PDA

View Full Version : 80% AR15 PAPERWEIGHT LOWER GB RD2 CLOSED.. DONE.. SUCCESSFULL :)


Z ME FLY
05-27-2010, 9:34 PM
Out of RESPECT for me and this group buy DO NOT MENTION PRICES TO CALGUNNERS PMing you about it. If they really wanted to know they can PM me or post here like I asked. ONCE AGAIN DO NOT MENTION PRICES TO ANYONE... thank you, this will allow me to continue to work group buys for calguns if there is no drama.


There seems to be a good amount of interest going around right now concerning 80% AR lower paperweights. I am trying to see if there is enough interest to do a round 2. I'll need at least 30 paperweights to make it work. Last group buy I ran, we had a choice between the unfinished white or the hard black anodized finish. I will go over pricing via PMs only and I will send those out after a couple of days once I get enough interest.

Here is the link to last group buy I am finishing up
http://www.calguns.net/calgunforum/showthread.php?t=299413

You must do your research about these, they are not very hard to complete but do take some time and a drill press. Please post if you are interested, then I will send out PMs to confirm your interest with the pricing also. Once you commit from there, it is like saying "I'll take it" here on Calguns. It's your word and if you back out after I give out pricing and you committed, you will get negative itrader feedback, that's just how I roll.

I will probably post up some pictures tomorrow of the paper weights to give you an idea of how they look. No timeline yet but once I get enough interest, I can let you know how fast I can get these for you.

Also last thing, I got a lot of pms asking me why I would finish an 80% lower vs. buying one. Well if you think about the cost of a stripped lower plus the bs transfer and dros fees you are looking about $150 in some cases. You can finish an 80% paperweight for about the same price if not cheaper depending on your tooling and it will be off the books. Also if you ever wanted an ar pistol lower.... well follow all the rules and our friendly calguns flowchart and you can have one. It's hard for me to personally pay $300-500 for a stripped ar pistol lower.

btw I reserve the right to not include you in this group buy due to your negative itrader feedback or even no itrader feedback. I can also not include you for being a new member just because of the fact you are not established here on calguns. The people who flaked last group were people who fell into this category

http://i298.photobucket.com/albums/mm279/zmefly0130/052810021000.jpg

http://i298.photobucket.com/albums/mm279/zmefly0130/052810020949.jpg

http://i298.photobucket.com/albums/mm279/zmefly0130/052810020934.jpg

http://i298.photobucket.com/albums/mm279/zmefly0130/paperwt.jpg

Here is the list of the names so far, you will get PMs shortly about things. If you have an (n) by your name that means you are a noob which means you probably have a combination of low post count and hardly an itrader feedback. I check everyone's itrader to make sure you are at least legal age. Yes even if it's a paperweight I personally still want to make sure you are legally able to own a firearm.


CONFIRMED!!

TUNIS (2) BLACK PAID
TABOOAR (3) WHITE PAID
Kduly (2) BLACK PAID
LEX (1) BLACK PAID
CALIF MINI (1) BLACK PAID
Stan (1) White PAID
grumpydan (1) WHITE PAID
arfan66 (1) BLACK PAID
PITSTOP911 (2) BLACK PAID
MRPINK (4) WHITE PAID
ANGELDECOYS (1) BLACK PAID
CUAHITL (1) BLACK PAID
ONEAPART (1) BLACK PAYMENT SENT
FOXTROTUNIFORMLIMA (1) WHITE PAID
LICKITYSPLIT (1) BLACK PAID
PATRIOT_MAN (1) BLACK PAYMENT SENT
RINO (1) WHITE PAID
JAR15SP1 (1) BLACK PAID
JACK_BAUER (2) WHITE PAID
SIMPLENAMEZ (1) WHITE PAID
TZL (2) WHITE PAID
OBVIOUSLY A PLANT (2) BLACK PAID
SPAIKMOS (2) BLACK PAID
IRONMAN5669 (1) WHITE PAID
CP562 (1) WHITE PAID
ZER0BOT (1) BLACK PAID
BLOOD OCEAN (1) WHITE PAID
CHARLIE50 (2) BLACK PAYMENT SENT
FOTOAPPARAT (1) WHITE PAID
JEFFU (2) WHITE PAID
JASON_2111 (1) WHITE PAID
HYPNOMAN (1) WHITE PAYMENT SENT
ROCCOBRO (2) BLACK PAID
METALJESUS (2) BLACK PAID
ICREDABLEHEFEY (1) WHITE PAID
GMCEM50 (1) WHITE PAID
Toyz (1) WHITE PAID

25 WHITE, 26 BLACK PAID FOR




ETA WE ARE LOOKING ABOUT 2 WEEKS. IT TAKES ABOUT 2 WEEKS TURNAROUND TIME FOR THE ANODIZED 80%S. I WILL UPDATE WITH A POSTS ONCE THINGS SHIP OUT AND WHO'S HAS SHIPPED OUT. ONCE I GET THE PAPERWTS, I SHIP THEM OUT WITHIN A DAY OR TWO.

simplenamez
05-27-2010, 10:26 PM
Hey Z let me know.

thanks

247Nino
05-27-2010, 10:37 PM
count me in

RogueSniper
05-28-2010, 12:43 AM
Z,
I'm interested. Of course, prices may vary! :D
PM me with info and I'll decide from there.
Thanks.

