PDA

View Full Version : Magpul, Rock River Arms, LMT, DD Rails, Noveske


Norcal Industries
06-02-2010, 3:00 PM
Here's the updated inventory list.

Rock River Arms
0 NM RRA LPK $120 Shipped
1 RRA chrome BCG $125 shipped
2 RRA LPKs $60 Shipped


Magpul

1 black ctr's, mil-spec $80 shipped $125 shipped
3 fde ctr's, mil-spec $80 shipped.
0 bad levers, $27 shipped.
6 m4 stock assemblies, black, commercial tube, $45 each shipped.
0 fde miad basic kit grips, $34 shipped.
1 black mbus rear sight, $53 shipped. 1 black mbus front sight $40 shipped.
1 black and 0 fde afg's, $35 shipped
0 asap plates, $27 shipped

Magpul PMAG rebuilds 13.0 per mag. 7.50 flat rate shipping

Daniel Defense

Daniel Defense Omega Rail System 9.0 Free Float Mid Length $275 shipped

Also included are 3 ladder rail covers.
The Daniel Defense Omega Rail is a light weight free float rail system designed to use the existing Delta ring without modification. This two piece rail utilizes a Patent Pending System which allows the upper receiver to have a continuous uninterrupted upper rail platform, while allowing for a simple and rapid installation.

Daniel Defense M4 7.0 Free Float Carbine Rail System $240 Shipped
Also included is 3 ladder rail covers.
The Daniel Defense 7.0 Free Float Rail System is the lightest rail handguard available on the market, bar none! It weighs an astonishing 8.5 Ozs. (including the threaded ring, barrel nut and indexing pins) but is as sturdy as similar designs weighing twice as much!

Daniel Defense Omega Rail System 7.0 Free Float Carbine $260 Shipped

Also included are 3 ladder rail covers.
The Daniel Defense Omega Rail is a light weight free float rail system designed to use the existing Delta ring without modification. This two piece rail utilizes a Patent Pending System which allows the upper receiver to have a continuous uninterrupted upper rail platform, while allowing for a simple and rapid installation.


Pre-order for LMT Products all LMT prices include shipping

Stripped upper assembly (no BCG, CH,or HG) will be $445 shipped. Standard flattop upper receiver with 16" chrome lined 1:7" twist 5.56MM barrel

http://img85.imageshack.us/img85/7541/lmtstrippedupper.jpg

Complete uppers $615 shipped

Standard flattop upper receiver with 16" chrome lined 1:7" twist 5.56MM barrel with semi-auto bolt carrier and group. Includes charging handle and M4 double heat shielded handguards.


http://img64.imageshack.us/img64/722/lmtcompleteupper.jpg

Armalite M15A4 Complete SPR (Rifle Length) Upper Receiver $550 Shipped

Featuring a forged flattop upper, 20" chrome lined 1:9 twist heavy barrel with flash suppressor and Picatinny rail gas block. Includes complete bolt assembly and Charging Handle.

http://img257.imageshack.us/img257/8563/armalite.jpg (http://img257.imageshack.us/i/armalite.jpg/)

NOVESKE UPPER 16" RECON w/9" NOVESKE RAIL SWITCH BLOCK $1400 shipped (includes insurance and tracking numbers)

16" Cold Hammer Forged 5.56mm Barrel
--Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining,
(appx. 2 times as thick as an M4 or M16)
--Extended Feed Ramps
--Same weight as M4 barrel, 1 lb, 9 oz, but improved contour for maximum
rigidity, no M203 notch
--MP HP tested with certification
--1 in 7" twist
--Vltor VIS 9" monolithic upper
http://img189.imageshack.us/img189/2144/noveskeswitchback.jpg

drs2714
06-02-2010, 3:04 PM
Stocks!Just order stocks.All the different models of stocks but just stocks.

The Vainguard
06-02-2010, 3:05 PM
If its Magpul, it'll sell. Just grab whatever you want.

I myself, am looking for a FDE UBR and RVG.

injectr
06-02-2010, 3:11 PM
Miad grips, moe grips and AFGs. Even some trigger guards.

ZombieKiller
06-02-2010, 3:12 PM
Slings....are the new ones out yet?

1811
06-02-2010, 3:18 PM
been talking to a magpul distributor, and i need to make a $1000 order to start. what kind of magpul parts are people interested in, other than mags????

I'll TAKE IT!!!!!!!!!!!!!!!!!:43:

OC_Mike
06-02-2010, 3:19 PM
I was in the looking for CTR stocks and kit (OD color). Just bought one.

