PDA

View Full Version : LWRC


LWRC
05-14-2010, 8:15 AM
Hello everyone! I am a newly registered member, and also a western region rep for LWRC. Please shoot me an e-mail or message with any questions or concerns you have with LWRC.:44::44:

winnre
05-14-2010, 8:32 AM
Hello everyone! I am a newly registered member, and also a western region rep for LWRC. Please shoot me an e-mail or message with any questions or concerns you have with LWRC.:44::44:


Got any coupons for us CGN folks? :D

djleisure
05-14-2010, 8:41 AM
Welcome to Calguns! Always good to see factory reps around - nothing like information straight from the source!

phamkl
05-14-2010, 8:59 AM
Other than LWRC AR's, what do you got?

Do you have a favorite LWRC?

If you could have LWRC make anything you wanted, what would you have them do?

Just curious is all.

Toolbox X
05-14-2010, 9:13 AM
When does the side charging 5.56 M6 with REPR rail system and right side bolt hold open/release come out? :)

LWRC
05-14-2010, 9:15 AM
We have it currently under development now. We do not yet have an anticipated release date. I will keep you posted.

LWRC
05-14-2010, 9:17 AM
phamkl - I would probably take the fully auto PSD rifle in MRE. Fix it up with all the accessories and let it rip!

1 SIG fan
05-14-2010, 9:21 AM
Welcome to the boards.
PELASE PELASE PLEASE PLEASE tell me something good about the MRE finish for the REPR i have on order.

this one wants a big brother:
http://ssvworks.com/sitebuilder/images/DSC03723-600x450.jpg

LWRC
05-14-2010, 9:24 AM
We are shooting for late June to middle July. They are going to be worht the wait. We have manufactured a few M6's in MRE and the color is great!

1 SIG fan
05-14-2010, 9:25 AM
how different then above?

I hope so... 6 months is long and if I didn't love the M6a3 i wouldnt be so patient.

CHS
05-14-2010, 9:55 AM
If you could have LWRC make anything you wanted, what would you have them do?


REPR Pistol :)

LWRC
05-14-2010, 10:14 AM
It would be hard to hold!:32:

Toolbox X
05-14-2010, 10:18 AM
It would be hard to hold!:32:

Yes, but it would allow us to legally own the 12" upper in our non-SBR state. :43:

b.faust
05-14-2010, 10:20 AM
Hello everyone! I am a newly registered member, and also a western region rep for LWRC. Please shoot me an e-mail or message with any questions or concerns you have with LWRC.:44::44:

Welcome to Calguns!

I have serious REPR lust. It's on the short list of "things I must have"
:)

Rhythm of Life
05-14-2010, 10:49 AM
Group Buy?

LWRC
05-14-2010, 11:03 AM
WE COULD PROBABLY WORK SOMETHIN OUT.

thmpr
05-14-2010, 11:27 AM
Website?

LWRC
05-14-2010, 11:34 AM
WWW.LWRCI.COM

UserM4
05-14-2010, 12:15 PM
I got to handle a REPR 20" at a local store and my jaw dropped. All I can say is that pictures don't do it justice. Now I'm really contemplating selling a couple of guns to buy one. And I never thought I'd get rid of any of my guns.

thmpr
05-14-2010, 12:16 PM
LWRCI mfg?

tacticalcity
05-14-2010, 12:20 PM
Welcome to Calguns.net LWRC. Congrats on LA SWAT using your rifle, and featuring it on a recent episode of The Deadliest Warrior on Spike TV. I would imagine that sort of publicity would give you a big bump in sales. Especially since the judges ruled it a superior weapon system to the HK G36 that GSG-9 was using.

556fmj
05-14-2010, 12:28 PM
Welcome western rep of Lwrc to calguns. I've been using a lwrc upper for the last 5 years when Darren and Jesse were with Grenadier Precision.

12:13
05-14-2010, 1:15 PM
This…
Group Buy?
This…
WE COULD PROBABLY WORK SOMETHIN OUT.
and This!
…Now I'm really contemplating selling a couple of guns to buy one. And I never thought I'd get rid of any of my guns.