Z ME FLY
05-28-2010, 1:05 AM
just a friendly reminder since some people i guess don't read my first post... i will pm you with the details next week. i know i said it in the first post since i am looking at it right now. If you haven't dealt with me before, wait for my PM. If you have dealt with me before you can PM me beforehand but nothing 100% until I get enough interest

i log onto calguns after a couple of hours and have a good amount of pms asking about price not a good way to contact me if I we haven't talked before... 2nd reminder, i post here for interest as i will go in order of posts because my pms are way too confusing with the amount that i get already.

thanks and remember, please post here that you are interested then I will go down the list.

416stroker
05-28-2010, 1:24 AM
Im interested depdending on prices.

big ron
05-28-2010, 5:09 AM
interested.

Charlie50
05-28-2010, 5:53 AM
Interested in an anodized unit or two. Please keep me posted... missed last buy. THX

jvpark
05-28-2010, 6:14 AM
interested will make final decision after I know the price.

thanks.

Flying Bones
05-28-2010, 6:53 AM
Interested...especially if someone in the Sac/Northern Nor Cal Area has hookup on machines.

DB2
05-28-2010, 7:17 AM
Interested as well.

Kelvrick
05-28-2010, 7:53 AM
interested

Ajaxx
05-28-2010, 8:53 AM
Interested DOP

Z ME FLY
05-28-2010, 8:58 AM
Interested...especially if someone in the Sac/Northern Nor Cal Area has hookup on machines.

I won't deal with "only if's"

those are normally the people who end up backing out...

Z ME FLY
05-28-2010, 9:58 AM
SERIOUSLY PEOPLE DO NOT SEND ME PMS REGARDING THIS GB...

I WILL CONTACT YOU.. PMING ME UNLESS WE KNOW EACH OTHER WILL AUTOMATICALLY KICK YOU OFF THE LIST...

I maybe a jackarse but if you can't follow directions... I.E. I TOLD YOU IN THE FIRST POST THAT I WILL PM YOU DO NOT PM ME IT SEEMS HARD FOR PEOPLE TO FIGURE THAT OUT

gemini05
05-28-2010, 10:10 AM
i'm interested....but it depends on the price..

Jack_Bauer
05-28-2010, 10:37 AM
I'm interested as well

SixPointEight
05-28-2010, 10:42 AM
I'm in for more info. Please send me a PM when you have it. I've been on the fence about one of these for a while.

Taurus94538
05-28-2010, 11:50 AM
I was in on the last GP, and these paperweights are much much better than the one referenced on CNC Gunsmithing. I've compared them side by side, and these have more holes drilled out, in particular the hard to do pivot pin retension hole and the bolt catch pin hole. Much better finish and more polished. On top of that, it cost less :D

Also, Z is a great guy to deal with.

TabooAR
05-28-2010, 11:53 AM
I am interested - Please PM details when they become available.

Z ME FLY
05-28-2010, 12:12 PM
Pictures from Norm22

:jump:

Thanks Z!

http://i194.photobucket.com/albums/z306/nyuen222/Mobile%20downloads/5af7f714.jpg

arfan66
05-28-2010, 12:38 PM
I'll take an anodized one....

TZL
05-28-2010, 1:03 PM
put me down for an anodized one

pitstop911
05-28-2010, 10:23 PM
I'll take a black anodized finish.
Thanks

Big Al Nasty
05-29-2010, 11:39 AM
I am interested in up to five anodized or not depending on price.

Al

zeropoint
05-29-2010, 11:56 AM
interested...awaiting your PM.

Richie Caketown
05-29-2010, 12:01 PM
im interested depending on price

OneApart
05-29-2010, 2:04 PM
Count me in for @ least 1 Anodized, more if the price is right.... PM me.

Brundelfly
05-29-2010, 2:20 PM
Interested in anodized.

Need price

TY.

wilit
05-29-2010, 2:20 PM
What's the price? May be interested.

ironman5669
05-29-2010, 2:29 PM
interested in at least one maybe two! depending on price

blindluck
05-29-2010, 3:27 PM
interested.

ejor
05-29-2010, 3:55 PM
I'm interested in the price

wilit
05-29-2010, 4:57 PM
Make your own decision whether it's something you can handle, then simply send Z a pm expressing interest and he'll send you pricing.


I maybe a jackarse but if you can't follow directions... I.E. I TOLD YOU IN THE FIRST POST THAT I WILL PM YOU DO NOT PM ME IT SEEMS HARD FOR PEOPLE TO FIGURE THAT OUT

No, don't send him a PM. He'll send YOU a PM. :D

psssniper
05-29-2010, 5:16 PM
Mr Wilit, I stand corrected sir:)

titus7
05-29-2010, 6:00 PM
Very interested in at least one maybe two depending on price. Waiting for PM

gidddy169
05-29-2010, 6:34 PM
Interested in a black anodized but it all depends on the price.

INFIDEL151
05-29-2010, 9:23 PM
im interested on the 80% lower too but depends on pricing.

siliconphreak
05-30-2010, 8:33 AM
Interested in 1, just depends on the price.

stan
05-30-2010, 11:09 AM
interested, D.O.P.

challenger
05-30-2010, 1:02 PM
Very interested. Do I qualify? Low itrader low post count. Will they be shipped from Z or straight from the manufacturer? I would hate to pay for shipping twice.

kduly
05-30-2010, 8:32 PM
.........

beb1954
05-30-2010, 9:05 PM
From the gitgo, this is my first time here for a GB. I am interested in one anodized depending on the price. It is my understanding that a PM will be sent to me at a later time. If I may ask a question (or two) prior of said PM, please let me know.
thanx.

stonx
05-30-2010, 9:12 PM
I am also interested, dependent on price, qualifying, and timing.

