to dry and cure. The other one is yet to be tested, so can't paint it yet. The ptr is not complete (and yes its fixed mag) I'm probably not going to use that barrel but the 24" heavy barrel I bought some time ago.

Man lucky guy...you got an hk 911..sweet.:D

markymark
09-23-2006, 9:07 PM
Ok heres some better pics...

The ar is a stag lower with delton upper, stock etc. Fixed mag device provided by 10% of the prince 50 kind.:D I managed to refinish one of my ak's in alumahyde II (the purty black one) it came out well except that it takes fooooreeevver to dry and cure. The other one is yet to be tested, so can't paint it yet. The ptr is not complete (and yes its fixed mag) I'm probably not going to use that barrel but the 24" heavy barrel I bought some time ago.

Man lucky guy...you got an hk 911..sweet.:D
Have you tried shooting the AK without the PG yet? I took mine out last Thursday and the damn thing kept slapping me in the face, even with a good cheek weld. :o

Charliegone
09-23-2006, 10:01 PM
Have you tried shooting the AK without the PG yet? I took mine out last Thursday and the damn thing kept slapping me in the face, even with a good cheek weld. :o

Yup. It was pretty stable for me. I kind of hold it with my thumb on the upper part and the rest of my fingers (excluding trigger) on the bottom part of the receiver and stock. I did get a bit of slap but it went away as I adjusted myself.:D

69Mach1
10-17-2006, 7:50 AM
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY473.jpg

brasscoe
10-17-2006, 10:58 AM
because i want to build one like this

http://img65.imageshack.us/img65/633/fpwxyimg07617kx.jpg

What kind of stock is that and where to do I buy it! Searched Gunbroker and gunsamerica for it, and no luck.

C123K_LoadMaster
10-17-2006, 1:09 PM
What kind of stock is that and where to do I buy it! Searched Gunbroker and gunsamerica for it, and no luck.

Itís a MSG90 adjustable buttstock with improved buffer system. They were standard on the H&K SR9T. See pictures below of a registered SR9T with factory MSG90 adjustable buttstock.

http://www.fototime.com/83F9F9581AFA813/standard.jpg

http://www.fototime.com/1482494C1176930/standard.jpg

brasscoe
10-17-2006, 3:54 PM
Itís a MSG90 adjustable buttstock with improved buffer system. They were standard on the H&K SR9T. See pictures below of a registered SR9T with factory MSG90 adjustable buttstock.


Awesome, found a reproduction stock discussed in this thread:
http://www.hkweaponsystems.com/cgi-bin/forums/ultimatebb.cgi?ubb=get_topic&f=14&t=000041

Thinking of ordering one for a PTR-91 being DROS'd now...

morepoop4u
10-22-2006, 3:07 PM
My sks sniper:D

http://img439.imageshack.us/img439/1755/1ex7.jpg

http://img190.imageshack.us/img190/4636/2uw7.jpg

http://img72.imageshack.us/img72/3084/3fy3.jpg

morepoop4u
10-22-2006, 3:07 PM
Damn picture limits:rolleyes:

http://img212.imageshack.us/img212/9458/5ie5.jpg

mosin nagant mount
http://img48.imageshack.us/img48/7941/4vn4.jpg

morepoop4u
10-22-2006, 4:47 PM
What kind of stock is that and where to do I buy it! Searched Gunbroker and gunsamerica for it, and no luck.

you can buy it here

https://www.shop.black-market-parts.com/displayProductDocument.hg?productId=8&catego

sned45
10-22-2006, 5:04 PM
does this count
http://www.mindspring.com/~sned/gun/zIMG_0236.JPG

morepoop4u
10-22-2006, 7:08 PM
now mount it on a old toyota truck.:D

Bagger
10-23-2006, 7:01 PM
because i want to build one like this

http://img65.imageshack.us/img65/633/fpwxyimg07617kx.jpg

Im wanting to build one myself need to pickup my PTR reviever at the end of the week.
trying to find the Hk 91 wide forearme grip in black

pc_city
10-23-2006, 7:23 PM
Benelli R1 in .308 w/ 10 round mag
http://members.aol.com/riveter/Dsc00375.jpg
shoots <1moa w/Winchester 150 gr. ballistic silvertip. SA surplus around 1.75 moa.

morepoop4u
10-23-2006, 7:30 PM
Im wanting to build one myself need to pickup my PTR reviever at the end of the week.
trying to find the Hk 91 wide forearme grip in black

I ordered it from top notch and its was on sale for $75 shipped before.
http://www.top-notchparts.com/toppage2.htm

NeoWeird
10-23-2006, 9:04 PM
My first 100% finished OLL. It's cheap. It's crappy. It's mine.

http://i23.photobucket.com/albums/b354/NeoWeird/myak2.jpg

rorschach
10-23-2006, 10:53 PM
+1 for Top Notch Parts. Wade is a great guy to deal with.

You guys can also find killer HK parts deals on sturmgewehr.com and HKpro.com I see MSG and PSG stocks for sale all the time.

Robert Johnson (robertrtg.com) has lots of surplus HK stuff too. Gordon Miller (hkspecialist.net) has brand spankin' new HK parts, and his pricing reflects this.

Charliegone
10-23-2006, 11:04 PM
+1 for Top Notch Parts. Wade is a great guy to deal with.

You guys can also find killer HK parts deals on sturmgewehr.com and HKpro.com I see MSG and PSG stocks for sale all the time.

Robert Johnson (rtgparts.com) has lots of surplus HK stuff too. Gordon Miller (hkspecialist.net) has brand spankin' new HK parts, and his pricing reflects this.

+1 for Top Notch as well, Wade is a cool guy. Never had problems with them.
Also, yes Gordon's parts are very expensive, BUT remember you are getting genuine h&k stuff and NEW.:D

Crazed_SS
10-24-2006, 1:58 PM
Here are my two!

http://members.cox.net/web0/m1a/IMG_0810.jpg

xrMike
10-24-2006, 2:44 PM
My first 100% finished OLL. It's cheap. It's crappy. It's mine.Not cheap or crappy at all, looks pretty cool to me.

sniper_jay
10-24-2006, 4:44 PM
now that i'm interested in building one of these babies, how da heck do you top load the magazine if it's fixed on there?? i'm not familiar with the ak type rifles but can you easily take the top down like you do with the ar15's?? and how do i get started if i wanna build one?

