PDA

View Full Version : Lets see your .223 California Legal Self Loading Rifle!


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [29] 30

tomd1584
01-22-2013, 7:40 PM
whats a 1x magnifier? why the 45* irons with a red dot? seems.....not necessary.

pic thread:

http://i737.photobucket.com/albums/xx14/TD236/7cb6e22fde566c0e215c8ceebe3879ea-1_zps119519ad.jpg

air0n'03
01-25-2013, 2:32 AM
YHM Rail
http://i49.tinypic.com/io1y8p.jpg

Troy VTAC Alpha Rail
http://i48.tinypic.com/1jncls.jpg

God I love that rail.. haha. Anyone know where I can find a good price on a tape switch for the Surefire Scout?

Aftermath686
01-31-2013, 2:02 PM
Been a while. Mine is the candy-cain in the middle.

http://pic100.picturetrail.com/VOL1137/3895841/20497349/405482600.jpg

kick Z tail out
02-01-2013, 8:00 PM
http://farm9.staticflickr.com/8358/8436374827_ee799b1864_o.jpg

CityHunt3r
02-01-2013, 8:10 PM
Pwned

kick Z tail out
02-01-2013, 8:37 PM
Very nice, composition and hardware. :cool2:

sdsguy87
02-02-2013, 2:48 PM
http://farm9.staticflickr.com/8503/8439742350_eedbd1c4f3_n.jpg (http://www.flickr.com/photos/sdsguy/8439742350/)

Just finished up my first AR15.
FNH 16" 1:7 Chrome lined barrel
TDS Guns Muzzle Break
Troy Industries handguard and low profile gas block
Magpul ACS-L, MIIAD grip, VFG, and front/rear MBUS
RRA LPK
Young Hard chrome skeletonized BCG
Dez Arms upper
80% lower
Now, I just need ammo. The only parts I bought online were the barrel, LPK, and lower. Everything else was at TDS Guns and those guys are awesome!!!

Pistols below, SIG P229 Enhanced .40 and a Rock Island Armory 1911 GI.

khorat77
02-03-2013, 12:34 PM
DTI - lower and upper
Magpul - pistol grip, handguard, and stock
Pentax - scope
Dont know the make of the fore grip/bipod

komishe
02-04-2013, 10:58 PM
if only I could take a bit more off the front...........:facepalm:
Stag upper match barrel with a Noveske kx3,pinned and welded @ 16.1"
AFM:confused:lower with Rock river national match trigger
seekins 13" BAR free floater
aimpoint comp m3 2moa dot w/ larue qd
Magpul-moe grip,afg,mbus,blocked and pinned Pmag, and a ctr stock with LaRue RISR
Cerakoted in Magpul FDE and graphite black in my garage

Just foolin' around with some receiver parts I didn't care too much for. I wanted to try for an SBR "look", since I can't have a real one.
I cut and crowned the barrel with my friends tools and had a local machinist thread it. I blind pinned it and gave all the metal parts a cerakote suit.
She actually handles o.k. despite the big pig on front and the heavy barrel(still shoots good too:D)
That wasn't the point of this build anyways. I have nice handling AR's. I just wanted to make something enjoyable and amusing out of parts that I didn't care for at all before.
It was a lot of fun building, and IMO, was well worth it.

http://www.upitall.com/Private/u/448/855/11129

NANDO1911
02-08-2013, 11:40 AM
Here's mine,

http://i86.photobucket.com/albums/k120/sgtfl2/photo_zps7cb77636.jpg

bsumoba
02-09-2013, 12:29 PM
She self-loads, she protects, she makes me feel all warm and fuzzy inside.

Larue PredatAR 5.56 - 18"
Vortex PST 1-4x on a LT-104 QD mount

http://i1253.photobucket.com/albums/hh586/Bryan_Sumoba/67d10247-1853-4925-a11b-118b9a65ec08_zps91294500.jpg

hrazor23
02-09-2013, 12:39 PM
This is mine

Sent from my SPH-L900 using JellyBombed Tapatalk 2

norcal240
02-09-2013, 1:58 PM
http://i24.photobucket.com/albums/c11/jose5170/DSC_0101_2_3_tonemapped_zps3534268c.jpg

Bob229
02-10-2013, 2:37 PM
New Frontier Polymer Lower
DPMS Upper
Magpul Hand Guard and Grips
UTG Red Dot

This was my first AR build so I kept it simple. I was skeptical about the polymer lower at first but there are over 1000 rounds through the rifle with no problems. Tight groups at 100 yards. Great for a range gun or an afternoon shooting with friends.

