PDA

View Full Version : Mossberg 500 Extraction Problem?


joel1316
02-27-2006, 12:58 PM
My Mossberg 500 has always had a problem with extracting a spent case from the chamber? It seems as if the extractor fails to grab onto the case rim to pull the case out of the chamber. I have to take a small flat head screwdriver to pull out the spent case. The problem is pretty consistant with all brands of ammo. Any help would be appreciated.

LOW2000
02-27-2006, 1:46 PM
I've never had that problem. If its been that way since you got it, maybe the spring that came in it was no good or out of spec.

kobra
03-01-2006, 9:43 PM
check your extractor spring in the bolt? Common problems with HK MP5 9mm FTE ( failure to eject)

joel1316
03-02-2006, 8:27 AM
Had that suggested to me in another forum (extractor spring). Thanks I'll order one and find out. Thanks!

taloft
03-02-2006, 4:10 PM
Please let us know if a new spring fixes your problem.

triaged
03-02-2006, 6:17 PM
A friend of mines 500 has done that a few times. I haven't had any time to look at it to see what is wrong with it yet.