PMAGS! w/window! no window! 30 rd kits! 10/20! 10/30! Ranger plates! Rdy mags! MAID! Back Up Sights! XTM panels! MAD LEVER!

Give me a big discount! :D

Still looking for a complete MAID OD grip kit.

Norcal Industries
06-02-2010, 3:28 PM
ok, thanks for the input. ill see what i can do this week. can get mil-spec ctr assemblies for $120 shipped, and prs' complete for $215 shipped. afg $33 shipped, vfg $24 shipped, and miad full kit grip for $37 shipped. let me know.

Jason_2111
06-02-2010, 3:32 PM
Doh! I just bought a new stock/sling/BAD lever/ASAP last night.
BUT... I'm still looking for mags mags, and more mags. :)

OC_Mike
06-02-2010, 3:33 PM
ok, thanks for the input. ill see what i can do this week. can get mil-spec ctr assemblies for $120 shipped, and prs' complete for $215 shipped. afg $33 shipped, vfg $24 shipped, and miad full kit grip for $37 shipped. let me know.


I'LL TAKE THE MAID FULL KIT GRIP in OD.

I'm also looking for an OD CTR 0.25in cheek riser...how much shipped?

Thanks!

localguy
06-02-2010, 4:19 PM
Want the RSA!!

Norcal Industries
06-02-2010, 4:28 PM
whats the rsa?

Norcal Industries
06-02-2010, 4:37 PM
sorry, a little slow, and just got an email from magpul about the rail sling attachment. how many you looking for?

shamu415
06-02-2010, 4:39 PM
black ctr mil-spec plz

Norcal Industries
06-02-2010, 4:47 PM
ctr assembly or just the stock?

Veggie
06-02-2010, 5:16 PM
Too bad the RSA isn't out yet.

Norcal Industries
06-02-2010, 5:27 PM
guy at magpul said itll be out by the end of the month.

telcolineman
06-02-2010, 5:57 PM
Rail covers seem to sell very well, I just bought a 308/PRS. Can't go wrong with Magpul stocks

Norcal Industries
06-02-2010, 6:07 PM
ok, thanks. put an order in, well see how it does.

The Vainguard
06-02-2010, 7:14 PM
Norcal, I'm PMing you.

shamu415
06-02-2010, 11:24 PM
People usually just want the stock, CTR, ACS, and UBRs are in good demand

Norcal Industries
06-03-2010, 12:02 AM
it is definitely seeming to be so. i cant wait to see what the direct prices from magpul will be.

AIMSMALL
06-03-2010, 12:08 AM
PM'd on CTR stock in OD

ArkinDomino
06-03-2010, 12:10 AM
CTRs FTW. The elusive iphone cases...

Norcal Industries
06-03-2010, 12:12 AM
ive seen ftw, but what does it mean?

ArkinDomino
06-03-2010, 12:16 AM
FTW = for the win

Norcal Industries
06-03-2010, 12:21 AM
ok, thanks. ctr's i can get right now for 75 shipped, just stock, or 120 with mil spec assembly.

telcolineman
06-03-2010, 12:24 AM
ok, thanks. ctr's i can get right now for 75 shipped, just stock, or 120 with mil spec assembly.

Excellent price

Norcal Industries
06-03-2010, 12:26 AM
im trying to keep it down. thats the price buying everything through deltons dealer program. if i can get on with magpul's distributor, expect even less.

telcolineman
06-03-2010, 12:27 AM
WOW, I paid $50 for my MOE. And $100 for my PRS, JK It was a complete Emod stock and $100

Norcal Industries
06-03-2010, 12:33 AM
moe would be about 55 shipped. prs is 190 stock only shipped, and 215 with tube assembly. emod would be about 110 shipped, stock only.

ArkinDomino
06-03-2010, 12:35 AM
how much for a ubr?

telcolineman
06-03-2010, 12:35 AM
Smoking deals here, Shipping was extra on my MOE. And come to think of it it was slightly used, What kind of price can you get for the ASAP?

Norcal Industries
06-03-2010, 12:37 AM
ubr is where im getting killed. my price is 255 shipped. ive seen em going on ebay for 225 shipped.

Norcal Industries
06-03-2010, 12:40 AM
im not making much, really. im hoping magpul's distributor will give me an even better price, and then i can go even lower. well see. the two distributors magpul sent me to were kinda sketchy. right now im just getting dealers price from deltons website. i can also get yankee hill machine, and rock river is supposedly setting me up with an online account.