NeoWeird
10-24-2006, 4:44 PM
Not cheap or crappy at all, looks pretty cool to me.

See it in person and then tell me that. :D

DrjonesUSA
10-24-2006, 10:29 PM
Rorshach:

What is your opinion of HK vs. PTR quality, since you own both?

THanks!

Tweak338
10-24-2006, 11:37 PM
Neo, why in the world did you use gloss black? it would look even better if you went flat.. BTW nice crappy Ak:D

NeoWeird
10-25-2006, 12:21 AM
Neo, why in the world did you use gloss black? it would look even better if you went flat.. BTW nice crappy Ak:D

I actually LIKE the gloss black look over the matte finish black. If it was matte it would have all looked very similar and had not much color variation. Besides, in person it looks better color wise because the flash from the camera makes the gloss black look a bit more glossy than it is in person. Besides, if it turns out I don't like it all it takes is $1.50 in break cleaner to strip the rifle clean again...ask me how I know.

Pryde
10-25-2006, 12:32 AM
Sorry,
Can't resist posting the parafal

http://img.photobucket.com/albums/v698/sickeness/ca-parafal.jpg

Addax
10-26-2006, 4:31 PM
Here is a pick of my 7.62 Cali Legal AK rifles

http://i143.photobucket.com/albums/r144/k43qve/000_0032.jpg

Addax
10-26-2006, 4:35 PM
Here are my 2 Cali Legal Fals (I have 2 more on the way)

The top one is my STG58.
The bottom on is an Australian L2a1
Both built on Imbel mfg. receivers.
Both were built by ARS (Arizona Response Systems).

My other 2 comming in are an Izzy Custom Carbine and a DSA L1a1 (will post pics when I get them in).

Enjoy

http://i143.photobucket.com/albums/r144/k43qve/000_0033.jpg

Addax
10-26-2006, 4:36 PM
One more of the STG58

http://i143.photobucket.com/albums/r144/k43qve/000_0035.jpg

Addax
10-26-2006, 4:37 PM
One more of my L2a1

http://i143.photobucket.com/albums/r144/k43qve/000_0034.jpg

luvtolean
10-26-2006, 4:50 PM
Here is a pick of my 7.62 Cali Legal AK rifles

Nice set of Arsenals there!

The third one down with the 74 style brake, is it a 7.62?

Addax
10-26-2006, 4:53 PM
Thanks,

By far Arsenals are my favorite, with Armory USA's a very close second.

The one on top is from Armroy USA.

Yup, it is a 7.62.

I installed a US mfg. 24mm 74 Brake made for 7.62.

luvtolean
10-26-2006, 5:07 PM
Arsenal lists a 5.45 milled receiver gun, but I've never been able to find one.

Was just wondering if that was one.

I really dig my SAM-7 Carbine. :D

Addax
10-26-2006, 5:10 PM
Arsenal lists a 5.45 milled receiver gun, but I've never been able to find one.

Was just wondering if that was one.

I really dig my SAM-7 Carbine. :D

You and me both!!!

A very limited run, there were more .223 and 7.62 made.

I even know the owner at Arsenal inc. and he does not have any laying around...

I have a .223 Arsenal SA on its way to me, but it took me a couple of months to find one (that was not priced at $900).

nudavinci
10-26-2006, 6:35 PM
can anyone pm me links for all the stuff i need to build:

Fal
PTR90
AK

I would like to start before I cant do it anymore.

Okami
10-26-2006, 7:19 PM
You and me both!!!

A very limited run, there were more .223 and 7.62 made.

I even know the owner at Arsenal inc. and he does not have any laying around...

I have a .223 Arsenal SA on its way to me, but it took me a couple of months to find one (that was not priced at $900).
I had a K101 in 5.56 and a SSR-99 in 7.62x39 back in the day.
Course, that was when i was living in Washington State:rolleyes:

markymark
10-26-2006, 7:26 PM
Here is a pick of my 7.62 Cali Legal AK rifles

Nice to see that there are Arsenals coming into CA. :)

Here's a blurry picture of my off-list rifles:
Arsenal SA-M7 2nd from top
Vector AK built on Armory receiver 3rd from top
http://i12.photobucket.com/albums/a221/markkim/IMG_1108.jpg

69Mach1
10-26-2006, 9:41 PM
Here is a pick of my 7.62 Cali Legal AK rifles

http://i143.photobucket.com/albums/r144/k43qve/000_0032.jpg

Very nice K43qve. My condolences to your credit card.:D

Addax
10-26-2006, 10:52 PM
Very nice K43qve. My condolences to your credit card.:D

Thanks Good Buddy!

May my credit card rest in peace ;)

Addax
10-26-2006, 10:54 PM
Nice to see that there are Arsenals coming into CA. :)

Here's a blurry picture of my off-list rifles:
Arsenal SA-M7 2nd from top
Vector AK built on Armory receiver 3rd from top
http://i12.photobucket.com/albums/a221/markkim/IMG_1108.jpg

Don't you love the feel and the quality in the Arsenal rifles..:D

How do you like your Vector built AK?

Charliegone
10-26-2006, 10:58 PM
Very nice K43qve. My condolences to your credit card.:D

Holy crap man.. I bet those milled ones cost you around 700 bucks each! Love the rpk....bastard...:D

markymark
10-26-2006, 11:03 PM
Don't you love the feel and the quality in the Arsenal rifles..:D

How do you like your Vector built AK?
I haven't shot the Arsenal yet but it's definitely built very well. I should take it out the next time I head out to the range and get it sighted in.

The Vector is a pretty nice rifle too. I went with them because they provide a 5 yr warranty and I've only heard good things about their rifles.

