PDA

View Full Version : Would you rock a Glock in 7.62 Tok?


rojocorsa
06-17-2010, 7:52 PM
If they made a 7.62x25 Glock, would you rock such a weapon?

jdewolf
06-17-2010, 7:57 PM
Would you rock a Glock if you were Spock?

1911Operator
06-17-2010, 7:59 PM
7.62x25 is more of a piercing round right? how is it with stopping power?

NotEnoughGuns
06-17-2010, 8:00 PM
hell yeah! I would love a 7.62x25 barrel/slide conversion for the 10mm/45acp glocks. I don't think a x25 mag will fit in a small frame glock.

I'm surprised there isn't something out there for this

wilit
06-17-2010, 8:01 PM
Would you rock a Glock if you were Spock?

I do not like OD Glocks. I do not like them on a dock, I do not like them with a clock. I do not like them in a smock, I do not like them chambered in Tok. I do not like OD Glocks, I do not like them Sam I am.

rojocorsa
06-17-2010, 8:01 PM
7.62x25 is more of a piercing round right? how is it with stopping power?

It comes in the 80 to 100 grain category if I am not mistaken. Yes, it is know for being faster and having better penetration than 9x19.

Though I can't give you a straight answer (because I don't specifically know) I would assume that stopping power is in the 9x19 range.

Im going to go look it up...

evidens83
06-17-2010, 8:02 PM
^^ LOL. Yes I would... if it was free

jdewolf
06-17-2010, 8:03 PM
I do not like OD Glocks. I do not like them on a dock, I do not like them with a clock. I do not like them in a smock, I do not like them chambered in Tok. I do not like OD Glocks, I do not like them Sam I am.

More importantly would you rock one, if they weren't shaped like a block?

rojocorsa
06-17-2010, 8:09 PM
Bullet weight/type Velocity Energy
5.5 g (85 gr) JHP[2] 376 m/s (1,230 ft/s) 390 J (290 ft·lbf)
5.8 g (90 gr) FMJ[2] 409 m/s (1,340 ft/s) 488 J (360 ft·lbf)
5.5 g (85 gr) FMJ[3] 502 m/s (1,650 ft/s) 693 J (511 ft·lbf)
5.5 g (85 gr) FMJ[4] 525 m/s (1,720 ft/s) 760 J (560 ft·lbf)
5.5 g (85 gr) JHP[4] 510 m/s (1,700 ft/s) 715 J (527 ft·lbf)

Tests done out of a 12cm bbl.


The only other foreseeable issue with this cartridge is that fact that it's longer than its contemporaries. Having a fat, blocky grip would not help any...

Screw Dr. Seuss. Nothing is worse than coming to America and trying to learn English in school when they put those books in front of you. And my first impression was, "Not even in Mexico do we have green eggs and ham!

QuarterBoreGunner
06-17-2010, 8:12 PM
I do not like OD Glocks. I do not like them on a dock, I do not like them with a clock. I do not like them in a smock, I do not like them chambered in Tok. I do not like OD Glocks, I do not like them Sam I am.

WIN!

SJgunguy24
06-17-2010, 8:12 PM
7.62x25 is more of a piercing round right? how is it with stopping power?

Depends on the armor, but legally no it is not defined as Armor piercing. It is illegal to posses armor piercing ammo for a handgun.

1911Operator
06-17-2010, 8:13 PM
Tests done out of a 12cm bbl.


that converts to 4.72 inches :p

Exiledviking
06-17-2010, 8:25 PM
I would rather have one in 9x23.

TMC
06-17-2010, 8:32 PM
I want a .224 Boz, unfortunately there were only 2-3 guns made. I hear the inventer has a pattent and won't allow it to be made. They say the 5.7 made it obsolete but the Boz will fit an 1911 and the 5.7 won't

I don't know what I'd do with it but it seem cool to me.

Toolbox X
06-17-2010, 8:37 PM
If they could handle subgun (hard primer) 7.62x25 I would be seriously interested.

Oldnoob
06-17-2010, 8:55 PM
Hell yes. Didn't someone made a group on facebook?

http://www.facebook.com/#!/group.php?gid=118094784879887

patriot_man
06-17-2010, 8:56 PM
I want a .224 Boz, unfortunately there were only 2-3 guns made. I hear the inventer has a pattent and won't allow it to be made. They say the 5.7 made it obsolete but the Boz will fit an 1911 and the 5.7 won't

I don't know what I'd do with it but it seem cool to me.

I wouldn't mind having an MP5 chambered for the .224 BOZ.

Squidward
06-18-2010, 7:43 PM
Would need no Glock if I were Spock
No gun gets held I'd use mind meld

A phazer on stun is not much fun
but a photon torpedo fulfills my libido

But if I had to pick one
Of a particular gun
Pure logic unlocked
States undoubtedly Glock

Beem me up Scotty!

John Browning
06-18-2010, 9:06 PM
A Glock in a Tok
Is one I would gladly rock
The ammo is cheap

Cobrafreak
06-18-2010, 9:07 PM
I don't rock glocks, I mock glocks.