Norcal Industries
06-03-2010, 12:42 AM
im sorry, not used to the terminology. whats a asap?

telcolineman
06-03-2010, 12:45 AM
Asap is the single point sling mount that replaces the buffer tube retainer plate, I didn't know what it was till I saw one at the range and asked

Norcal Industries
06-03-2010, 12:45 AM
sorry, found out, but can only get the ms2 for now.

caoboy
06-03-2010, 12:45 AM
iTouch case!

Norcal Industries
06-03-2010, 12:47 AM
im hoping to find out more once i talk to the distributor. i googled it and that does look like a pretty nice piece.

Norcal Industries
06-03-2010, 12:48 AM
ill find out about the case too. delton doesnt list all the magpul products, and thats my main goto for now.

telcolineman
06-03-2010, 12:48 AM
Isn't the MS2 a sling not a mount??

Norcal Industries
06-03-2010, 12:50 AM
ya, im an idiot. i googled magpul asap, and i only glanced at what it said, so i started searching for slings instead of mounts.

Victory
06-03-2010, 12:51 AM
Hey Norcal, can you get any info on the 10 round PMags that Magpul is working on?

They will sell like hotcakes here on Calguns once they are released, I'm sure.

-Vic

telcolineman
06-03-2010, 12:52 AM
No problem and I agree with Victory on the Pmags

Norcal Industries
06-03-2010, 12:54 AM
ill find out, but right now im just trying to get regular pmags and some black rivets for myself. been paying $20 locally, but rivets are cheap and so are the mags at dealer price.

telcolineman
06-03-2010, 12:58 AM
Black rivets, Plain old rivets and black nail polish or model paint. I wish magpul would design a mag for the AR-10, I would jump on them. Stock mags at $45-$70 a piece is highway robbery

Norcal Industries
06-03-2010, 12:59 AM
says they make 308 mags on their website. they wont work?

telcolineman
06-03-2010, 1:05 AM
No, Those are for the DPMS/panther style rifles. Armalite uses a proprietary design based on a modified M14 mag

Norcal Industries
06-03-2010, 1:06 AM
ouch, ok.

telcolineman
06-03-2010, 1:13 AM
Yep it sucks, Wow I must be bored. I am just bending your ear LOL. On a serious note magpul makes some of the best products I have ever used, And I will direct my buddies to you for all the Magpul needs in the future. Where in Sac are you?

Norcal Industries
06-03-2010, 1:21 AM
near watt and el camino, behind country club mall. ya, if i get a dealers contract with the distributor, ill be doing a lot of business just for myself. ive had a few ar's over the last decade and a half, but i just started getting into em again about 6 months ago. got a business license to buy and reload ammo, but the prices on brass went through the roof, so i started using it to get myself and friends parts at discount prices. so i started selling stuff here in my off time. its like the lower parts kits im selling. i get 10 at a time, for $45 a piece. with shipping, its about $48. im doing them for 54 each. bubble envelope is $1.00 and shipping is usually around $3 for priority. ive sold around 20 in the last 2 months. not going to be quitting my job anytime soon. thats why i say, if you want something, ask, and if i have access to it, ill get you a reasonable price. delton likes to charge a lot for shipping, so im learning to try and do multiple orders at one time. and with magpul wanting at least 1000 per order, it should be cheaper, and shipping should be a lot more reasonable.

Norcal Industries
06-03-2010, 1:21 AM
and no, i have no concept of where to start and end paragraphs.

Norcal Industries
06-03-2010, 1:22 AM
and ya, i used to only have thermolds till i saw that youtube video with the guy driving the chevy over em. i never like metal mags. they dont match the gun, they rattle, and they dent too easily, in my opinion.

telcolineman
06-03-2010, 1:33 AM
I'm not much on grammer or paragraph's either, I have several aluminum mags. I prefer the magpul units, I have never tried the thermolds. Magpul seems to be one of the more forward thinking companies in the market,
I like that. And their customer service is top notch, I lost one of the little pins for the ASAP. It locates it to the tube, At any rate I emailed them. Within 10 minutes they emailed me back, Long story short they sent me both pins which are 1 size for milspec and 1 for comm. Free of charge and 2nd day air, You can not ask for more from a company in my book. Holy Crap, it's 2:30 and I haven't been to sleep yet, Good talking to you and take care
JIM

Norcal Industries
06-03-2010, 1:35 AM
you too. i like magpul too. although i like the caa grip the best. im tim, by the way. and sleep well.

telcolineman
06-03-2010, 1:38 AM
Good to meet you Tim, I like the CAA grip as well and will probably put one on my 10. I'm outta here

Norcal Industries
06-03-2010, 7:08 PM
im gonna order some mil spec ctr assemblies tomorrow night. anybody else want one, pm me. $120 shipped.