Addax
10-26-2006, 11:16 PM
I haven't shot the Arsenal yet but it's definitely built very well. I should take it out the next time I head out to the range and get it sighted in.

The Vector is a pretty nice rifle too. I went with them because they provide a 5 yr warranty and I've only heard good things about their rifles.

Cool, I have heard good things about Vector also.

I will check them out, I just love to have some variety in my collection ;)

Addax
10-26-2006, 11:20 PM
Holy crap man.. I bet those milled ones cost you around 700 bucks each! Love the rpk....bastard...:D

Yeah, right at around $700 a pop, the rpk was $900.

I almost skipped on the rpk, but I am sure glad I changed my mind at the last minute.. When my dealer received it, he and everyone in his shop were just in awe, they really loved it... Beautiful rifle and nicely built.

I will provide a range report soon when I get her out and break her in.

markymark
10-26-2006, 11:23 PM
Cool, I have heard good things about Vector also.

I will check them out, I just love to have some variety in my collection ;)
I can tell ;)
I picked up the Arsenal first and wanted more variety too, so I went for a more traditional looking AK with slant brake, slanted gas block, and wood furniture. Looking at your Arsenals, I kind of want another one :o . Actually I think I'm done with semi auto rifles for now and my next rifle will prob be a nice bolt action.

markymark
10-26-2006, 11:24 PM
Where do you go to shoot by the way? It would be cool if we Southern California Calgunners could have a get-together.

Addax
10-26-2006, 11:26 PM
I can tell ;)
I picked up the Arsenal first and wanted more variety too, so I went for a more traditional looking AK with slant brake, slanted gas block, and wood furniture. Looking at your Arsenals, I kind of want another one :o . Actually I think I'm done with semi auto rifles for now and my next rifle will prob be a nice bolt action.

I hear that.

I am working on obtaining a Rem 700 in .338 Rem Magnum with a Weaver scope, gray laminate stock, in the Rem Satin Silver finish, barrel drilled muzzle brake and custom trigger work... Will post pics soon.

She is used, but only shot several times during a hunting trip, and I know the guy who is selling her.

markymark
10-26-2006, 11:29 PM
I hear that.

I am working on obtaining a Rem 700 in .338 Rem Magnum with a Weaver scope, gray laminate stock, in the Rem Satin Silver finish, barrel drilled muzzle brake and custom trigger work... Will post pics soon.

She is used, but only shot several times during a hunting trip, and I know the guy who is selling her.
You have a neverending supply of money! :eek:

Addax
10-26-2006, 11:35 PM
Lets just say that I have made some really good firearms investments which are now paying off. ;)

Charliegone
10-26-2006, 11:36 PM
So far I have 2 Ewbanks ak's built and 1 armory USA ak built all by me. I must say after the first and second ones the third one (the armory usa) was pretty easy. Just took me one day (or rather half a day) to demill and one day put together. All rivets except front upper four holes which I udrived. Shot one already and works perfect. Just need to try my other two...heck man lets have a Southern California ak get together at a local range.:D

BTW I still have an ak-74 receiver to build up on...2 or 3 just isn't enough...heck man now I want an rpk!:D

Addax
10-26-2006, 11:42 PM
So far I have 2 Ewbanks ak's built and 1 armory USA ak built all by me. I must say after the first and second ones the third one (the armory usa) was pretty easy. Just took me one day (or rather half a day) to demill and one day put together. All rivets except front upper four holes which I udrived. Shot one already and works perfect. Just need to try my other two...heck man lets have a Southern California ak get together at a local range.:D

BTW I still have an ak-74 receiver to build up on...2 or 3 just isn't enough...heck man now I want an rpk!:D

I have a Polish Tantal being built (should be done end of November if all goes well) and a Polish AKM being built on new Armory USA 1.6mm receivers.

In fact the rifle on top is an AK47 built on one of the new Armory USA 1.6mm receivers using a Bulgarian kit.

I really like their new receiver, funny how .6mm makes the receiver feel more solid almost like a milled receiver.

BTW, where did you find the AK74 kit?
PM me and lets discuss.

nudavinci
10-27-2006, 12:07 AM
wheres the best place to get ak parts/reciever.. i really want to try my hand at building one up myself... ive built several ar's now i must tread to the other side ..

Q
10-27-2006, 1:05 AM
Here is a pick of my 7.62 Cali Legal AK rifles

http://i143.photobucket.com/albums/r144/k43qve/000_0032.jpg

nice. i've been wanting to get a sa m7 and a ssr. glad to see i won't be the only one.

Addax
10-27-2006, 1:17 AM
nice. i've been wanting to get a sa m7 and a ssr. glad to see i won't be the only one.

Be careful, I believe the SSR and SLR Arsenal rifles are listed.

The SA and SAS models are ok.

Get one before they are gone, Arsenal Inc. is not currently producing the SA and SAS models and only plan limited runs in the future.

Q
10-27-2006, 3:13 PM
Be careful, I believe the SSR and SLR Arsenal rifles are listed.

The SA and SAS models are ok.

Get one before they are gone, Arsenal Inc. is not currently producing the SA and SAS models and only plan limited runs in the future.

yeah that sucks how all the new arsenals are named slr. :(
i believe the armory ssr85c2 is ok. that is the ssr i want. i will double check the list before ordering mine.
congrats you have a sweet collection of collectables. you need a couple more woodies in there.:)

Addax
10-27-2006, 3:45 PM
yeah that sucks how all the new arsenals are named slr. :(
i believe the armory ssr85c2 is ok. that is the ssr i want. i will double check the list before ordering mine.
congrats you have a sweet collection of collectables. you need a couple more woodies in there.:)

In the pic, the very top rifle is an Armory USA SSR85C2. I have 2 of these now and 2 more being built. I have one woody, another being built on a Polish kit with laminate wood.

Really well built and rugged. They use either Bulgarian or Polish Kits currently.

insin
10-29-2006, 9:56 AM
Double Trouble

adamsreeftank
10-29-2006, 8:15 PM
Double Trouble



Very nice. Very Nice.