203264

Thedarkgander
02-11-2013, 5:36 PM
Stag lower, WOA 18" Varmint 1-7 Upper - Fluted, Harris Bipod, magpul Pmag 10 round, Sightron 3-9x40

Future upgrades: Trigger (Geiselle?), Magpul PRS, better scope, ???.

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/59440_604071589622487_83334361_n.jpg

Ten shot group - Those 3 were all my error:
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/222729_654413831254929_2113351251_n.jpg

Suggestions welcome

tomd1584
02-15-2013, 7:20 PM
http://i737.photobucket.com/albums/xx14/TD236/image-2_zpsc122ea01.jpeg

supporter2a
02-17-2013, 9:02 PM
nice ar's i noticed that some have afg and vfg, i didnt think those were allowed in our wonderful state, are they legal? i wanna add one.

core8404
02-17-2013, 9:21 PM
223/5,56 topped with Zeiss (conquest 1000) - nothing less than an HD glass.

762.DEFENSE
02-17-2013, 9:26 PM
nice ar's i noticed that some have afg and vfg, i didnt think those were allowed in our wonderful state, are they legal? i wanna add one.

Yes they're legal on a RAW/ BB'ed rifle. Featureless rifles can not have the VFG, and the AFG on a featureless build is still undecided-but advised against.

Thedarkgander
02-17-2013, 9:39 PM
223/5,56 topped with Zeiss (conquest 1000) - nothing less than an HD glass.

Beautiful rifle. Jealous, I want that glass and stock!

supporter2a
02-17-2013, 10:11 PM
Yes they're legal on a RAW/ BB'ed rifle. Featureless rifles can not have the VFG, and the AFG on a featureless build is still undecided-but advised against.

excuse my ignorance here, but what do you mean by RAW/BB?

lilro
02-18-2013, 1:10 AM
excuse my ignorance here, but what do you mean by RAW/BB?

Registered Assault Weapon, or a rifle with a Bullet Button.

AceHound
02-19-2013, 10:24 PM
http://i1274.photobucket.com/albums/y436/lasd13/DSC00062_zpsb2099a86.jpg

tap4154
02-22-2013, 7:42 PM
Just got this together today... using a YHM stripped lower, BB, 5-20 round mag, RRA LPK with Hogue grip, and the upper/stock/buffer/assembly from my late Dad's old Colt HBAR 20", I now have a CA compliant AR!

http://i203.photobucket.com/albums/aa252/TomHB_2007/ARLeft5-20_zpsd5414b67.jpg
http://i203.photobucket.com/albums/aa252/TomHB_2007/ARRight5-20_zps6d138779.jpg
http://i203.photobucket.com/albums/aa252/TomHB_2007/ARFull5-20_zps0e5c235e.jpg

DJW
02-22-2013, 8:04 PM
tap4154 I like it man. I like to look of that colt upper on there. Retro looks good.

tap4154
02-23-2013, 6:29 AM
tap4154 I like it man. I like to look of that colt upper on there. Retro looks good.

Thanks. I like it a lot, and am glad to finally get it put together. I just changed the pics; now has a 5-20 mag in it. The 10 round mag was hanging up the bolt on occasion. Bought the mag on Ebay, and the lip and mag catch slot don't match up quite right to the factory mags, so am sending it back.

deviljon
02-23-2013, 7:53 AM
tap4154 I like it man. I like to look of that colt upper on there. Retro looks good.

+1 for retro upper. I would love to build one myself someday.

tap4154
02-23-2013, 7:26 PM
Well, the new 10 round mag wasn't the problem. It was a sloppy fit between the upper and lower.

I hadn't yet glued in the offset bushing to adapt the new YHM lower to the old Colt HBAR upper, which has a larger front pivot hole. I did that today with the bushing rotated to provide the best fit, then took apart and cleaned the bolt assembly as well, and now the upper and lower fit nice and tight like one unit, and the new 10 round mag is fine... no hang ups :D

http://i203.photobucket.com/albums/aa252/TomHB_2007/ColtAR10Rd_zps8dc5964e.jpg

Eikbyrnir
02-26-2013, 11:53 AM
Not sure if I got this attachment right from my phone. If so, this is my first build I finished yesterday.