Sadly, I'd have to part with a long gun or 2 but the sacrifice would be well worth it:D

stix213
05-14-2010, 1:22 PM
It would be hard to hold!:32:

I think that is half the fun :43:

Greg-Dawg
05-14-2010, 3:40 PM
Can I get a discount on this?
http://www.lwrci.com/images/Product/large/129.jpg

1 SIG fan
05-14-2010, 3:57 PM
Are you guys working on a 1911 still?

lwrc_gregg
05-17-2010, 12:11 PM
The 1911 is on the back burner but not forgotten.

lwrc_gregg
05-17-2010, 12:12 PM
Hello everyone as the title says I am Gregg and I am the Key account manager here at LWRC on the civilian side if you have any questions please feel free to contact Jamie or myself. Thanks for the support everyone.

T72MKIV
05-17-2010, 12:58 PM
Welcome to CGN the both of you. I get to pick up my 16.1 REPR on Friday :43:

When will 20" uppers be available for those that already have a REPR?

How much do you guys charge to drop in a Adjustable Geissele trigger if I'm sending a rifle back for work to be done?

Plisk
05-17-2010, 1:45 PM
I own one of your guy's M6A3s, 5.56. I am in love with this rifle, and have nothing but good things to say about it (that's because my wallet isn't allowed to speak). But it was well worth the money. What shocked me the most is it was zeroed out of the box. I was hitting human sized silhouettes at 300yards during it's first mag.

Keep up the good work you guys, I hope to own more of your products soon. Especially your 1911 project.

Colt-45
05-17-2010, 1:45 PM
Wecome to CGN. Great to have some DIRECT contact with the LWRC guys........

Do you guys plan on shipping rifles directly to CA ffl's(if you're not doing so already)?
(with bullet buttons and 10 round mags of course)

For example if I purchased one directly from you guys and had it shipped to my ffl.......

An M6A3 is definitely on my list.

thmpr
05-17-2010, 1:46 PM
What is the timeline of resolving the following issues with the REPR?

1) Mag catch release
2) Upper HG alignment (Misalignment)
3) Gas switch adjustment (frozen)

thmpr
05-17-2010, 1:55 PM
http://www.janes.com/events/exhibitions/sofex2010/sections/daily/day2/us-rifles-to-be-produced-.shtml

When will the transition take place? Would be great to buy LWRC while it is still mfg. in the US.

Outsourcing at the initial stages are painful for the consumers.

CHS
05-17-2010, 2:40 PM
http://www.janes.com/events/exhibitions/sofex2010/sections/daily/day2/us-rifles-to-be-produced-.shtml

When will the transition take place? Would be great to buy LWRC while it is still mfg. in the US.

Outsourcing at the initial stages are painful for the consumers.

Reading the article, I'm not getting that the LWRC's will be produced in Jordan for the US market. Only that Jordan will be producing them for THEIR market under license:


LWRC International has come to an agreement with KADDB whereby some of the latest weapons designed by the US company will be licence-produced in Jordan. This follows the selection of the Personal Security Detail (PSD) weapon to equip royal protection units with a weapon that is, unusually, of 6.8mm calibre.

Read the bolded parts :)

thmpr
05-17-2010, 2:41 PM
I hope so...

Lethal_addict
05-17-2010, 2:55 PM
Welcome...

Congrats on the newly aquired position! Who do we have the pleasure of speaking to?

I own 3 LWRC's :)

Hello everyone! I am a newly registered member, and also a western region rep for LWRC. Please shoot me an e-mail or message with any questions or concerns you have with LWRC.:44::44:

lwrc_gregg
05-18-2010, 5:16 AM
Welcome to CGN the both of you. I get to pick up my 16.1 REPR on Friday :43:

When will 20" uppers be available for those that already have a REPR?

How much do you guys charge to drop in a Adjustable Geissele trigger if I'm sending a rifle back for work to be done?

We have the 20" Uppers available as they are being built get with Jamie and he can get the pricing to you. As far as the trigger do you may be cheaper to buy the trigger and get it done locally. The trigger is around $275.00

lwrc_gregg
05-18-2010, 5:18 AM
Wecome to CGN. Great to have some DIRECT contact with the LWRC guys........

Do you guys plan on shipping rifles directly to CA ffl's(if you're not doing so already)?
(with bullet buttons and 10 round mags of course)

For example if I purchased one directly from you guys and had it shipped to my ffl.......