DrjonesUSA
10-29-2006, 11:31 PM
......................

insin
10-29-2006, 11:40 PM
Nice.......

NeoWeird
10-30-2006, 1:53 AM
That looks like an Imbel gear logo...

Where is everyone finding these things?

DrjonesUSA
10-30-2006, 9:11 AM
That looks like an Imbel gear logo...

Where is everyone finding these things?


You just gotta look around and when you find one (or two), JUMP on it!!

If you want an excellent source, please PM me.

Thanks

DrjonesUSA
10-30-2006, 9:24 AM
That looks like genuine German HK furniture. Definate not standard on the PTR


Yep, that's what I thought too. I'm not sure if JLD used to use real German furniture on their older guns or not.

Can anyone tell me more about that grip: Is that from an HK91 or G3? I've seen a few of those grips for sale, but they didn't have the steel protrusion with holes for the retaining pins.

To illustrate, compare these two trigger groups:

http://www.robertrtg.com/g3sefplastic.html

http://www.robertrtg.com/g3seflower.html

Notice that the plastic one has a steel protrusion to the rear with holes in it where the retaining pins keep it locked into the gun: the G3 "SEF" trigger group does not have this, so how does it stay locked into the gun, and how would it fit onto a PTR? :confused:

Also, does anyone know if the real HK buttstocks had real rubber recoil pads?

Thanks

insin
10-30-2006, 10:12 AM
That looks like an Imbel gear logo...

Where is everyone finding these things?

Luck I guess... (Its the only way these days.)

JHC
10-30-2006, 6:17 PM
MM gripped bumping machine


http://i48.photobucket.com/albums/f242/crash76/1202061617.jpg

insin
10-30-2006, 6:25 PM
Also, does anyone know if the real HK buttstocks had real rubber recoil pads?

Thanks
I have seen rubber recoil pads for sale for HK buttstocks.

10TH AMENDMENT
10-31-2006, 8:17 AM
In the pic, the very top rifle is an Armory USA SSR85C2. I have 2 of these now and 2 more being built. I have one woody, another being built on a Polish kit with laminate wood.

Really well built and rugged. They use either Bulgarian or Polish Kits currently.

K43qve:

How did you get your SSR85C2 by Armory USA / Global Trades into California? I am under the impression that distributors like Atlantic Firearms will not make them SB23/PC12276.1 compliant and ship them to our willing FFL's here.

markymark
10-31-2006, 10:07 AM
K43qve:

How did you get your SSR85C2 by Armory USA / Global Trades into California? I am under the impression that distributors like Atlantic Firearms will not make them SB23/PC12276.1 compliant and ship them to our willing FFL's here.
I know your question was not addressed to me, but I can give you an answer. You can order the SSR85C2 and have it shipped to Spreadfire (http://www.spreadfirearms.com/index.html). They will make the rifle CA compliant and ship it out to your FFL for a nominal fee.

The other option would be to ask Atlantic (who knows, they might be willing to help out CA customers ;) ) and have them make the rifle CA compliant before having it shipped out to your FFL.

rorschach
10-31-2006, 12:28 PM
Yep, that's what I thought too. I'm not sure if JLD used to use real German furniture on their older guns or not.

Can anyone tell me more about that grip: Is that from an HK91 or G3? I've seen a few of those grips for sale, but they didn't have the steel protrusion with holes for the retaining pins.

To illustrate, compare these two trigger groups:

http://www.robertrtg.com/g3sefplastic.html

http://www.robertrtg.com/g3seflower.html


Notice that the plastic one has a steel protrusion to the rear with holes in it where the retaining pins keep it locked into the gun: the G3 "SEF" trigger group does not have this, so how does it stay locked into the gun, and how would it fit onto a PTR? :confused:

Also, does anyone know if the real HK buttstocks had real rubber recoil pads?

Thanks

I dont know if JLD used gennie HK furniture on their older models either- my PTR91K came with a FMP stock, JLD navy lower, and JLD aluminum foregrip- all swapped out for real HK units.

As far as the G3 grips, some have holes, some dont. Doesnt matter, the stock slides over this tang, and wedges it into place. Be advised, standard G3 lowers (with pivot holes in the front) will NOT fit any semi-auto weapons (PTR, Vector, HK91, SR9) without first being "clipped and pinned" to fit the shelf welded on the magwell of semi-auto receivers to prevent full auto triggerpacks from being used. There are many suppliers (robertrtg and hkspecialist.net to name a few) that sell new already-clipped lowers, and many HK smiths clip and pin full auto SEF lowers for around 40-50 bucks or so. Some PTR's are now coming with JLD's new "navy style" plastic lower, the steel ones I have seen are no doubt standard G3 lowers that have been clipped, with the "F" position detent and letter filled in with silver solder.

Aside from the G3 collapsible stock, none of my real HK G3 stocks came with rubber pads. However, you can get a rubber recoil pad for an HK21 machine gun and it will swap directly onto a standard G3 stock.

Here's my HK911 (top) clipped/pinned SEF grip from RobertRTG, HK foregrip and bipod from Top Notch. Bottom is a PTR91K, HK foregrip also from Top Notch, A4 stock from RobertRTG and MP5 SEF grip from Gordon Miller (hkspecialist.net). Both Kali legal, G3 10/20 lookalikes and maglocks of my own design.

http://i75.photobucket.com/albums/i309/tsol_roolz/HK001.jpg

BTW nice rifle insin!! Keep the HK's comin' fellas!!!

Addax
10-31-2006, 12:49 PM
I PM'd you regarding your question.

K43qve:

How did you get your SSR85C2 by Armory USA / Global Trades into California? I am under the impression that distributors like Atlantic Firearms will not make them SB23/PC12276.1 compliant and ship them to our willing FFL's here.

insin
10-31-2006, 1:40 PM
Bottom is a PTR91K, HK foregrip also from Top Notch, A4 stock from RobertRTG and MP5 SEF grip from Gordon Miller (hkspecialist.net).
BTW nice rifle insin!! Keep the HK's comin' fellas!!!

