PDA

View Full Version : WTT/WTS AR-15 in Ventura or San Diego $700


jfuller
05-27-2010, 6:19 PM
WTT
What I have to trade is a complete AR-15. I built this AR from many different parts. Some of which, I can't remember the names of so bare with me.

Lower and Upper are JD Machine. These guys are awesome and make a quality product. Lower parts are Timberwolf Stainless. The barrel is a 1/9 twist but manufacturer unknown because I acquired it from my uncle. True Glo red dot. Bolt and assembly from Quantico Tactical in Oceanside, CA. Ambi-Selector. It needs a bullet button if you're not LE, so I will make it CA compliant for you if you need it so. I shot this today and everything seemed to work fine. No misfires or malfunctions. I will be taking it to Shooters Paradise tomorrow to have my gunsmith test it and make sure that I haven't missed anything. I don't know about the barrel as it wasn't bought by me new. But I was told it was never attached to anything.

I am including a magazine and 275+ rounds of ammo.

Ultimately what I am looking to do is build a 308. So I would trade for a stripped 308 lower and upper. But I also love glocks, belgium brownings o/u, pythons, 1911's, m1 carbine, glock 34, I can supply cash on my end. Or maybe something else?

Cash $700

I posted better quality pics.

Thanks for looking and bumps are appreciated.

Aitch
05-27-2010, 6:52 PM
WOW. An Australian Compliant AR15... you don't see those everyday!

jfuller
05-27-2010, 7:39 PM
WOW. An Australian Compliant AR15... you don't see those everyday!
I changed the pics so you dont have to be upside down to see them. Thanks for the heads up.

E-120
05-27-2010, 7:47 PM
Nice looking rifle/

ajchinelo
05-27-2010, 7:49 PM
Good deal, but I have to say, I got a little scared when you said you never fired it before and you built from scratch...........

Joe
05-27-2010, 7:51 PM
awesome deal.

jfuller
05-27-2010, 7:52 PM
Good deal, but I have to say, I got a little scared when you said you never fired it before and you built from scratch...........
I understand, that makes sense. I have built a few in the past though and I will provide the name and number of the gunsmith who goes through it to ensure it functions properly before I sell it.

biker777
05-27-2010, 8:01 PM
is the barrel chrome lined?

jfuller
05-27-2010, 10:14 PM
I really don't know a lot about the barrel. I was told that it is a military barrel. It measure 19"+/- and the only marking that I found was "12." But I don't think thats the twist.

scotty1111
05-28-2010, 9:12 AM
Soooooo tempting

jfuller
05-28-2010, 6:37 PM
BTT 5/28

took the gun to iron sights in Oceanside CA and had them check it out. They said that it was good to go but needed a pin for the gas line. I bought the piece and had Quantico Tactical in Oceanside install it. So now everything is there and installed, I just haven't had a chance to shoot it. Trades?

catchmychainsaw
05-28-2010, 7:05 PM
bump for a great deal. This is the first AR I've seen for less then 1k since early 2009. Somebody snatch this deal up!

Richie Caketown
05-28-2010, 7:36 PM
yeah i remember paying almost this much for an AR upper

can i just lowball you on the ammo :)

jfuller
05-29-2010, 5:22 PM
BTT 5/29. I'm going to shoot this tomorrow at shooters paradise in Oxnard to ensure that it works. I can install the bullet button for $40. Otherwise it will come without the magazine release.

ImPoster
05-29-2010, 8:39 PM
I can verify everything jfuller is saying. He was talking with the guys from Shooters about this today when I bought his Sig from him. Great seller and trustworthy guy.

jfuller
05-30-2010, 12:52 PM
I can verify everything jfuller is saying. He was talking with the guys from Shooters about this today when I bought his Sig from him. Great seller and trustworthy guy.

BTT 5/30

lepcur
05-30-2010, 6:08 PM
I can't believe this is still here!

jfuller
05-30-2010, 6:36 PM
I can't believe this is still here!

I posted better pics and test fired it today. Everything works great. I will be taking it to Shooters Paradise in Oxnard tomorrow to have my gunsmith check it all out again as well as install the Bullet Button.

jfuller
05-31-2010, 10:27 AM
BTT 5/31

brdrgrd
05-31-2010, 11:58 AM
Would you consider the M1 carbine I have listed in trade?

jfuller
05-31-2010, 4:25 PM
Would you consider the M1 carbine I have listed in trade?
I am interested in your M1 Carbine but could you post or sent me better pictures?

As for the my AR, I shot 50-70 rounds through it today at shooters paradise. The bullet button was installed and everything worked perfectly. The guys at shooters went through the AR, function checked it, installed the BB, and oiled it properly. It's just about as simple as they come but its still fun to shoot.

trob
05-31-2010, 5:24 PM
BTT 5/28

took the gun to iron sights in Oceanside CA and had them check it out. They said that it was good to go but needed a pin for the gas line. I bought the piece and had Quantico Tactical in Oceanside install it. So now everything is there and installed, I just haven't had a chance to shoot it. Trades?

were you there on friday? think i saw him taking the hand rails off your gun.

jfuller
05-31-2010, 6:52 PM
were you there on friday? think i saw him taking the hand rails off your gun.
Yup that was me. I was talking with two guys about the AR. The Iron Sights guy couldn't have been more helpful, they will definitely be getting more business from me. He was taking the hand rails off to make sure that the gas line wasn't tweaked (it wasn't).

Small world

jfuller
05-31-2010, 7:54 PM
All PMs replied to. Lowball offers denied. Come on, I'm already lowballing myself...

todd2968
05-31-2010, 10:41 PM
All PMs replied to. Lowball offers denied. Come on, I'm already lowballing myself...



Don't like lowballs then don't post OBO!!!!

jfuller
05-31-2010, 11:47 PM
Don't like lowballs then don't post OBO!!!!
You're right I'll take the obo off. For some reason I thought people would be reasonable and give mutual respect in making their offers, perhaps staying away from 400-450 offers. Live and learn

Bonecrusher
06-01-2010, 1:40 AM
I'll take it, Per our PM's!

See you tomorrow.