Specs:
LRB Lower with M&A LPK
Rock River upper with BCM Bolt 16" Stainless
Guntech front rail
Magpul MOE forward grip, rear sight and stock
Ergo pistol grip

Couldn't find an OD rear sight so just went with the FDE for now, I'm pretty happy with her.

Her little sister is a 226 .40 Cal.

The rifle shot amazingly well, was plinking a 3x3 plate at 200 yards with no glass. I'm proud. :D

Just-in
02-26-2013, 5:55 PM
Not sure if I got this attachment right from my phone. If so, this is my first build I finished yesterday.

Specs:
LRB Lower with M&A LPK
Rock River upper with BCM Bolt 16" Stainless
Guntech front rail
Magpul MOE forward grip, rear sight and stock
Ergo pistol grip

Couldn't find an OD rear sight so just went with the FDE for now, I'm pretty happy with her.

Her little sister is a 226 .40 Cal.

The rifle shot amazingly well, was plinking a 3x3 plate at 200 yards with no glass. I'm proud. :D

http://www.calguns.net/calgunforum/attachment.php?attachmentid=208869&d=1361912118

kick Z tail out
03-03-2013, 3:34 PM
That's funny, I just did a similar one then saw yours. Doh.

http://farm9.staticflickr.com/8238/8525556739_7679134e4b_o.jpg

dbode
03-04-2013, 1:47 PM
here are a couple of mine.

http://i652.photobucket.com/albums/uu243/danrb1974/IMAG0178.jpg

jgraham15
03-04-2013, 2:53 PM
Imoprtant note for those using photobucket to host pictures!


Make sure you make your albums private in your photobucket accounts. I'm noticing lately that people aren't doing this and when I get the email that this thread has been replied to it gives a link to the picture in your photobucket account which allows anyone to look at every picture you have in your photobucket account.

I don't know about you but I don't want people having access to every picture in my photobucket account.

snorky
03-04-2013, 3:59 PM
BCM 16" 1:7 twist mid-length
New Frontier Armory LW-15 complete lower
BCM FA bolt carrier group
BCM Gunfighter Mod4 charging handle
Yankee Hill Machine 5C2 Phantom flash hider
Samson Evolution 12.37" handguard
ErgoSure grip
Magpul MS2 sling
Magpul ASAP sling plate
Magpul RVG
Troy Hk Folding Battle Sights

http://farm9.staticflickr.com/8526/8528676099_839d2dd55f_b.jpg

http://farm9.staticflickr.com/8373/8529786854_6fa7664586_b.jpg

http://farm9.staticflickr.com/8232/8529786682_55cbda0871_b.jpg

JohnnyRooks
03-07-2013, 6:53 PM
Afghan John (In memory of John Noveske)

Cerakoated with Metallic Gray


http://farm9.staticflickr.com/8242/8536134968_6e38694114_b.jpg

ExtremeX
03-07-2013, 7:27 PM
Afghan John (In memory of John Noveske)

Cerakoated with Metallic Gray


http://farm9.staticflickr.com/8242/8536134968_6e38694114_b.jpg

I very much like that Metallic Gray...

Great looking rifle.

JohnnyRooks
03-08-2013, 3:19 AM
I very much like that Metallic Gray...

Great looking rifle.

thanks bro.. here's the full Rifle..

Afghan John

http://farm9.staticflickr.com/8518/8536192760_ab89aed580_b.jpg

ExtremeX
03-08-2013, 11:20 AM
I would really love to do a Cerakote project one of these days…

Did you have to use blast media to take the anodizing off of the aluminum or do you just paint and bake right over it?

JohnnyRooks
03-08-2013, 5:22 PM
I would really love to do a Cerakote project one of these days…

Did you have to use blast media to take the anodizing off of the aluminum or do you just paint and bake right over it?

i have www.sacguns.com did the cerakote for me.. :D


don't judge me.. i love salmon color.. :eek:

http://farm9.staticflickr.com/8111/8536161048_19e243598f_b.jpg

Arteel
03-08-2013, 5:38 PM
http://i51.photobucket.com/albums/f362/DC2Projektz/IMG_1298.jpg

henmar77
03-08-2013, 5:53 PM
http://i143.photobucket.com/albums/r153/henmar77/ar15223_zpsb96785d4.jpg

JohnnyRooks
03-09-2013, 6:27 AM
love the chainsaw Arteel..