Hey rorschach, what is the overall length of your rifle with the adjustable stock when fully closed? Is it over the minimum 30"?

JPglee1
10-31-2006, 1:42 PM
Hey rorschach, what is the overall length of your rifle with the adjustable stock when fully closed? Is it over the minimum 30"? I was thinking about getting that stock, however was worried the rifle wouldnt meet the minimum 30" requirement.

My guess is at least 35"

JP

rorschach
10-31-2006, 4:18 PM
Hey rorschach, what is the overall length of your rifle with the adjustable stock when fully closed? Is it over the minimum 30"? I was thinking about getting that stock, however was worried the rifle wouldnt meet the minimum 30" requirement.

31 1/2" when closed.

DrjonesUSA
10-31-2006, 11:30 PM
Dumb question, but why are they called "Navy" lowers?

Rorschach: as someone who owns both an HK and PTR, how do the two compare in quality and fit and finish?

rorschach
11-02-2006, 5:58 PM
I read somewhere that the German Navy was one of the first units to order these plastic lowers in any quantity. Please to note that MP5 lowers are also plastic, but have a thumbswell and finger grooves. Navy style lowers have a straight grip, with no finger grooves.

I would say the PTR is at least equal to the genuine HK as far as fit, finish etc. I do like the PTR's sights more than the HK sights (the HK has a v-notch at the first position, PTR has peephole in all 4 positions). About the only thing the HK really has over the PTR is that it says "HK" on the magwell.

DrjonesUSA
11-04-2006, 11:11 AM
I read somewhere that the German Navy was one of the first units to order these plastic lowers in any quantity. Please to note that MP5 lowers are also plastic, but have a thumbswell and finger grooves. Navy style lowers have a straight grip, with no finger grooves.

I would say the PTR is at least equal to the genuine HK as far as fit, finish etc. I do like the PTR's sights more than the HK sights (the HK has a v-notch at the first position, PTR has peephole in all 4 positions). About the only thing the HK really has over the PTR is that it says "HK" on the magwell.


Thanks for your response. So why did the navy order those specific grips? Because they are plastic and obviously less apt to corrode like the metal grips?

Which is more comfortable in your hand; the Navy or the SEF?

I've handled a few Navy-gripped clones and I'm not too thrilled with the way they feel, but I haven't handled an SEF for comparison.

The SEF sure looks like it would be much more comfortable.

One last question (and I really do appreciate your help) but on the PTR's I've seen, they come from the factory with a stock that belongs on a super soaker. I take it you have a real HK stock on your 911?

If so, does it have a real rubber butt pad? The craptastic JLD stock slides around like crazy and seems quite unsafe to me.

Is that an HK91 stock or G3 stock that you have?

Thanks again for your help. :)

rorschach
11-04-2006, 12:07 PM
So why did the navy order those specific grips? Because they are plastic and obviously less apt to corrode like the metal grips?
I have no idea, lighter? Cheaper to build maybe?? I know in the mid 1990's, the German army began replacing all the G3 steel lowers with the plastic ones, then about a year later, replaced the upgraded G3's with the G36.
Which is more comfortable in your hand; the Navy or the SEF?
Navy. I do like the MP5 grip with finger grooves too.
I take it you have a real HK stock on your 911?
Yup, IC datecoded
If so, does it have a real rubber butt pad? The craptastic JLD stock slides around like crazy and seems quite unsafe to me.
No, as far as I know all G3's and 91's came with the hard plastic buttpad, mine included. An HK21 thick rubber pad will swap in with no mods though.
Is that an HK91 stock or G3 stock that you have?
The stock I bought for the 911 is off an HK91, I do have a spare HK G3 stock from a parts kit and it is identical to the HK91 stock. The PTR came with an FMP G3 stock, which I replaced with the HK G3 collapsible unit.
Thanks again for your help. :)
You're welcome.

DrjonesUSA
11-04-2006, 7:02 PM
So if I wanted to get a PTR and wanted to upgrade the stock to a nicer HK unit (I presume the polymer that HK uses is much nicer than the JLD junk, right?) with a real rubber butt pad, what do I have to buy, exactly? Do I have to buy both an HK91 or G3 stock AND an HK21 butt pad?

On the G3 stock pictured here, that is not a rubber pad, it is hard plastic?

http://www.top-notchparts.com/interest.htm


Again, many thanks for your help.

rorschach
11-04-2006, 8:27 PM
So if I wanted to get a PTR and wanted to upgrade the stock to a nicer HK unit (I presume the polymer that HK uses is much nicer than the JLD junk, right?) with a real rubber butt pad, what do I have to buy, exactly? Do I have to buy both an HK91 or G3 stock AND an HK21 butt pad?

On the G3 stock pictured here, that is not a rubber pad, it is hard plastic?

I would just pop the old buttpad off and snap an HK21 rubber pad in its place. Aside from a slight color(bluish) and texture difference(more pebbly), the FMP stocks that come with the JLD's are pretty close to the HK originals. If you are set on a factory HK stock, check the for sale boards (hkpro, sturmgewehr.com, falfiles, hk91.com) you can get a center section (the actual plastic stock), even a complete stock assembly with endcap, recoil spring and buffer for a reasonable price. I got the complete datecoded HK stock for 60 bucks off a seller on hkpro.

The rubber pads could be found here-10th item from top: http://www.hkspecialist.net/stocks.htm Check the boards, you can find them a bit cheaper.

The Top Notch center section has the hard plastic pad. I dont know if they are genuine HK, FMP, or made here in the USA, but Wade is a good guy to deal with. You would have to swap your endcap,spring and buffer to these stocks.

