PDA

View Full Version : WTB: Complete 6.8 Upper


goodlookin1
04-28-2010, 6:10 PM
Hey guys,

Just wanted to throw a feeler out there for a 6.8 Upper. I'm thinking about either trading for my 5.56 CMMG upper or just outright buying another upper. In any case, the mandatory specs that I want are: 16" barrel, SPC II spec, midlength gas block, and a 1-11" through 1-12" twist rate. Bonuses would be things like quad rails, custom gas blocks, polygonal rifling, etc. I already have optics, so that wouldnt be necessary. Price range I'm looking for, depending on the specs/accessories is anywhere up to $650 or so. Used is okay too (as long as price is adjusted properly :) )

If you're looking to sell, let me know. I'm definitely not in a rush but am toying with the idea at this point. Just wanna see what happens.

Location: Roseville/Sacramento

Thanks.

darkknight
04-28-2010, 8:30 PM
http://yankeehillmachine.com/store/product566.html

i could get you an upper like that but its only 1-10.

cost would be 850

goodlookin1
04-28-2010, 8:41 PM
http://yankeehillmachine.com/store/product566.html

i could get you an upper like that but its only 1-10.

cost would be 850

Nice looking upper.....looks a LOT like my CMMG! (Same gas block and rail). I'm looking for something a bit less expensive though....probably should have mentioned that. I'll go back and add a price range.

Thanks.

goodlookin1
04-29-2010, 12:45 PM
ttt

ParallaxTactical.com
04-29-2010, 4:05 PM
http://www.parallaxtactical.com/store/16-rra-6-8-spc-a4-mid-length-complete-upper-450.html

A little different than what you're looking for (1 in 10 twist), but a steal at $475. We also sell 6.8 magazines, and have some pretty spiffy foreends that would fit it.

goodlookin1
04-30-2010, 7:58 AM
http://www.parallaxtactical.com/store/16-rra-6-8-spc-a4-mid-length-complete-upper-450.html

A little different than what you're looking for (1 in 10 twist), but a steal at $475. We also sell 6.8 magazines, and have some pretty spiffy foreends that would fit it.

Is it an SPC II chamber? I'm really down on the 1-11"+ twist rates being that you cannot load heavier bullets in 6.8 with the max given OAL. But I'm lovin that price ;)

Thanks for the info.

ParallaxTactical.com
05-01-2010, 4:34 PM
Yep, they're SPC II; but keep in mind that's only really necessary if you'll be shooting hot loads (eg Silver State Armory).




http://rockriverarms.com/images/products/uh68mid10.gif