COLORS..

http://farm9.staticflickr.com/8108/8538759622_6ca5570d38_b.jpg

JohnnyRooks
03-09-2013, 6:30 AM
Per request of some members..

Project not complete yet.. wife wanted to pink snake skin the pistol grip and stock.. :eek:


http://farm9.staticflickr.com/8373/8537542847_96bcdfd309_b.jpg

Arteel
03-09-2013, 7:13 PM
Thank you, Sir. Nice sticks yourself!

love the chainsaw Arteel..

Rough Gear Review
03-10-2013, 3:38 AM
http://i1283.photobucket.com/albums/a549/RoughGearReview/037_zps91568059.jpg

http://i1283.photobucket.com/albums/a549/RoughGearReview/026_zps8be11f0f.jpg

http://i1283.photobucket.com/albums/a549/RoughGearReview/004_zps11bfea05.jpg

JohnnyRooks
03-12-2013, 4:20 AM
http://farm9.staticflickr.com/8112/8544206604_e1a32fbc91_b.jpg

JohnnyRooks
03-13-2013, 8:28 PM
http://farm9.staticflickr.com/8088/8474285929_ea45f51b37_b.jpg

peacedivision
03-13-2013, 9:03 PM
Very nice!

JohnnyRooks
03-15-2013, 4:37 AM
Very nice!

thanks... :D




http://farm9.staticflickr.com/8085/8538742604_54a7d4afe4_b.jpg

deviljon
03-15-2013, 5:58 AM
http://farm9.staticflickr.com/8088/8474285929_ea45f51b37_b.jpg

That ACOG! ;)

P7Collector
03-16-2013, 2:04 PM
My newest build:D

http://i10.photobucket.com/albums/a137/g6t6o/ffb38806-2c79-44ef-8868-3b95e25411e6_zps36ff9c0b.jpg

BomarFab
03-19-2013, 3:10 PM
Lower:
-PSA Lower and LPK without FCG
-ALG ACT Trigger
-Spikes Trigger Guard
-BCM Mod 0 Grip
-Fortis End Plate
-B.A.D. A.S.S. Ambi Safety
-Bullet Button
-Buffer assembly from JoeBob, made in USA
-Magpul MOE

Upper:
-RRA stripped upper
-BCM barrel nut, delta ring, and gas tube
-Spikes lightweight 14.5" mid length barrel, had a FSB and brake pinned on to make overall length 16.1"
-Magpul Mid Length Hand Guard
-Rainier Arms Raptor Charging Handle
-Rainier Arms BUIS
-Brake that I made

http://i.imgur.com/LSTuWZzh.jpg
http://i.imgur.com/cDj8nTJh.jpg

619dartfrog
03-19-2013, 8:35 PM
first build:D

http://http://i550.photobucket.com/albums/ii438/dagallegos1/ar15build1.jpg
http://http://i550.photobucket.com/albums/ii438/dagallegos1/ar15build2.jpg

MRH
03-19-2013, 9:16 PM
first build:D

http://http://i550.photobucket.com/albums/ii438/dagallegos1/ar15build1.jpg
http://http://i550.photobucket.com/albums/ii438/dagallegos1/ar15build2.jpg

Nice! Specs?

CRTguns
03-19-2013, 10:21 PM
Lower:
-PSA Lower and LPK without FCG
-ALG ACT Trigger
-Spikes Trigger Guard
-BCM Mod 0 Grip
-Fortis End Plate
-B.A.D. A.S.S. Ambi Safety
-Bullet Button
-Buffer assembly from JoeBob, made in USA
-Magpul MOE

Upper:
-RRA stripped upper
-BCM barrel nut, delta ring, and gas tube
-Spikes lightweight 14.5" mid length barrel, had a FSB and brake pinned on to make overall length 16.1"
-Magpul Mid Length Hand Guard
-Rainier Arms Raptor Charging Handle
-Rainier Arms BUIS
-Brake that I made

http://i.imgur.com/cDj8nTJh.jpg

Closeup of the brake!

