View Full Version : Rem 1100 barrel, 26" Vent rib, steel shot

02-28-2010, 4:38 PM
The barrel is a 26" Vent rib, has interchangeable Rem chokes.

Full choke tude is included. Has one gas port hole (I have seen some older 1100 barrels with 2 holes)

2 3/4" or 3" chamber, made for steel shot. Its blued, only has about 15 rds down the barrel. Looking to get $125 obo, new it is listed at $225

Prefer local sale, but will ship for an extra $10 anywhere in the lower 48

03-01-2010, 6:01 PM
Back to the top... make offers!

03-02-2010, 6:00 AM
pm sent

03-02-2010, 10:40 AM
post a pic

03-02-2010, 8:29 PM
Will get pics tomorrow after work.

Just an FYI, a few people have asked. This barrel is labeled for 2 3/4 magnum and 3" magnum. It has only had 2 3/4" #4 steel through it, and worked fine. I don't believe they were magnum loads.

03-04-2010, 3:43 PM
Sorry for the delay, will get pics to interested parties asap.

Out of town for one more day for work.

03-05-2010, 3:35 PM
2 3/4 lead only..3" steel for 2 3/4 guns? If so I would be interested..

03-13-2010, 1:06 PM
I cant for the life of me get the images to upload anywhere on the web...

If you want pics please send a PM and I can email them to you.

Just to clarify... the barrel will accept 2 3/4" or 3" shells. I don't believe an 1100 designed only for 2 3/4" would be able to handle the 3" shells with this barrel. I believe the length of the receiver on a magnum 1100 (accepts 2 3/4 or 3) is longer.

I do know this barrel fits and functions on a 2 3/4" only Remington 1100, using 2 3/4" shells of course.

03-13-2010, 1:36 PM
Is this 12gauge or 20gauge?

03-14-2010, 3:40 PM
Does it say "*12GA for 2 3/4" Magnum or 3IN Magnum shells-steel shot" on the left side of barrel?
Sorry for all the questions..

03-16-2010, 4:13 PM
12 gauge

and yes it says "*12GA for 2 3/4" Magnum or 3IN Magnum shells-steel shot"

But its sold to Nate.