Thanks

GunPhonatic
05-30-2010, 11:27 PM
price?

fabguy
05-31-2010, 2:07 PM
I am also interested ( depending on price ), in approx. 8, of either anodized or plain or a mix. Please let me know.
Thank you,

MRpink
05-31-2010, 2:18 PM
Hey Z, hope all is well. Great meeting you at the AK party.

Interested in a few. Looking forward to hearing from you, thanks.

E-120
05-31-2010, 4:22 PM
Picked up 3 of these at the Canyon Country build. They look great. Should be pretty easy to finish.

E-120
05-31-2010, 6:46 PM
Here is a pic of my 80% lower I picked up at the Canyon Country build. Z is super easy to deal with.
http://i442.photobucket.com/albums/qq147/dhc-60/pistol.jpg
BTW, I am not interested in a 10/22. WTF does that mean? Who cares if you are not interested.

Roccobro
05-31-2010, 9:52 PM
Interested. Anodized.

Justin

Z ME FLY
06-01-2010, 6:59 AM
Hey thanks guys... yeah that one guy if you aren't interested that's fine, you do not have any itrader feedback anyways. I just got back from socal so give me a day or two and I'll get stuff together, I'm running on like 8 or 9 hours of sleep total since Friday morning.

If you want to know why I say DO NOT PM me and ask me all these questions? PSS pointed it out, I don't have the time to hold your hand and cupcake with you with the process. If you click on the link from my first group buy it would probably answer some questions about the 80%s. OR better yet there is this great thing called google and you type something in and it searches the whole internet for those words. Crazy huh?

If you ever run a GB, you will know the amount of headaches that are involved and how hard it is for me personally to keep track of my PMs. I talk to a ton of calgunners via pms only and if I mix random questions and I am interested in paperwts when I am not ready it just gets skipped.

Well anyways like I said, give me a day or two and I will go down the list.

Thanks!

psssniper
06-01-2010, 4:18 PM
Z

I'll take an anodized if there's any room left in the GB or any spares

grumpydan
06-02-2010, 6:23 AM
I'm interested in
one black anodized, if it's not to late to get into the GB.

feelinducky
06-02-2010, 6:51 AM
Interested in 1-2. Will wait for PM.
Thanks

CP562
06-02-2010, 8:55 AM
Interested in one or two of these...just completed my first PPT with a fellow CalGunner a week or two ago, not sure if it resulted in iTrader feedback.

Thanks for the time and effort spent on this.

in2protour
06-02-2010, 9:04 AM
put me down for one black anodized paper weight

foxtrotuniformlima
06-02-2010, 9:07 AM
interested

info please :D

Blood Ocean
06-02-2010, 10:28 AM
Interested in 1 unfinished

darkcbr1000rr
06-02-2010, 10:30 AM
I should point out though a drill press would be bad for milling out these 80% lowers. A mill would do a way better job.

I drill press' chuck is only meant to take force in the Z axis.

AngelDecoys
06-02-2010, 10:56 PM
Z. Will wait for a PM. Hope I'm not too late. Curious on price. Would take an anodized if there's any room left in the GB.

psssniper
06-02-2010, 11:26 PM
I should point out though a drill press would be bad for milling out these 80% lowers. A mill would do a way better job.

I drill press' chuck is only meant to take force in the Z axis.

Absolutely a mill is better, unfortunately I don't know anyone with a mill!
Here's what were talking about regarding using the drill press method.
http://www.cncguns.com/projects/ar15...utorial-2.html

Z ME FLY
06-03-2010, 3:52 AM
Absolutely a mill is better, unfortunately I don't know anyone with a mill!
Here's what were talking about regarding using the drill press method.
http://www.cncguns.com/projects/ar15...utorial-2.html

That is correct, a mill would be ideal for the job but the drill press works just fine. I know a couple of calgunners that use the drill press method and haven't had a problem.


Z. Will wait for a PM. Hope I'm not too late. Curious on price. Would take an anodized if there's any room left in the GB.

I'll send out PMs probably later today or tomorrow. Just been trying to recover from my socal trip.

Lex
06-03-2010, 5:36 AM
Any finish product/Functional from the first GB?

Z ME FLY
06-03-2010, 4:43 PM
PM SENT TO EVERYONE ON THE LIST

Z ME FLY
06-03-2010, 4:59 PM
Sorry for the short notice, my supplier is going out of town so he wants to ship the paperweights out to get anodized before he leaves for a couple of days. Usually it takes about 2-3 weeks for the anodized turn around.

Tunis
06-03-2010, 5:26 PM
Count me in for 2 anodized! :thumbsup:

Z ME FLY
06-03-2010, 5:31 PM
Count me in for 2 anodized! :thumbsup:

PM sent and answered your PM too

Lex
06-03-2010, 5:58 PM
I am interested.. please pm me.

fast5.0
06-03-2010, 6:03 PM
good guy to deal with i ordered 3 from him and theyre just like he described....now i just have to wait for a build party......

oldyeller
06-03-2010, 6:14 PM
+1 for Z, and these CAN be done on a drill press ;)

Z ME FLY
06-03-2010, 6:14 PM
good guy to deal with i ordered 3 from him and theyre just like he described....now i just have to wait for a build party......

I am sure soon enough there will be enough 80%s out there to make a BP out of it. Once that happens.... there will be AR pistols everywhere. Just remember everyone to follow all the rules and read up on what's legal and what's not please.