WildWildWest
06-18-2010, 9:10 PM
If they made a 7.62x25 Glock, would you rock such a weapon?

Oh yeah y not? :D

asme
06-18-2010, 9:12 PM
Yes, 'cuz 7.62x25 is cheap.

Grumpyoldretiredcop
06-18-2010, 11:45 PM
Nope, that's what they made .357 Sig for.

Quiet
06-19-2010, 12:56 AM
I would like any new modern handgun in 7.62x25mm.

However, here is some rain on the Glock 7.62x25mm parade...

If Glock made a full-sized pistol in 7.62x25mm, it will not have enough points to be legal to import into the USA.

If Glock made a full-sized pistol in 7.62x25mm in the USA in order to bypass the point system for importation, it will not be legal to import to CA due to the approved list. Unless, it was made with a magazine disconnect & a CA DOJ approved chamber load indicator.

rojocorsa
06-19-2010, 11:46 PM
*Will the caliber crap on the import points?

Dreaded Claymore
06-19-2010, 11:47 PM
I do not like OD Glocks. I do not like them on a dock, I do not like them with a clock. I do not like them in a smock, I do not like them chambered in Tok. I do not like OD Glocks, I do not like them Sam I am.

Sir, you just won Calguns. Your trophy will arrive by UPS within 30 days. :jump:

Omil
06-20-2010, 12:08 AM
Sir, you just won Calguns. Your trophy will arrive by UPS within 30 days. :jump:

:rofl2:

SixPointEight
06-20-2010, 12:16 AM
Not a glock, but still cool, and pertinent:

XBR0AT3ZCGI

FS00008
06-20-2010, 7:59 AM
Yes I would. I even started a facebook group for it. http://www.facebook.com/home.php#!/group.php?gid=118094784879887&ref=ts

haha.

FS00008
06-20-2010, 8:00 AM
I would like any new modern handgun in 7.62x25mm.

However, here is some rain on the Glock 7.62x25mm parade...

If Glock made a full-sized pistol in 7.62x25mm, it will not have enough points to be legal to import into the USA.

If Glock made a full-sized pistol in 7.62x25mm in the USA in order to bypass the point system for importation, it will not be legal to import to CA due to the approved list. Unless, it was made with a magazine disconnect & a CA DOJ approved chamber load indicator.

Simple matter to build one on a G20 frame. Then it'd be very easy for us to buy a 7.62x25 upper and modified G20 mags... There's even a fella who's done a home conversion on a G20 already.

resident-shooter
06-20-2010, 9:50 AM
No. Never ever.

El Gato
06-20-2010, 10:02 AM
firstus...
have to see if a round will fit in a 20 mag...
Hmmmm
I have ammo and mags at home....
Hmmmmm

and I love the caliber... don't really care for my two cz pistols in the caliber...but ammo is sooo cheap...like so so cheap... like really so cheap it's a sin or something...

FS00008
06-20-2010, 10:27 AM
Check out the facebook page, the video of the G20 conversion. Apparently they take a little modding, but I assume you could fit them in if they were tilted a bit.

FS00008
06-20-2010, 10:30 AM
http://www.youtube.com/watch?v=MeUxHZAG23k&feature=related

AK4me
06-20-2010, 10:32 AM
no..

FS00008
06-20-2010, 10:54 AM
no..

Your choice. I would. Especially on a G20 frame.

FS00008
06-21-2010, 4:39 PM
Nobody else?

bayboydray408
06-21-2010, 8:57 PM
thats one ar that i would like to own,and im an ak guy

Cali-Shooter
06-21-2010, 9:03 PM
I have a friend who would be interested. I would be too (because it's a Glock).

kel-tec-innovations
06-21-2010, 9:26 PM
I like the idea

Echidin
06-21-2010, 9:51 PM
A Glock chambered in Tok I would rock indeed.

nick
06-21-2010, 9:53 PM
I'd love to have one.

FS00008
06-21-2010, 10:00 PM
Then join the FB group if you have a Facebook! Invite everyone you know who would be interested!

http://www.facebook.com/home.php#!/group.php?gid=118094784879887&ref=ts

http://www.youtube.com/watch?v=MeUxHZAG23k&feature=related

It's most definitely doable.

nick
06-21-2010, 10:58 PM
I don't have a Facebook account, but thanks.

CCWFacts
06-22-2010, 10:38 PM
I would buy one, no hesitation.

Echidin
06-22-2010, 10:56 PM
Then join the FB group if you have a Facebook! Invite everyone you know who would be interested!

http://www.facebook.com/home.php#!/group.php?gid=118094784879887&ref=ts

http://www.youtube.com/watch?v=MeUxHZAG23k&feature=related

It's most definitely doable.

The youtube video was very impressive. I was unaware that anyone had actually converted a Glock to shoot 7.62x25 and for so cheap.

FS00008
06-23-2010, 1:41 PM
Oh yes, it's more than possible :-)