View Full Version : Swedish Mauser FS/WTT C&R
03-01-2010, 5:07 PM
I have a sporterized Swedish Mauser with a Boyds Walnut stock and Leupold bases and rings I am asking 350, or 450 with 93 pieces of brass (73 Norma twice fired, once fired 20 federal all sized and primed) and RCBS full length 2 die set.
Redding Area Built by Husqvarna 1942. I will ship.
03-01-2010, 5:13 PM
03-02-2010, 5:17 PM
Will also entertain trades, I dont have anything in mind, let me know what you have.
03-03-2010, 7:13 PM
03-03-2010, 11:05 PM
wow, i have an original so i can't really mount a scope on it. how did you get all that stuff on there? the stock, rings, and where did you get the bent bolt?
03-04-2010, 4:44 PM
Well Boyds sells an RIA stock for the small ring Mauser, Leupold sells the bases for it also. Then I took into a gunsmith and had him drill and tap it for the bases, modify the bold so it would clear the scope, cut off the end of the barrel and re-crown it. This also an m38 so the bolt comes bent already.
03-04-2010, 7:10 PM
<<Removed - this is NOT a discussion forum. Go to the C&R forum for that. -jmlivingston>>
To the OP, is this a 6.5mm cal. on the original barrel?
03-04-2010, 7:17 PM
Yes it is The Swedish 6.5x55 barrel.
03-05-2010, 4:42 PM
Did Maraviov do the work? How does the rifle shoot now?
03-07-2010, 1:10 PM
I dont know who Maraviov is. I took it to an old gun Smith here in the Redding area that we do some work for at our shop. I had worked up some loads for it but they got all jumbled up on the way to the range. Even with that The groups averaged an inch at 100 yds.
03-08-2010, 5:17 PM
BTT I will be in the SAC area Tomorrow
03-10-2010, 4:39 PM
Back to the top
03-11-2010, 4:38 PM
I will be in Sacramento tomorrow again.
vBulletin® v3.8.9, Copyright ©2000-2016, vBulletin Solutions, Inc.