Let me know if you have any other questions- I just love talkin' HK!!

the_lynch_family
11-10-2006, 2:57 PM
Heres my 762 nato
http://i86.photobucket.com/albums/k82/the_lynch_family/DSCF2862.jpg
http://i86.photobucket.com/albums/k82/the_lynch_family/DSCF2857.jpg
http://i86.photobucket.com/albums/k82/the_lynch_family/DSCF2861.jpg

PLINK
12-02-2006, 5:37 PM
Here is a NDS-3, Romy G build. Thanks JHC!

http://i119.photobucket.com/albums/o133/PLINK223/AKM.jpg

pc_city
12-17-2006, 3:11 PM
Hesse HAR-25 lower, Noveske upper
http://members.aol.com/riveter/Hesse_Noveske.jpg

JHC
12-17-2006, 4:12 PM
Here's one I slapped together this afternoon, Rivit build on Ewbanks receiver, Romy G kit, US slant brake. Still awaiting paint, G2 trigger, and refinished wood or I might get a poly set.

http://i48.photobucket.com/albums/f242/crash76/CIMG4032.jpg

PLINK
12-17-2006, 4:43 PM
Thanks again JHC.

http://i119.photobucket.com/albums/o133/PLINK223/AKM/AKMW.jpg

69Mach1
12-25-2006, 10:17 AM
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY646.jpg

JPglee1
12-25-2006, 10:25 AM
Here's one I slapped together this afternoon, Rivit build on Ewbanks receiver, Romy G kit, US slant brake. Still awaiting paint, G2 trigger, and refinished wood or I might get a poly set.

http://i48.photobucket.com/albums/f242/crash76/CIMG4032.jpg


Is that a 10/30 or a standard mag


J

Diablo
12-25-2006, 10:57 AM
Man, you guys are so good at building these things. I take forever:( Still waiting to get me an AK:(

JHC
12-25-2006, 11:34 AM
Is that a 10/30 or a standard mag


J It's a standard mag, If I end up going fixed mag I might have to convert one though, I got some extra ugly mag bodies just screaming to be used

fguerra
12-28-2006, 6:31 PM
Global Trades SSR85

http://i25.photobucket.com/albums/c70/goldenstatepits/SSR85.jpg

NDS-3's with Romy G kits

http://i25.photobucket.com/albums/c70/goldenstatepits/NDS_3_builds.jpg

Mag_Rat
12-28-2006, 6:48 PM
wow:eek: nice AK's fguerra .I can't wait till the first (pay day!) to get me another NDS3 and kit.

DV8
01-02-2007, 11:09 AM
BTT....

A friends NDS-3/Romy/Saiga rifle

http://i41.photobucket.com/albums/e275/dv830/IMG_2532.jpg

morepoop4u
01-02-2007, 12:53 PM
My new years project. I'm still waiting for a better deal on that svd stock but heres a photochop of what it would look like.

http://img406.imageshack.us/img406/9772/untitled1jc3.jpg

nds9
yugo parts kit
fal hg
rick's muzzle brake
svd stock
copes limited production tabuk 23.6" tabuk barrel.

Nylo
01-02-2007, 1:46 PM
Nice!

http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY646.jpg

tiger222
01-02-2007, 4:09 PM
late to the party, but not underdressed!
many thanks to 6172crew and to Rorshach :)

http://i13.tinypic.com/2wq7bzp.jpg

wilit
01-02-2007, 6:26 PM
http://www.wilit.com/web/MYAK2.jpg

DV8
01-02-2007, 6:45 PM
Keep em coming guys, I need ideas for 2007! :)

anotherted
01-02-2007, 11:25 PM
late to the party, but not underdressed!
many thanks to 6172crew and to Rorshach :)

http://i13.tinypic.com/2wq7bzp.jpg

Wow, that looks really nice. How hard is it to load?

tiger222
01-03-2007, 11:22 AM
AT~

thanks! I really like it too :)
It's a PITA to do, but It's sooo fun to shoot, I don't
mind that much. Just takes time.

Full Clip
01-03-2007, 11:55 AM
I'm a simple man.
Russian
http://img.villagephotos.com/p/2005-3/981624/Russian-Full.jpg
Romanian
http://img.villagephotos.com/p/2005-3/981624/Romy-Leathercopy.JPG
Albanian
http://img.villagephotos.com/p/2005-3/981624/Albaniansm.jpg
Yugo
http://img.villagephotos.com/p/2005-3/981624/YugoSKS198296sm.JPG

jumbopanda
01-03-2007, 3:26 PM
My first AK build:

http://img413.imageshack.us/img413/1493/pictureup7.jpg

Romanian kit with ak-builder.com economy flat. Finished on Christmas! :D

smle-man
01-03-2007, 4:20 PM
DSA 58 tactical carbine. Nice length and handy but with the original stock the recoil really beat up my cheek because the line of sight was too low for the buttstock drop.

http://www.imagestation.com/picture/sraid205/p32cc2fe7f4d94548467c0626163c371e/ef4395cf.jpg

I got rid of that stock and got a replacement through Entreprise that more closely followed the original FN stock. Much better to shoot!

http://www.imagestation.com/picture/sraid221/pa6a32bc6987059df753c38d66348c463/eb4a4000.jpg

JHC
01-03-2007, 4:58 PM
Here's my Romy MD-63 1969 vintage put together on a Ewbanks receiver.

Built it as straight pull bolt-action(tapped and plugged gas port, chopped piston)
so I get the folding stock, detatchable mag, and PG.


I used the hybrid method of fastening Udrive/rivit/screws/welds
http://i48.photobucket.com/albums/f242/crash76/CIMG4051.jpg
http://i48.photobucket.com/albums/f242/crash76/CIMG4049.jpg
http://i48.photobucket.com/albums/f242/crash76/CIMG4048.jpg

Nylo
01-03-2007, 6:52 PM
Nice, nice nice!

Here's my Romy MD-63 1969 vintage put together on a Ewbanks receiver.

Built it as straight pull bolt-action(tapped and plugged gas port, chopped piston)
so I get the folding stock, detatchable mag, and PG.


I used the hybrid method of fastening Udrive/rivit/screws/welds
http://i48.photobucket.com/albums/f242/crash76/CIMG4051.jpg
http://i48.photobucket.com/albums/f242/crash76/CIMG4049.jpg
http://i48.photobucket.com/albums/f242/crash76/CIMG4048.jpg

Archenemy550
01-03-2007, 7:05 PM
that thing is really really nice!