619dartfrog
03-20-2013, 6:46 AM
Lower
Seekins precision lower
Spikes lpk
3lb timney skeletonized trigger
FAB pistol grip
Magpul CTR stock
Kns anti walk pins
Punisher takedown pins

Upper
Vltor mur1 upper
BCM BCG
Raptor charging handle
Midwest 12" rail
DD muzzle break
JD 1:8 barrel
Eotech 517
Magpul flip up sights
Tango down foregrip

TJB0341
03-20-2013, 7:25 AM
http://i1292.photobucket.com/albums/b566/tjbryant0341/DSC_0540_zps21899ce6.jpg
PSA 16" barrel length 5.56 Nato.
12" Midwest Industries SSG2 Free Float Rail
Magpul MOE grip, trigger guard and stock
Magpul XTM Handstop
Magpul Pmag
A.R.M.S. BUIS
Aim point Comp ML2 w/ A.R.M.S. QD Mount
JP Recoil Eliminator muzzle brake

BomarFab
03-20-2013, 9:17 AM
Let's see if I can post the brake pictures from my phone.

http://i.imgur.com/domtyE2h.jpg
http://i.imgur.com/RPgAugOh.jpg

BomarFab
03-20-2013, 9:18 AM
Nope.. just use this link for all the pics.
http://imgur.com/a/dVMsJ

CRTguns
03-20-2013, 8:58 PM
Ahhh... I see what you did there. 2 piece eh?

CH33S3
03-21-2013, 8:00 AM
Way sick.

CH33S3
03-21-2013, 8:18 AM
i have www.sacguns.com did the cerakote for me.. :D


don't judge me.. i love salmon color.. :eek:

http://farm9.staticflickr.com/8111/8536161048_19e243598f_b.jpg

How much did they charge to do one rifle?

BomarFab
03-21-2013, 9:01 AM
Ahhh... I see what you did there. 2 piece eh?

Yes, this is how it started.
http://i.imgur.com/mw8yejVh.jpg
http://i.imgur.com/carUtXNh.jpg
http://i.imgur.com/B9iIufOh.jpg
http://i.imgur.com/801vxhZh.jpg

danian18
03-21-2013, 2:56 PM
http://img.tapatalk.com/d/13/03/26/hyhemepu.jpghttp://img.tapatalk.com/d/13/03/26/upu3ehu9.jpg

ky2970
03-21-2013, 11:06 PM
What kind of brake/ Compensator is that Vader?

Juggerbrake.

if only I could take a bit more off the front...........:facepalm:
Stag upper match barrel with a Noveske kx3,pinned and welded @ 16.1"
AFM:confused:lower with Rock river national match trigger
seekins 13" BAR free floater
aimpoint comp m3 2moa dot w/ larue qd
Magpul-moe grip,afg,mbus,blocked and pinned Pmag, and a ctr stock with LaRue RISR
Cerakoted in Magpul FDE and graphite black in my garage

Just foolin' around with some receiver parts I didn't care too much for. I wanted to try for an SBR "look", since I can't have a real one.
I cut and crowned the barrel with my friends tools and had a local machinist thread it. I blind pinned it and gave all the metal parts a cerakote suit.
She actually handles o.k. despite the big pig on front and the heavy barrel(still shoots good too:D)
That wasn't the point of this build anyways. I have nice handling AR's. I just wanted to make something enjoyable and amusing out of parts that I didn't care for at all before.
It was a lot of fun building, and IMO, was well worth it.

http://www.upitall.com/Private/u/448/855/11129

That is an awesome rifle. Reverse color ARs look the best in IMO. I like how the color really brings out the lines especially on your ST rail. :thumbsup:

starsnuffer
03-23-2013, 1:10 PM
http://farm9.staticflickr.com/8231/8533546348_1227782ccc_c.jpg (http://www.flickr.com/photos/93630714@N03/8533546348/)
Untitled (http://www.flickr.com/photos/93630714@N03/8533546348/) by Starsnuffer (http://www.flickr.com/people/93630714@N03/), on Flickr
http://farm9.staticflickr.com/8246/8514530422_19a9a78c66_c.jpg (http://www.flickr.com/photos/93630714@N03/8514530422/)
Untitled (http://www.flickr.com/photos/93630714@N03/8514530422/) by Starsnuffer (http://www.flickr.com/people/93630714@N03/), on Flickr
http://farm9.staticflickr.com/8391/8513416657_0592a1af2e_c.jpg (http://www.flickr.com/photos/93630714@N03/8513416657/)
Untitled (http://www.flickr.com/photos/93630714@N03/8513416657/) by Starsnuffer (http://www.flickr.com/people/93630714@N03/), on Flickr
http://farm9.staticflickr.com/8108/8513413539_21db470b3a_c.jpg (http://www.flickr.com/photos/93630714@N03/8513413539/)
Untitled (http://www.flickr.com/photos/93630714@N03/8513413539/) by Starsnuffer (http://www.flickr.com/people/93630714@N03/), on Flickr
http://farm9.staticflickr.com/8225/8514520642_3cfd41f2ed_c.jpg (http://www.flickr.com/photos/93630714@N03/8514520642/)
Untitled (http://www.flickr.com/photos/93630714@N03/8514520642/) by Starsnuffer (http://www.flickr.com/people/93630714@N03/), on Flickr