I am interested.. please pm me.

PM sent

Z ME FLY
06-03-2010, 6:18 PM
lowracer

please send me a PM with your email or something so I can contact you about this GB.

You cannot accept PMs.

!@#$
06-03-2010, 7:56 PM
any firm prices yet?

i never got the pm you said you would send.

Calif Mini
06-03-2010, 8:00 PM
PM me as I just lost my will power...................ughhhhhhh

LOL

Ed.

ps: interested! PM sent too.

gadjeep
06-03-2010, 8:13 PM
VERY interested. Does your comment about the anodizing turnaround time mean that raw units would ship sooner? Thanks for doing this! :clap:

Z ME FLY
06-03-2010, 8:33 PM
any firm prices yet?

i never got the pm you said you would send.

Did you post here? If you did I must have missed it because I don't think I saw it. I asked people to only post not to PM me about the GB.

VERY interested. Does your comment about the anodizing turnaround time mean that raw units would ship sooner? Thanks for doing this! :clap:

Maybe, maybe not just depends on when everything will be ready. Usually I need to transfer all the money to my acct then pay for the paperwts all at once. It usually takes about a week for that.

Rockit
06-03-2010, 8:44 PM
Very interested. Price?

1022rimfire
06-03-2010, 9:22 PM
Interested in one black anodized, depending on price. Thanks!

lickitysplit
06-03-2010, 9:32 PM
Interested in an anodized one. Send me info. Thanks.

NorCalDustin
06-03-2010, 10:18 PM
Interested in 1-2 depending on price. Please PM me...

patriot_man
06-03-2010, 10:51 PM
Definitely interested in 1 black and if the price is low enough I will take 2. PM me with the price and I will send you a payment.

gidddy169
06-04-2010, 7:07 AM
Never received a PM interested in Black anodized.

SVRider
06-04-2010, 7:51 AM
Interested.

Send me a PM when you have a chance.

greyhd
06-04-2010, 8:05 AM
Interested. Please PM me with details.

Thanks.

SPaikmos
06-04-2010, 12:02 PM
Interested, please PM me.

zer0bot
06-04-2010, 12:56 PM
Interested depending on pricing

Z ME FLY
06-04-2010, 1:13 PM
to the people I pmed, please respond if you are interested or not, thanks

rino
06-04-2010, 7:08 PM
--------------------------------------------------------------------------------

Interested. Please PM me with details.

ironman5669
06-04-2010, 7:30 PM
I know i dont have i trader feedback, but i will pay cash up front, please pm me< im not a pain in the a** I swear! i want two unanodized

Z ME FLY
06-06-2010, 9:49 AM
post here if you are still interested. I ordered a couple of extra ones for me.

Luc
06-06-2010, 9:52 AM
Interested. Please PM pricing on both in-the-white and anodized. Thank you.

SPaikmos
06-06-2010, 10:21 AM
Still waiting for PM. I'd like 2-3 anodized, depending on price.

psssniper
06-06-2010, 11:23 AM
Jig for the jig

http://i13.photobucket.com/albums/a281/psssniper/80jigjig.jpg

Z's 80% raw & fini

http://i13.photobucket.com/albums/a281/psssniper/80fini.jpg

Z ME FLY
06-06-2010, 11:48 AM
Jig for the jig

http://i13.photobucket.com/albums/a281/psssniper/80jigjig.jpg

Z's 80% raw & fini

http://i13.photobucket.com/albums/a281/psssniper/80fini.jpg

A thing of beauty! and what did you do it with?!?! a drill press! :)

This is proof that it is very doable with a drill press, jig, got end mill bits and some time. I please Psssniper did it within 3 hours. His next couple should be a little bit better and done fast too. Probably in a month or so I will get mine done.

I'll open up the GB to more people since we have a good amount confirmed and paid for already. Thanks everyone!

rino
06-06-2010, 12:06 PM
when i get mine (and start on it ) i will post pics of the process, it shuold take less then a hour! i have a mill:D and no so dont ask

arfan66
06-06-2010, 4:18 PM
CONFIRMED!!

TUNIS (2) BLACK PAYMENT SENT
TABOOAR (3) WHITE PAID
Kduly (2) BLACK PAYMENT SENT
LEX (1) BLACK PAID
CALIF MINI (1) BLACK PAYMENT SENT
Stan (1) White PAID
grumpydan (1) WHITE PAID
arfan66 (1) WHITE PAID
PITSTOP911 (2) BLACK PAID
MRPINK (4) WHITE PAID
ANGELDECOYS (1) BLACK PAID
CUAHITL (1) BLACK PAID
ONEAPART (1) BLACK PAYMENT SENT
FOXTROTUNIFORMLIMA (1) WHITE PAID
LICKITYSPLIT (1) BLACK PAID
PATRIOT_MAN (1) BLACK PAYMENT SENT
ONEAPART (1) BLACK PAYMENT SENT
RINO (1) WHITE PAID
JAR15SP1 (1) BLACK PAID

11 WHITE, 16 BLACK PAID FOR




ETA WE ARE LOOKING ABOUT 2 WEEKS. IT TAKES ABOUT 2 WEEKS TURNAROUND TIME FOR THE ANODIZED 80%S. I WILL UPDATE WITH A POSTS ONCE THINGS SHIP OUT AND WHO'S HAS SHIPPED OUT. ONCE I GET THE PAPERWTS, I SHIP THEM OUT WITHIN A DAY OR TWO.