JHC
01-03-2007, 7:49 PM
Thanks. With the way it's set up you fire, pull the charging handle back to eject the case and load a new one, then repeat, works best with a sling.

Solidsnake87
01-03-2007, 8:10 PM
Dude, does that thing meet the legal length requirement???

JHC
01-03-2007, 8:16 PM
Yes, it's a little over 27 inches when folded

rocknut
01-03-2007, 8:41 PM
My understanding is that the ca. legal length minimum is 30" semi auto or not. If I'm right, you are going to want to delete your post. I hope I'm wrong.

blkA4alb
01-03-2007, 8:44 PM
My understanding is that the ca. legal length minimum is 30" semi auto or not. If I'm right, you are going to want to delete your post. I hope I'm wrong.
And you are wrong, thankfully :) .

(3) A semiautomatic, centerfire rifle that has an overall length of less than 30 inches.

rocknut
01-03-2007, 9:00 PM
Thank you for the correction. I just looked it up myself. I'd hate to see anyone on here get in trouble.

Very nice rifle by the way. I have a polish underfolder kit that I have been trying to decide which direction to take myself.

Charliegone
01-03-2007, 9:26 PM
Yes, it's a little over 27 inches when folded


Dude...I envy you.:D

Full Clip
01-03-2007, 10:22 PM
Nice SVT. Here's mine:
http://img.villagephotos.com/p/2005-3/981624/finished-full.jpg

PLINK
01-04-2007, 11:57 PM
I did not like my poly furniture set so I change it out for wood. Also added a AK74 style brake.
Before:

http://i119.photobucket.com/albums/o133/PLINK223/AKM.jpg

After:

http://i119.photobucket.com/albums/o133/PLINK223/AKM/AKMW2.jpg

xrMike
01-05-2007, 10:00 AM
I did not like my poly furniture set so I change it out for wood.It still looks good, but you lost a couple of "Satan-points" in the conversion. (I like the black better. :D )

NextTimeAround
01-05-2007, 10:05 AM
Always bet on black. Much more "evil" looking.

slickjoesd
01-06-2007, 11:24 AM
http://i30.photobucket.com/albums/c346/slickjoesd/Guns/akuf.gif
Pinned Mag 30" legal length.
Trying to find some to trade for GLOCK, KAHR, SIG, HK + $$ where needed

JHC
01-06-2007, 11:58 AM
Nice. What did you use for your muzzle device?

JHC
01-06-2007, 2:04 PM
This is a reincarnation of a rifle I've posted before, I got bored while babysitting the kids today so I made up a 10/30 mag from a replacement body I had in the shop and made this one a fixed mag. Not sure whether I like the front grip or not yet.
http://i48.photobucket.com/albums/f242/crash76/0106071347.jpg
http://i48.photobucket.com/albums/f242/crash76/0106071348.jpg

rla_2000
01-11-2007, 1:50 PM
SWEET! Nice work with the wood!

rhunter
01-11-2007, 8:32 PM
http://www.gunco.net/gallery/data/683/medium/86_non_thumbhole_ak_chopped_uploadable.jpg

Ugly but workable.

morepoop4u
01-11-2007, 10:54 PM
just get the promag clone. it's half the price and works just as well.

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=418327

rorschach
01-11-2007, 11:27 PM
The promag bipod is junk.

Sammy invest in an all steel bipod instead of one with plastic feet. Youll be happy you did.

I got both of mine from sellers on hkpro for about 140 each. Gordon Miller (hkspecialist.net) sells new ones, but they are expen$ive.

drclark
01-11-2007, 11:37 PM
Just finished now that I've got the MM grip.

http://www.maj.com/gallery/drclark1/romyG/img_1006_resize.jpg

drc

morepoop4u
01-12-2007, 12:28 AM
The promag bipod is junk.

Sammy invest in an all steel bipod instead of one with plastic feet. Youll be happy you did.

I got both of mine from sellers on hkpro for about 140 each. Gordon Miller (hkspecialist.net) sells new ones, but they are expen$ive.

Promag is all steel I know because I bought one.

http://img161.imageshack.us/img161/3214/43mv.jpg

http://img56.imageshack.us/img56/1829/34sy.jpg

http://img77.imageshack.us/img77/7431/24xi2.jpg

http://img157.imageshack.us/img157/7708/10tg2.jpg

morepoop4u
01-12-2007, 12:43 AM
It fits fine on my wide handguard from top notch.:D :p
http://img444.imageshack.us/img444/769/podqr4.jpg

rorschach
01-12-2007, 1:04 AM
I had a Promag too. Compared to the HK unit, well....there is no comparison.

Just my opinion.

Q
01-12-2007, 5:30 AM
Thanks guys. Actually I'm looking for one that fits just forward of the receiver.
But the one that fits close to the front site is a runner up.
like this?
http://i108.photobucket.com/albums/n32/qbertquartz2/bild204.jpg

rorschach
01-12-2007, 10:28 AM
With the trunnion mount bipod, you can only run the slim grip.

morepoop4u
01-12-2007, 1:47 PM
I had a Promag too. Compared to the HK unit, well....there is no comparison.

Just my opinion.

I know but I like refinishing stuff to make them better haha. A little sandblasting and moly resin will make them look prettier. I replaced the springs and filed the locking lugs to engage better as well. So why are your new hk collection pics not doing in this thread:D

Charliegone
01-12-2007, 3:17 PM
Have any of you guys tried to make a magazine that can be load trough the back of the mag...sort of like what atlantic has on their "CA legal ak's?" I'm thinking it might work.

SpeedTribe
01-12-2007, 7:33 PM
Have any of you guys tried to make a magazine that can be load trough the back of the mag...sort of like what atlantic has on their "CA legal ak's?" I'm thinking it might work.

