PDA

View Full Version : FS: DPMS SASS Complete Upper! ***SOLD***


CP3
07-15-2010, 10:57 PM
OK, I just convinced myself I need to part with this thing due to my upcoming move and the lack of any suitable rifle range to stretch her out.

Basically, this thing is new, except I took all the grunt work out of it by conditioning the barrel per DPMS recommendations as taken out of the owners manual:

"To achieve the best results for accuracy you should clean the chamber and bore after every round for the first 25 rounds and then every 10 rounds up to 100 rounds. It usually takes about 200 rounds per barrel for optimum accuracy."

It is now fully capable of driving tacks. And yes, I cleaned the bore and chamber after every round. I am asking $1400. I will entertain reasonable offers -emphasis on reasonable.

http://i78.photobucket.com/albums/j111/cpage5/IMG_0410.jpg

Description
LRT-SASS Upper Barrel Assembly

Barrel:
•18" Length w/Panther flash hider
•416 Stainless Steel
•6 grooves, right-hand 1x10 twist, button rifled

Chamber:
•7.62 NATO

Bolt & Carrier:
•8620 steel bolt carrier, heat treated and plated per Mil Spec
•Phosphated steel bolt, heat treated and plated per Mil Spec

Upper Receiver:
•A3 style flattop
•Thick walled, extruded from 6066-T6 aluminum
•Hard coat anodized per Mil Spec and Teflon coated black
•Dust cover
•Shell deflector and forward assist machined as one unit
•Right hand ejection

CP3
07-16-2010, 7:49 PM
bump

CP3
07-19-2010, 4:27 PM
bump

CP3
07-21-2010, 5:33 PM
ttt

vta
07-21-2010, 5:48 PM
what lowers are compatible with this upper besides DPMS?

CP3
07-21-2010, 9:16 PM
CMMG also makes a DPMS pattern lower. Those are pretty common right now.

CP3
07-23-2010, 10:20 PM
ttt

CP3
07-26-2010, 2:12 PM
bump

CP3
07-29-2010, 3:05 PM
ttt

billprestonesquire
07-30-2010, 12:32 AM
okay then, i'll take it.