Z Please confirm my order. Paid for anodized but is listed above as white. PM is fine. Thanks.

Jeff

Z ME FLY
06-06-2010, 5:30 PM
Z Please confirm my order. Paid for anodized but is listed above as white. PM is fine. Thanks.

Jeff

Sorry it was right on my spreadsheet but wrong on the post. Thanks for letting me know.

DrediKnight
06-06-2010, 5:49 PM
PM me please

powderburns
06-06-2010, 5:55 PM
Interested please PM.

Z ME FLY
06-06-2010, 6:20 PM
PMs sent out you guys

TZL
06-06-2010, 8:29 PM
My payment for two whites sent, please confirm, thanks

Z ME FLY
06-06-2010, 9:16 PM
My payment for two whites sent, please confirm, thanks

Got it, will update thread tomorrow

thanks!

Obviously a Plant
06-06-2010, 9:27 PM
Interested in a few, looking forward to a PM, thanks.

zer0bot
06-07-2010, 8:16 AM
Still interested.

Thanks
Jason

Z ME FLY
06-07-2010, 9:23 AM
UPDATED THREAD WITH LIST OF PAID PEOPLE

Z ME FLY
06-07-2010, 9:27 AM
I have more :)

By my count I have about 20 more of each

Z ME FLY
06-07-2010, 10:13 AM
Out of RESPECT for me and this group buy DO NOT MENTION PRICES TO CALGUNNERS PMing you about it. If they really wanted to know they can PM me. ONCE AGAIN DO NOT MENTION PRICES TO ANYONE... thank you, this will allow me to continue to work group buys for calguns if there is no drama.

Roccobro
06-07-2010, 10:34 AM
Still interested. Nothing in my Inbox yet.

If they really wanted to know they can PM me.
Are we allowed to PM you now without getting banned from the GB???

Justin

epkid
06-07-2010, 10:47 AM
I'm interested in 2 in the white depending on price.

Thanks
Chad

Z ME FLY
06-07-2010, 11:42 AM
Still interested. Nothing in my Inbox yet.


Are we allowed to PM you now without getting banned from the GB???

Justin

No, just post here and I will PM you. PMs from unknown members tend to get lost in the shuffle. For example right now I am talking with 4-5 different calgunners over PMs about various stuff.

Will send you a PM Justin



I'm interested in 2 in the white depending on price.

Thanks
Chad

Will send you a PM Chad

Jason_2111
06-07-2010, 12:03 PM
I'm interested in 1 or more in White, depending on price.

Please PM me when you have time. :)

Roccobro
06-07-2010, 12:33 PM
Will send you a PM Justin

Got it. :)

Paying for 2 now....

Justin

gmcem50
06-07-2010, 11:07 PM
Interested; I await your PM.

Z ME FLY
06-08-2010, 4:22 AM
PMs replied and sent out

TabooAR
06-08-2010, 5:59 PM
Forgot to ask if the whites ship first or if they all go at the same time. :gunsmilie:

Jeffu
06-08-2010, 6:09 PM
Interested in 2 or 3

Z ME FLY
06-08-2010, 8:21 PM
Forgot to ask if the whites ship first or if they all go at the same time. :gunsmilie:

They will probably go at the same time. My guy is out of town until this weekend..... sooooo.... MAYBE things might be done early we will see!!

wrench
06-08-2010, 8:38 PM
I may be interested in one or two, depending on price....

veterosa
06-08-2010, 8:57 PM
Deal with confidence. Z is the man.

robertstone9
06-08-2010, 9:08 PM
price

anhero
06-08-2010, 9:14 PM
interested in 2 pending price

Z ME FLY
06-08-2010, 9:19 PM
PMs sent....

fotoapparat
06-08-2010, 9:31 PM
Interested depending on price.

RANGER295
06-08-2010, 9:40 PM
Could you please shoot me a PM with a price if there are any more available? Also, do you have a source for a good deal on the jig to finish it?

Z ME FLY
06-08-2010, 10:29 PM
Could you please shoot me a PM with a price if there are any more available? Also, do you have a source for a good deal on the jig to finish it?

i'll send you a PM, i haven't gotten that far in my personal building process to figure out the jigs. Sorry about that.

goober
06-08-2010, 10:31 PM
Could you please shoot me a PM with a price if there are any more available? Also, do you have a source for a good deal on the jig to finish it?

i'll send you a PM, i haven't gotten that far in my personal building process to figure out the jigs. Sorry about that.

CNC Gunsmithing or TM. either one will do just fine.
'nuff said.

Z ME FLY
06-08-2010, 10:36 PM
speaking of cnc....

here is the tutorial i posted before
http://www.cncguns.com/projects/ar15lower80tutorial-2.html

morepoop4u
06-08-2010, 11:36 PM
interested let me know the price

hypnoman
06-08-2010, 11:44 PM
interested

Z ME FLY
06-09-2010, 5:43 AM
PMs sent

Surfdog
06-09-2010, 6:26 AM
Interested in 3.
Thanks

Sheldon
06-09-2010, 6:30 AM
Interested....p.m. me.

Z ME FLY
06-09-2010, 7:01 AM
PM SENT

Z ME FLY
06-10-2010, 5:33 AM
people in the current group buy....

interested in some stripped uppers? mil spec, anodized good stuff...has ejection port and forward assist assembly that you install..

maybe $85-90 shipped?

MetalJesus
06-10-2010, 5:39 AM
Interested in 2 anodized. PM please.