Hold that thought...they may be in the works:)

Socal858
01-12-2007, 7:42 PM
Hold that thought...they may be in the works:)


that would make me very very happy

and very very upset in the wallet department when i buy a rifle that uses such a system:(

rssslvr
01-12-2007, 7:55 PM
How would you make it not take more than 10 rounds?If you are able to depress the follower and spring far enough to be able to insert 10 rounds in the back there is still going to be a portion of the mag that is up in the gun that is more than enough for a round or 2 to fit.So if you put 10 in the back more than likely you could still load one or 2 more through the ejection port.This is a question that Atlantic never answered.Does anyone have one of the Atlantic CA legal AKs?See if you can load any extra rounds through the ejection port after the 10 in the back.

rorschach
01-13-2007, 1:26 AM
I was actually thinking about this for HK rifles, I tried something with an aluminum mag, but it was way too flimsy. I'm trying to acquire some steel tubes to play with now, hopefully they'll be a bit sturdier than the aluminum mags.

To answer the 10 round question, the mag would be blocked to hold 10 rounds total, so realistically, you could prolly load 8 or 9 from the hole, and maybe the 10th through the ejection port.

rorschach
01-13-2007, 1:35 AM
So why are your new hk collection pics not doing in this thread:D

Here ya go!
http://i75.photobucket.com/albums/i309/tsol_roolz/HKfamily02.jpg
Top to bottom: HK911, HK SR9 project, PTR91KA4, Vector V93 (I know, it has no business in the 7.62 thread) USP45, HK4. At right are 2 new PTR receivers. All rifles 10 round mag and rorschach lock-equipped.

Crazed_SS
01-13-2007, 1:42 AM
http://members.cox.net/qsmumin/guns/sks_m1a.jpg

rorschach
01-13-2007, 2:11 AM
Does this count as a 7.62?? It's .30 cal, self loading, and PRK legal
http://i75.photobucket.com/albums/i309/tsol_roolz/Garand02.jpg
Mid-1943 Winchester M1 Garand. I like to think maybe it fought it's way ashore on Tarawa or Iwo, or maybe tore across Europe from Normandie to the Bulge, or maybe even Inchon or the Chosin Reservior. I'll never know.

rssslvr
01-13-2007, 11:45 AM
To answer the 10 round question, the mag would be blocked to hold 10 rounds total, so realistically, you could prolly load 8 or 9 from the hole, and maybe the 10th through the ejection port.

Yep thats the conclusion I came to as well.

alpine18
01-15-2007, 10:33 PM
(moved to .223 picture thread)

rorschach
01-15-2007, 11:09 PM
I was going for a simple, standard-issue type build, but it has started to get out of hand....

Colt upper receiver (C + keyhole)
Colt M4A1 barrel (C MP, 5.56 NATO 1/7) w/pinned SDI extended FH
Colt stock/buffer tube, w/H2 buffer and CS spring
Colt bolt/carrier
Vulcan lower w/pinned BM 10-rnd mag
Matech BUIS
Trijicon TA01NSN w/ARMS #19 acog mount
M4 front sling swivel usgi
KAC M4 RAS
Watson extended takedown pin


May you be banished forever to the .223 thread.

BTW nice rifle.

DV8
01-16-2007, 6:48 AM
Thats something you dont see everyday, a colt married to a vulcan. Time to post it in the right thread though...

alpine18
01-16-2007, 8:44 AM
Yeah, oops... wrong thread.

Cpl_Peters
01-16-2007, 2:10 PM
Does this count as a 7.62?? It's .30 cal, self loading, and PRK legal Mid-1943 Winchester M1 Garand. I like to think maybe it fought it's way ashore on Tarawa or Iwo, or maybe tore across Europe from Normandie to the Bulge, or maybe even Inchon or the Chosin Reservior. I'll never know.

yes
:D

thmpr
01-22-2007, 6:21 PM
http://i122.photobucket.com/albums/o251/thmpr464/CIMG1875.jpg



Sub MOA rifle: @100 yards
http://i122.photobucket.com/albums/o251/thmpr464/CIMG1868.jpg

My new toy! :D

fguerra
01-23-2007, 7:52 PM
My PTR-91 with the collapsible stock
http://i25.photobucket.com/albums/c70/goldenstatepits/PTR91.jpg

http://i25.photobucket.com/albums/c70/goldenstatepits/PTR91_2.jpg

ghost
01-23-2007, 9:34 PM
does that ptr-91 have a pinned mag to be cali legal?

fguerra
01-23-2007, 9:40 PM
does that ptr-91 have a pinned mag to be cali legal?

But of course!:D

ghost
01-23-2007, 9:44 PM
so how do you load it?i might be picking one up soon myself.did you get that one from atlantic firearms?

fguerra
01-23-2007, 10:07 PM
so how do you load it?i might be picking one up soon myself.did you get that one from atlantic firearms?

You load it through the ejection port. It's not too much of a pain. I bought my PTR from Sportsman Safari on Gun Broker. http://www.gunsonthenet.com/Auction/ViewItem.asp?Item=64645325 But I paid about $400 less. You can always email sellers on Gun Broker or Guns America to see if they will ship to CA. A lot won't but some will, you just have to put in some work. Good luck.

69Mach1
01-26-2007, 8:27 AM
Numbers matching Romanian SAR-1
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY684.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY685.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY686.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY687.jpg

Chaingun
01-26-2007, 9:07 AM
Numbers matching Romanian SAR-1
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY684.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY685.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY686.jpg
http://i82.photobucket.com/albums/j258/FIVESIXTN/hkSONY687.jpg

You're a candidate for some new "detachable mag with a tool" method, like the AR.

Okami
01-26-2007, 11:00 AM
I dig that mag setup! Pretty damn creative!:D

~Okami

69Mach1
01-26-2007, 2:14 PM
I dig that mag setup! Pretty damn creative!:D

~Okami

Thanks. It's easier than you think to load.

Richard
01-26-2007, 2:20 PM
Good going.....that is totally cool:cool:

You made it look easier than I thought. I may have to go that route with one of my bulids.

thmpr
01-26-2007, 3:18 PM
Thats f******* Nice!!!!!May need to make one of my builds that way...:D