Barrel cut to 14.5 reprofiled and melonited by IGF. Lighter then my 14.5 DI AR.

-W

JohnnyRooks
03-26-2013, 7:52 PM
She is now complete.. :)


http://farm9.staticflickr.com/8225/8594540408_f9c2639c93_b.jpg

loekanle
03-26-2013, 8:15 PM
Note to self must post here

rdunaway62
04-01-2013, 1:29 PM
She is now complete.. :)


http://farm9.staticflickr.com/8225/8594540408_f9c2639c93_b.jpg

My wife love this rifle and is wondering why I haven't made hers pink yet. :facepalm:

Guitarmoto
04-01-2013, 9:01 PM
thanks.. bro..:D


Cerakoated M&P

http://farm9.staticflickr.com/8066/8195226962_273fb0d167_b.jpg

Purdy.....

Ar_Glock_Man
04-02-2013, 5:49 PM
221164

motox917
04-02-2013, 10:57 PM
My first build

http://img.photobucket.com/albums/v345/TeamPDC/AR15/AR15-01_zps7dc92e8c.jpg

What brand is that muzzle brake?

briguy64
04-02-2013, 11:24 PM
221164

There is a whole lot of "evil" in that picture.

Sweet ARs!

SJ Mosin
04-02-2013, 11:29 PM
My first AR almost done. I'm just waiting on a buffer tube :facepalm:

https://lh4.googleusercontent.com/-QYGCyKyOi2U/UVvZq7JVfII/AAAAAAAADdM/rFvGi_o9rgc/s729/IMG_20130402_214701.jpg

https://lh4.googleusercontent.com/-o2TjYsOrf-0/UVvZstxM-2I/AAAAAAAADdU/7R6oz82J9FY/s729/IMG_20130402_214634.jpg

https://lh5.googleusercontent.com/-VMmZdDjWZa0/UVvalJ67YEI/AAAAAAAADdg/89W4pIY-wQc/s729/IMG_20130328_144646.jpg

lilro
04-02-2013, 11:35 PM
My first AR almost done. I'm just waiting on a buffer tube :facepalm:

https://lh4.googleusercontent.com/-QYGCyKyOi2U/UVvZq7JVfII/AAAAAAAADdM/rFvGi_o9rgc/s729/IMG_20130402_214701.jpg

Don't you also need a rear sight/optic?

SJ Mosin
04-02-2013, 11:38 PM
Oh yea, that would be nice to. I have a Troy Battle sight in FDE on the way

SJ Mosin
04-03-2013, 3:21 PM
Much better now :D

https://lh5.googleusercontent.com/-J_zKFXCCODw/UVy4_MBxmHI/AAAAAAAADdw/0fs1Uzz3KxU/s645/IMG_20130403_130142.jpg

https://lh4.googleusercontent.com/-HR53qr5ierU/UVy5ASBdDNI/AAAAAAAADd4/TGv6tt-MoQI/s645/IMG_20130403_130129.jpg

hks619
04-03-2013, 6:42 PM
i have www.sacguns.com did the cerakote for me.. :D


don't judge me.. i love salmon color.. :eek:




thing looks awesome! how much did/do they charge?

SJ Mosin
04-03-2013, 8:11 PM
My stock? It comes FDE.

http://store.magpul.com/product/MAG404/60

danian18
04-03-2013, 9:09 PM
http://img.tapatalk.com/d/13/04/05/buja3ehy.jpg

henmar77
04-03-2013, 9:11 PM
http://img.tapatalk.com/d/13/04/04/ugaje4u7.jpg

only thing missing is the kitchen sink.

Dumas1012
04-15-2013, 3:22 PM
only thing missing is the kitchen sink.

I've seen worst but your comment made me lol'd.

G21Shooter
04-15-2013, 5:11 PM
only thing missing is the kitchen sink.