SPaikmos
06-10-2010, 5:47 AM
people in the current group buy....

interested in some stripped uppers? mil spec, anodized good stuff...has ejection port and forward assist assembly that you install..

maybe $85-90 shipped?

Any pics? Interested, yes.

TurboChrisB
06-10-2010, 6:07 AM
Please pm me with price for 1 or 2...

TabooAR
06-10-2010, 6:38 AM
people in the current group buy....

interested in some stripped uppers? mil spec, anodized good stuff...has ejection port and forward assist assembly that you install..

maybe $85-90 shipped?

Possibly!

A2, A3, A4? M4 ramps or no? Available white?

incredablehefey
06-10-2010, 7:02 AM
im interested in 1 "white" lower if available

akuracls
06-10-2010, 9:38 AM
Interested in 1, just depends on the price.

Z ME FLY
06-10-2010, 10:50 AM
Possibly!

A2, A3, A4? M4 ramps or no? Available white?

No white and no M4 ramp..

"Machined from 7075T6 Forgings
Stripped
Mil-Std- 1913 Rail for mounting optics and accessories
Laser etched T-markings for addressing the remounting of optics"

http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-4.jpg
http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-3.jpg
http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-2.jpg

Ladies! PMs sent....

thread about the stripped uppers

http://www.calguns.net/calgunforum/showthread.php?t=310465

please post there for interest

Gio
06-10-2010, 10:59 AM
Nice!

Z ME FLY
06-10-2010, 1:32 PM
LIST UPDATED PLEASE LMK IF YOU PAID AND NOT ON IT OR IF I MADE A MISTAKE

PLEASE POST HERE IF YOU ARE INTERESTED IN A STRIPPED UPPER
http://www.calguns.net/calgunforum/showthread.php?t=310465

goober
06-10-2010, 6:33 PM
what's with the "post and get a PM for price" policy?
if this is a FS/GB thread i believe you need to post a price.
(sorry if you did and i missed it amongst all the "how about a price?" replies)

Toyz
06-10-2010, 6:44 PM
Interested in 2, please pm me with price. thanks.

Z ME FLY
06-13-2010, 10:49 AM
HEY GUYS!!!!!

I will be picking up some in a couple of days so I will ship some out when I get them.

NO I did not forget about you guys!!!

:83:

rosmar1969
06-13-2010, 10:50 PM
Bump for the Z-Man!!! you the man!!!;)

Tunis
06-13-2010, 11:08 PM
HEY GUYS!!!!!

I will be picking up some in a couple of days so I will ship some out when I get them.

NO I did not forget about you guys!!!

:83:

:clap:

Z ME FLY
06-13-2010, 11:27 PM
Yeah there was traffic everywhere in the Bay this weekend...

Also my GF found a Corgi dog in her backyard so I have been dealing with the dog all day. It's in not so good shape, nails grown out and twisted, teeth are dark brown color, has a sore on it's foot.

I tried my best to patch him up but we gotta take him to a vet.. I just hope it doesn't cost that much...

Roccobro
06-14-2010, 11:01 AM
I just hope it doesn't cost that much...

Kiss your gun money for a few months goodbye...

Justin

Z ME FLY
06-14-2010, 11:07 AM
Just a little update, I will be picking up some of the order tomorrow and the rest probably this weekend. I will ship them out as I get them and post SNs with who's has been shipped.

Thanks!

GunPhonatic
06-14-2010, 11:44 AM
can i get a price quote?

HighRatMaster
06-15-2010, 4:15 PM
PM sent

hella agg
06-15-2010, 5:37 PM
Interested in two black anodized ones. PM me, please.

Rockit
06-15-2010, 6:02 PM
PM sent!

Z ME FLY
06-15-2010, 7:34 PM
http://i298.photobucket.com/albums/mm279/zmefly0130/061510202009.jpg

http://i298.photobucket.com/albums/mm279/zmefly0130/061510201959.jpg

http://i298.photobucket.com/albums/mm279/zmefly0130/061510201947.jpg

Ran out of boxes but we have a bunch packed and ready to ship

Roccobro
06-15-2010, 7:50 PM
I can see mine... :)

Justin

veterosa
06-15-2010, 7:55 PM
Lakers won so order from Z just in time for the BP.

dirtydeedsdoneinthedesert
06-15-2010, 8:25 PM
I'm interested. Please advise me on pricing.

Also, anyone in the central coast have a jig that I could borrow?:D

Z ME FLY
06-16-2010, 10:17 AM
Tunis
TabooAR
kduly
Lex
Calif Mini
stan
grumpydan
arfan66
pitstop911
angeldecoys
Cuahitl
lickitysplit
patriot_man

Yours has shipped.... socal takes 2 days norcal 1 day normally...

thank you

Z ME FLY
06-16-2010, 12:00 PM
foxtrotuniformlima
Rino

Jack_Bauer
simplenamez
tzl

Ironman5669
Cp562
blood ocean
fotoapparat
JeffU
Jason_2111
Hypnoman
Incredablehefey
gmcem50
Toyz

Yours has shipped...... I will be picking up the rest later this week and shipping out next week

thanks

foxtrotuniformlima
06-16-2010, 2:37 PM
How cool! thanks for the info Z.

stan
06-16-2010, 3:28 PM
are you shipping these with delivery confirmation numbers, for those of us who have problems with packages going missing lately?