An M6A3 is definitely on my list.

We are already shipping to California! Get with Jamie (LWRC on CGN) and he will direct you to the appropriate FFL

lwrc_gregg
05-18-2010, 5:19 AM
What is the timeline of resolving the following issues with the REPR?

1) Mag catch release
2) Upper HG alignment (Misalignment)
3) Gas switch adjustment (frozen)

All REPR's shipping from the factory currently have all these issues taken care of and we appreciate everyones patience with this. We hope everyone is enjoying the REPR product line now.

Juice5610
05-18-2010, 11:44 AM
Can I have a saber? Thanks your the best!

bwiese
05-18-2010, 11:56 AM
Thanks LWRC for visiting/supporting here.

I had the pleasure of talking with Tammy Droege (I think I got that spelling right) about various CA compliance issues w/AR pistols and the single-shot exemption, and enjoyed meeting her at the SHOT Show. Please give her my greetings!

CHS
05-18-2010, 12:00 PM
Can I have a saber? Thanks your the best!

SABR = REPR

lwrc_gregg
05-18-2010, 12:11 PM
Thanks LWRC for visiting/supporting here.

I had the pleasure of talking with Tammy Droege (I think I got that spelling right) about various CA compliance issues w/AR pistols and the single-shot exemption, and enjoyed meeting her at the SHOT Show. Please give her my greetings!

Unfortunately Tammy is no longer with the company but thanks for stopping by the booth. We love the cali crowd and we are one of the only manufacturers that are shipping the gun compliant fro mthe factory.

1 SIG fan
05-18-2010, 12:11 PM
SABR = REPR

I THINK they produced SABRs before teh REPR switch, right? teh SABR did have a different free foat front which matches the m6 series better. I DO like the look of it better then the current REPR offering

CHS
05-18-2010, 12:38 PM
I THINK they produced SABRs before teh REPR switch, right? teh SABR did have a different free foat front which matches the m6 series better. I DO like the look of it better then the current REPR offering

The SABR never went into production. It was just a proof-of-concept/prototype. It eventually became the REPR.

The original SABR had a regular 4-rail forearm, while the REPR has a smooth one with rail sections you can strategically place where you need them. Probably keeps weight down, which is a good thing in a .308 rifle.

lwrc_gregg
05-18-2010, 12:42 PM
The SABR never went into production. It was just a proof-of-concept/prototype. It eventually became the REPR.

The original SABR had a regular 4-rail forearm, while the REPR has a smooth one with rail sections you can strategically place where you need them. Probably keeps weight down, which is a good thing in a .308 rifle.

bdsmchs is absolutely correct! The new REPR is an amazing .308 and I strongly encourage anyone that gets a chance to shoot it

thmpr
05-18-2010, 12:48 PM
Thank you for answering my earlier questions and concerns. Will wait for another 6 months till I jump on the REPR bandwagon.

shark92651
05-18-2010, 2:41 PM
We are already shipping to California! Get with Jamie (LWRC on CGN) and he will direct you to the appropriate FFL

LWRC has been one of the most, if not the most CA-friendly AR manufacturers out there!

We have been stocking quite a few of their products for quite awhile
http://riflegear.com/m-55-lwrc.aspx

45R
05-18-2010, 2:44 PM
Some new LWRCI rail options would be nice.

wsmc27
05-18-2010, 2:50 PM
LWRC has been one of the most, if not the most CA-friendly AR manufacturers out there!

We have been stocking quite a few of their products for quite awhile
http://riflegear.com/m-55-lwrc.aspx

Ooooohhhhhhh NICE!

Welcome LWRC!

Think I see some "wish list" goodies there! ;)

Aftermath686
10-08-2010, 9:22 PM
Some new LWRCI rail options would be nice.

THIS!!! I need a longer rail for my M6A2. It seems this wouldn't be to hard to cook up. How much longer LWRCi?

SigEquinox
10-09-2010, 2:09 AM
When does the side charging 5.56 M6 with REPR rail system and right side bolt hold open/release come out? :)

And fluted barrel. And *hopefully* using a mid-length stroke.

The Tricon is tempting, but it's A2 based, not A3 :(