EWILKE
06-03-2010, 7:31 PM
I will need in FDE a UBR stock MBUS and the multi colored foregrip panels.

Norcal Industries
06-03-2010, 7:35 PM
dang, my price so far on ubr's sucks. and i cant get the panels till starting next week. unfortunately, ebay has ubrs for $30 cheaper than i can get them for, plus shipping.

Wir3d
06-03-2010, 9:41 PM
Im interested in MIAD full kit, AFG , MBUS rear all in FDEarth and a bad lever.

Caiden07
06-03-2010, 10:32 PM
How about rails for MOE handguards?

only10x
06-05-2010, 10:32 PM
bump for a good opportunity

LasVegasTaxMan
06-05-2010, 10:45 PM
Pm sent.

RAAK_FJ
06-06-2010, 7:09 AM
Slings....are the new ones out yet?

New ones??? please elaborate. thanks

kagami
06-06-2010, 8:33 AM
Magpul has the MS3 out.

Norcal Industries
06-07-2010, 8:11 PM
talked to the magpul guy today. see first post.

littlerocket
06-07-2010, 8:32 PM
When are those mid length handguards coming out? Bummer on the CTR kit, just bought one for 129.

In_this_city
06-07-2010, 8:53 PM
Ill take a magpul AR lower receiver. haha :)

OneApart
06-07-2010, 9:53 PM
BAD Levers
ASAP Plates
Stocks (MIL-SPEC)
MOE Handguards
Ranger Plates

thrillhouse700
06-07-2010, 11:35 PM
magpul rear MBUS.

MrPlink
06-08-2010, 12:42 AM
try to get that suitcase bulpup thing for Glock 18s ;)

Norcal Industries
06-08-2010, 12:59 AM
god, id love that. did they ever produce it? i know theyd never sell it here in california, but have they sold it anywhere?

kagami
06-08-2010, 10:22 AM
still in prototype phase my friend ;)

ignited alchemy
06-10-2010, 10:36 AM
Window 10/30's
rear mbus

Norcal Industries
06-10-2010, 8:12 PM
rear mbus, would be $47 shipped.

telcolineman
06-10-2010, 8:43 PM
dang, my price so far on ubr's sucks. and i cant get the panels till starting next week. unfortunately, ebay has ubrs for $30 cheaper than i can get them for, plus shipping.

Ebay seller probably hijacked a truck load LOL

Norcal Industries
06-10-2010, 9:08 PM
wish i knew where that truck was............

Veggie
06-10-2010, 9:24 PM
dang, my price so far on ubr's sucks. and i cant get the panels till starting next week. unfortunately, ebay has ubrs for $30 cheaper than i can get them for, plus shipping.

They are probably knock offs. Magpul has minimum pricing authorized dealers are allowed to charge for their products.

Norcal Industries
06-10-2010, 9:35 PM
china has been making some pretty accurate stuff. i got a a.r.m.s. carbine free-float off ebay for $25 to see. even had the patent info painted on. its almost prefect compared to the real one i have and 1/10 the price. from 5 feet away, you cant tell the difference. if theyre knock offs, theyre paying 50 for them and flipping em for 225. not too bad.

ArkinDomino
06-10-2010, 9:43 PM
They are probably knock offs. Magpul has minimum pricing authorized dealers are allowed to charge for their products.

I used to think that too till I gave it a shot and landed a sweet deal on the UBR. Real deal buddy...

The Vainguard
06-10-2010, 9:45 PM
Magpul has a way to tell if its real or not on the website. Something about the spacing of the lettering is off (Trademarks), the color is slightly off, and the material is not as up to par with the real thing.

Minimum pricing is true, but since its ebay, they can charge whatever they want without getting in trouble. Even Calsportinggoods has a "Click for better price" and they email you their real price to you because its below the minimum price they can charge.

There's always ways to get around the 'Minimum price' rule.