ArkinDomino
06-16-2010, 5:47 PM
Interested in 1 black pending price info

Tunis
06-16-2010, 11:11 PM
Tunis
TabooAR
kduly
Lex
Calif Mini
stan
grumpydan
arfan66
pitstop911
angeldecoys
Cuahitl
lickitysplit
patriot_man

Yours has shipped.... socal takes 2 days norcal 1 day normally...

thank you

I just received my 2 paperweights!!! THANK YOU!!! :D

Charlie50
06-17-2010, 1:57 PM
The mail lady just arived with nice neat little package for me... could it be? YES! Just a quick scan of my new paperweights and they look good. Ahh yes so many projects so little time and dwindling money supplies for toys. Now what to build, what to build, such weighty problems to bear. :D Thanks again.

iambrian
06-17-2010, 2:54 PM
Interested in a white 80% please let me know pricing info. Thanks

Calif Mini
06-17-2010, 5:19 PM
Got mine today. Much sooner and faster than anticipated.

Just as I expected.

Now just need to make some chips.

Thanks to "Z" I now have a little less money but am looking forward to a new fun project.

Deal with confidence.

Thanks again, Ed

arfan66
06-17-2010, 7:45 PM
Got mine today too. Looks great! Now I just have to decide what I want engraved on it ;)! Thanks Z!

positive itrader feedback on the way...

Jeff

stan
06-18-2010, 2:49 PM
purrtyyy lower!

Lex
06-18-2010, 3:11 PM
Guys.. i just got mine today... thanks to Z... however, i think this is too much work for me to make it work. If you are interested in one.. please pm me...

bluebellyr6
06-18-2010, 3:43 PM
i will take a black one

rino
06-18-2010, 6:08 PM
i got mine today!, and yes it looks off a bit but i put in a trigger gaurd and it all lines up nice, im happy with it

thank you z !

patriot_man
06-18-2010, 7:36 PM
got mine! Couldn't be happier thanks!

grumpydan
06-18-2010, 8:17 PM
If i was to buy a template or a milling adapter to finish this which company would work best on this lowern any suggestion, or will any adapter/template work?

Thanks
Dan

Z ME FLY
06-18-2010, 8:17 PM
i got mine today!, and yes it looks off a bit but i put in a trigger gaurd and it all lines up nice, im happy with it

thank you z !

Thanks Rino, that is what Stan and I had talked about via PMs. I am glad that it lines up perfectly since that is what I had let him know also.

arfan66
06-18-2010, 8:48 PM
If i was to buy a template or a milling adapter to finish this which company would work best on this lowern any suggestion, or will any adapter/template work?

Thanks
Dan

I have only used the Tactical Machining jig and it works well. Check out VaderSpade's tutorial in the gunsmithing forum.

Jeff

hypnoman
06-18-2010, 8:55 PM
Thanks Z!! Really cool!

Z ME FLY
06-18-2010, 8:55 PM
I have only used the Tactical Machining jig and it works well. Check out VaderSpade's tutorial in the gunsmithing forum.

Jeff

+1 for Tactical Machining, also people have used the cnc jig and it works too.


EDIT::
Have you guys noticed that since I started the 80% GBs..... a lot more people are selling 80%s here? :)

I started a trend!

makav3li
06-18-2010, 9:07 PM
+1 for Tactical Machining, also people have used the cnc jig and it works too.


EDIT::
Have you guys noticed that since I started the 80% GBs..... a lot more people are selling 80%s here? :)

I started a trend!

i too noticed that, start a trend on free float rails!!!!

Z ME FLY
06-18-2010, 9:34 PM
i too noticed that, start a trend on free float rails!!!!

Also I started the trend on Dracos too but yeah that one turned out bad LOL

I do want free float rails on my AR pistol

incredablehefey
06-18-2010, 9:39 PM
got mine, good quality!

Tunis
06-18-2010, 10:06 PM
Got mine ready to go in a Tactical Machining jig. I will mill it out after the show this weekend. Thanks again Z! :thumbsup:

arfan66
06-18-2010, 11:44 PM
Also I started the trend on Dracos too but yeah that one turned out bad LOL

I do want free float rails on my AR pistol

I bought a VTAC/Troy TRX Extreme rail for my pistol build. http://store.troyind.com/Lamb_Universal_Viking_Sling_Attachment_p/strx-eli-c8bv-00.htm It has ovals/slots vs. holes in the Troy version. It gives it a kind of Spandau look to the gun. Very nice indeed...

stan
06-19-2010, 2:28 AM
hey Z when you have time will you be returning itrader feedback?

Z ME FLY
06-19-2010, 7:09 AM
hey Z when you have time will you be returning itrader feedback?

Yes I will, I will do it when I get some free time.

Thanks

Z ME FLY
06-20-2010, 10:58 AM
shipping out the rest on Monday... Thanks everyone :)

It's funny that people are still b!tc#ing about how I run the GB. Well if the supplier doesn't want to be named or prices listed... Well I follow that...

If you want to complain about how I don't want to hold your hand and answer all of your questions about how to finish an 80%, why should you do one, what are all the exact laws regarding it well... we have an awesome thing called google or even a calguns google search and you can find all the answers there. Seriously getting a bunch of PMs everyday about how do you do this or that and why should you buy an 80% well.... you should do some research before you go into it..

I'm just saying you want to complain about the way I am... that's fine with me because all the Calgunners who have meet me known I'm a cool dude haha

Call it bad customer service if you want, I'm not a business or a company I'm one person getting a ton of PMs everyday about the same question that can be simply answered with a 5 min search online.

If you have the balls to run a GB you will find out how much of a headache they are when you don't even make any money at all. For the couple of dollars I made, it is not worth the headache and complaining that I get from people all the time online.

Meet me offline and talk you crap if you want... We will see if your attitude stays the same keyboard commando...

SPaikmos
06-20-2010, 11:34 AM
Call it bad customer service if you want, I'm not a business or a company I'm one person getting a ton of PMs everyday about the same question that can be simply answered with a 5 min search online.

If you have the balls to run a GB you will find out how much of a headache they are when you don't even make any money at all. For the couple of dollars I made, it is not worth the headache and complaining that I get from people all the time online.

Meet me offline and talk you crap if you want... We will see if your attitude stays the same keyboard commando...

I dunno who's giving you crap, but I certainly appreciate the efforts you do. Bottom line, I don't give a f#ck how much you make off of me; you tell me what the price is and I decide whether I think it's fair or not. If I don't like your price or your methods, then I won't buy.

Your instructions were explicitly clear from the beginning. Your methods are a little odd, but whatever. I'm willing to play by your rules to get what I want.

People these days just like to b#tch about anything and everything. It's being bred in our culture to become a bunch of whiners, instead of accepting personal responsibility.

Anyways, a heartfelt thanks for your efforts. I know that whatever pittance you make isn't worth the headache. If we meet in person, I'd be more than happy to buy your dinner!

goober
06-20-2010, 11:47 AM
shipping out the rest on Monday... Thanks everyone :)

It's funny that people are still b!tc#ing about how I run the GB. Well if the supplier doesn't want to be named or prices listed... Well I follow that...

If you want to complain about how I don't want to hold your hand and answer all of your questions about how to finish an 80%, why should you do one, what are all the exact laws regarding it well... we have an awesome thing called google or even a calguns google search and you can find all the answers there. Seriously getting a bunch of PMs everyday about how do you do this or that and why should you buy an 80% well.... you should do some research before you go into it..

I'm just saying you want to complain about the way I am... that's fine with me because all the Calgunners who have meet me known I'm a cool dude haha

Call it bad customer service if you want, I'm not a business or a company I'm one person getting a ton of PMs everyday about the same question that can be simply answered with a 5 min search online.

If you have the balls to run a GB you will find out how much of a headache they are when you don't even make any money at all. For the couple of dollars I made, it is not worth the headache and complaining that I get from people all the time online.

Meet me offline and talk you crap if you want... We will see if your attitude stays the same keyboard commando...


Anyone that complains or whines that you are not providing instructions or enough info about how or why to complete an 80% lower should probably not consider taking on such a project. These folks should stick to buying finished products.

The other concerns regarding following CGN Marketplace rules are another matter. But apparently the mods have allowed you to run the GB this way, and you seem to have many happy customers, so I suppose there is not much to gain by discussing those matters either.

Calif Mini
06-20-2010, 6:35 PM
"Z" told me how much.................

Said about how long it would take...............

I made my own decision to go ahead and get one from him..........

And............................................... ......................................

He delivered not only the product he represented, but did it in record time...............

My hat is off to anyone doing a group buy for little appreciation.................

Thanks again "Z"

Z ME FLY
06-21-2010, 11:06 AM
Roccobro
MetalJesus
zer0bot
Jar15sp1
obviously a plant
Spaikmos

yours has been sent...

Group buy CLOSED....

if I didn't get your money already then..... I don't have one for you.

Will be returning itrader feedback to everyone tonight or tomorrow.

SPaikmos
06-21-2010, 11:15 AM
Sweet. I assume that's all the ones that I ordered? Looking forward to my mail now! Thanks man.

CP562
06-22-2010, 9:57 PM
Takes a certain kind of guy to organize a pack of CalGunners together for a GB and successfully pull it off. Z ME FLY is that kind of guy...and an asset to the boards.

Many thanks to you sir, look forward to meeting you at a future BP or other event.

:cheers2:

Z ME FLY
06-22-2010, 10:15 PM
Okay so I just left a gang load of itrader feedback for everyone...

If I missed you please PM me to let me know because it's hard for me to keep track of all of it. I go over the posts in this thread and click on your itrader to leave it. It's a PIA to do it any other way. Haha if you know a easy way LMK!

If interested in a stripped upper.. please post in the thread linked below

http://www.calguns.net/calgunforum/showthread.php?t=314520


Do we have any interest in some stripped uppers with the ejection port cover and forward assist assembly included but not installed?

Here are the specs..
Stripped Flat Top Upper Receiver.
Machined from 7075T6 Forgings
Forward Assist Assembly
Mil-Std- 1913 Rail for mounting optics and accessories
Laser etched T-markings for addressing the remounting of optics
No M4 Ramp
Anodized not unfinished
Made by USGI Contractor


PERFECT FOR A 9MM UPPER BUILD :)

http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-4.jpg
http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-3.jpg
http://i298.photobucket.com/albums/mm279/zmefly0130/FlatTopUpper1Strip-2.jpg

$80 shipped

depending on interest, if you purchased an 80% from me I can probably give a discount, not 100% sure yet.

Ideally I need 25 and that would be it. I want to see if there is actually interest or not before actually moving forward

ALSO.....
I am thinking that if we are able to get 25, I can include an unfinished 80% lower or TWO for one or two people at random... or maybe i can include an additional upper for a few.

Just post here if you are interested. Thanks.

INTERESTED...
LBC710
MOFUGLY13
E-120
FAST5.0
MUSHREW