ArkinDomino
06-10-2010, 9:51 PM
By the way, the UBR I picked up from Ebay passes this (http://store.magpul.com/downloads/counterfit_ubr.pdf)

Norcal Industries
06-10-2010, 10:03 PM
the issue for me isnt advertised price, its actual cost. according to magpul, they only use 2 distributors. and they both have the same price. and its above $200. although if you want a green one, they list it as 199 right now, and their answer was that green ones dont sell, so they had to knock down the price drastically to move them.

kagami
06-10-2010, 10:09 PM
this should tell you something about trends in AR furniture color lol.

also, theres 2 kinds of green, might want to make the distinction in future references to products, foliage green and OD green ;)

The Vainguard
06-10-2010, 10:12 PM
He's referring to both greens.

http://dsgarms.com/ProductInfo/MAG330-FG.aspx

http://dsgarms.com/ProductInfo/MAG330-OD.aspx

Norcal Industries
06-10-2010, 10:15 PM
right, makes me wanna buy a green one and then paint it.

Norcal Industries
06-16-2010, 3:23 PM
more ctr's showing up tomorrow.

Norcal Industries
06-19-2010, 1:09 PM
bump for sat

C_1
06-19-2010, 1:33 PM
Any word on the mid length handguards?

Norcal Industries
06-19-2010, 3:43 PM
i havent heard anything.

Norcal Industries
06-20-2010, 7:41 PM
first post is updated with quantities.

The Vainguard
06-20-2010, 7:48 PM
I guess "Green" = OD, right? Since you labeled the MBUS in Foliage.

Norcal Industries
06-20-2010, 7:49 PM
the ctr is od, yes. correcting now.

LasVegasTaxMan
06-20-2010, 8:00 PM
Pm sent.

encbrandon
06-21-2010, 12:05 AM
i might need UBR...

xeroglock
06-21-2010, 6:13 AM
can you get OD green mbus set?

Norcal Industries
06-21-2010, 11:50 AM
monday bump, and yes i can get the od mbus set.

Semituff
06-21-2010, 12:35 PM
Looking for a CTR stock (mil spec) in Dark Earth.
You got one?

Semituff
06-21-2010, 12:36 PM
Sorry... Full assembly, Tube spring, etc.

delfino
06-21-2010, 12:37 PM
retracted.

thrillhouse700
06-21-2010, 1:11 PM
Got all my stuff from you today. Super fast and great communication. If anyone is weary about buying from norcal hes top notch. Buy with confidence.

Norcal Industries
06-21-2010, 1:46 PM
thank you very much thrillhouse. i hope you enjoy it.

E_Shaw90
06-21-2010, 7:23 PM
Bump for some great magpul deals...

jvpark
06-21-2010, 7:30 PM
pm me the best paypal'd price for the bad lever and rvg (non-moe)

Norcal Industries
06-22-2010, 3:43 PM
all pms replied too. plenty of stuff left for everyone.

gyee226
06-23-2010, 9:33 AM
Thanks NorCal for hooking me up w/ the FDE CTR + assembly. He's good to go and makes good on his promises. I'll be ping him for parts in the near future.

Norcal Industries
06-23-2010, 4:54 PM
Btt

Norcal Industries
06-27-2010, 4:01 PM
btt

Norcal Industries
06-28-2010, 6:37 PM
btt

JJKESSEL
06-29-2010, 3:03 PM
Norcal Industries, do you have a store here in Sac?

Jeff

Norcal Industries
06-29-2010, 4:44 PM
Jeff,

Sorry bud we do not have a store front at this time. its part of the plan but were just not there yet. If you ever wanna see any product you can pm to see whatever you want.

Norcal Industries
06-30-2010, 4:50 PM
btt

E_Shaw90
06-30-2010, 6:37 PM
Free Bump for a solid Cal Gunner!

john2139
07-01-2010, 3:42 PM
looking for

FDE MBUS set (FRONT and REAR)
ASAP plate
FDE M4 complete stock
LPK as well

OC_Mike
07-01-2010, 4:07 PM
Request:

3x 10/20 OD Pmags w/ranger plates

Let me know Tim! Thanks!

Norcal Industries
07-06-2010, 10:34 PM
updated inventory on first page.

The Vainguard
07-06-2010, 10:41 PM
Please PM me when FDE RVGs finally come in!!

Norcal Industries
07-06-2010, 10:50 PM
itll most likely be years, so i wouldnt hold my breath. the rsa hasnt even come out yet, and that was supposed to be out months ago.

The Vainguard
07-06-2010, 10:51 PM
The PTS RVG in FDE is already out... I don't know why the real one isn't :(

He_Shoot_Me
07-07-2010, 12:36 PM
Score, right here in Sactown.....talk to you soon.

-Pat

Norcal Industries
07-07-2010, 4:30 PM
ill be here.

Norcal Industries
07-09-2010, 7:01 PM
btt

OC_Mike
07-22-2010, 8:05 AM
Tim I need...

1x Bad Lever
3x OD 20rd Pmag w/r plates

Got'em?

PM inbound.

DeltaBronco
07-22-2010, 10:30 AM
ok, thanks. ctr's i can get right now for 75 shipped, just stock, or 120 with mil spec assembly.

I would like CTR in Foliage green commercial spec stock only. Pm Sent

Norcal Industries
07-28-2010, 4:14 PM
btt

Juice5610
07-28-2010, 5:25 PM
2 black ctr's, $80 shipped

If milspec I'll take 1

SIGP226
07-28-2010, 6:02 PM
I'll take 1 fde miad basic kit

pm inbound

Norcal Industries
07-29-2010, 4:11 PM
btt

Norcal Industries
07-31-2010, 4:15 PM
btt

Norcal Industries
08-01-2010, 2:54 PM
btt

Norcal Industries
08-02-2010, 4:03 PM
Btt

Norcal Industries
08-03-2010, 5:48 PM
New shipment in today. check us out

AIMSMALL
08-03-2010, 6:03 PM
Did you get that black CTR stock for a commercial tube we talked about? I have your $$.

Norcal Industries
08-12-2010, 6:28 PM
btt

keson
08-14-2010, 1:28 AM
I"ll take Magpul ASAP for $28 shipped.

Pm inbound.

Norcal Industries
08-16-2010, 5:41 PM
btt

darkknight
08-17-2010, 2:18 AM
great deal

Norcal Industries
08-17-2010, 4:59 PM
btt

Norcal Industries
08-19-2010, 3:46 PM
btt

Norcal Industries
08-21-2010, 6:26 PM
Btt

rare
08-22-2010, 7:28 AM
Holy $&&?! Amazing fast shipping and great prices. Thanks Tim.

sleepydragon636
08-22-2010, 8:07 AM
i'll take an dpms upper. pm sent

speed28
08-22-2010, 9:12 PM
pm sent. How is the 10/30 pmag blocked? thanks

Norcal Industries
08-23-2010, 5:02 PM
btt

Norcal Industries
08-24-2010, 4:13 PM
bttt

Norcal Industries
08-25-2010, 5:12 PM
btt

Norcal Industries
08-27-2010, 5:06 PM
btt

Norcal Industries
08-31-2010, 5:57 PM
btt

Norcal Industries
09-03-2010, 6:29 PM
btt

cheenky
09-07-2010, 9:31 PM
are the rra lpk's in stock?

Norcal Industries
09-08-2010, 1:00 PM
btt

Norcal Industries
09-11-2010, 2:48 PM
btt

Arias
09-11-2010, 3:14 PM
PM sent about Magpul rear sight

darkjedi351
09-16-2010, 5:33 PM
needing a asap plate and a LPK. standing by for you to be resupplied.:D

dumpsterdiver
09-26-2010, 2:15 AM
how much for a magpul prs assembly shipped to 95864?

BAGunner
09-30-2010, 3:51 PM
Pm'd a week ago. Haven't received your reply so far.

Norcal Industries
11-09-2010, 12:04 PM
back from illness. pm for pricing and ordering.

only10x
11-09-2010, 3:48 PM
Welcome back Norcal!

Norcal Industries
11-10-2010, 4:48 PM
thanks. nick went on to other things, so im back. let me know if/when you need anything. tim

Norcal Industries
11-11-2010, 2:37 PM
btt

Norcal Industries
11-13-2010, 3:38 AM
btt

Norcal Industries
11-14-2010, 6:29 AM
nobody wants anything?

Norcal Industries
11-17-2010, 4:16 PM
btt

Norcal Industries
11-23-2010, 5:03 PM
btt, anybody want quotes, send me a pm.

Norcal Industries
12-02-2010, 11:23 PM
btt

Norcal Industries
12-06-2010, 8:02 AM
btt

only10x
12-06-2010, 5:43 PM
Bump for great prices and even better service!
Thanks Tim got the Delton parts today!

Norcal Industries
12-10-2010, 3:39 PM
bump

Norcal Industries
12-16-2010, 7:38 PM
btt

Norcal Industries
12-21-2010, 9:04 PM
bump

brnnbrd007
01-28-2011, 3:57 PM
What is your available stock and price on the ACS in FDE?