Common now nothing wrong with having a red dot+magnifier(one of the best optic setups for a short-medium range AR) and a flashlight. A laser is a little mall ninja.

Not everyone is a AR hipster with a KISS rifle...

AvgJoe1292
04-16-2013, 3:41 PM
http://imageshack.us/a/img10/2095/dsc00145cc.jpg

glenn.ma
04-17-2013, 11:26 AM
My COLT LE6940CA

http://i1296.photobucket.com/albums/ag10/glenn_ma/COLTregLE6940CA1_zps22b86d8e.jpg (http://s1296.photobucket.com/user/glenn_ma/media/COLTregLE6940CA1_zps22b86d8e.jpg.html)

http://i1296.photobucket.com/albums/ag10/glenn_ma/COLTregLE6940CA2_zps06ba30c5.jpg (http://s1296.photobucket.com/user/glenn_ma/media/COLTregLE6940CA2_zps06ba30c5.jpg.html)

NickTheGreek
04-19-2013, 8:00 AM
6.8 SPC Build
CMT Tactical Lower
Spikes Upper
Midwest Industries Gen2 SS 12" Handguard
BCM BCG
E.R. Shaw 16" barrel
http://i.imgur.com/OD2y06al.jpg
http://i.imgur.com/2KlIKLql.jpg

S&W M&P15-Tactical
http://i.imgur.com/1ZMMw6Nl.jpg

Germz
04-20-2013, 7:36 PM
That's funny, I just did a similar one then saw yours. Doh.

http://farm9.staticflickr.com/8238/8525556739_7679134e4b_o.jpg

My only issue with this setup is that you put something, and by something I mean everything in the picture, ontop of an American Flag...

NickTheGreek
04-21-2013, 8:05 AM
My only issue with this setup is that you put something, and by something I mean everything in the picture, ontop of an American Flag...

I get where you are coming from, but I feel the OP did it in a respectful way. There are a lot of laws regarding the handling of the American flag and they are almost all pertaining to respecting the flag and respecting what it stands for. I think his subtle message was to imply his firearms are his way of protecting what the flag stands for. :shrug:

G21Shooter
04-21-2013, 2:01 PM
My only issue with this setup is that you put something, and by something I mean everything in the picture, ontop of an American Flag...

I cannot think of anything better to put on top of a American flag than tools of freedom!

Panda48264
04-21-2013, 4:29 PM
My AR-15 the day I was able to bring it home from Straightline Tactical.
Riflegear Aggressor
http://img.photobucket.com/albums/v396/kaihuang/misc%20pics/Guns/CIMG0990.jpg

How it looks today.
http://img.photobucket.com/albums/v396/kaihuang/misc%20pics/Guns/CIMG1417.jpg
http://img.photobucket.com/albums/v396/kaihuang/misc%20pics/Guns/CIMG1418.jpg
http://img.photobucket.com/albums/v396/kaihuang/misc%20pics/Guns/CIMG1424.jpg

And the build I did for a friend of mine (upper built by another CG member).
http://img.photobucket.com/albums/v396/kaihuang/misc%20pics/Guns/CIMG1253.jpg

Sheperd80
04-23-2013, 7:32 PM
227102
227103

Just got it today and dressed it all up. Off to sight-in tomorrow.

Smith & Wesson M&P 15 OR
Magpul MOE Handguard
Magpul STR Stock
Magpul MIAD Grip
Burris MTAC 1-4x Scope
Burris Fastfire III RDS
Burris PEPR mount

Planning to put that sexy Diamondhead VRS handguard and a Surefire on it eventually.

Germz
04-24-2013, 1:01 AM
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/914064_10151209284812824_204709116_o.jpg

LOWER RECEIVER
Forged 80% lower: FREE ($65 to Ares Armor to mill.)
CMMG lower parts kit: 120
Bullet Button: 25
Comm. carbine buffer and Magpul MOE: 100

UPPER RECEIVER
BCM 16" 1:7 5.56 Upper Receiver: 575
Vltor Mod 3 charging handle: FREE
Southern Guns LLC BCG: 170
Magpul MBUS: 50
Magpul MOE handguard: 50

Grand total: $1,155

ExtremeX
04-24-2013, 1:58 AM
My COLT LE6940CA

http://i1296.photobucket.com/albums/ag10/glenn_ma/COLTregLE6940CA1_zps22b86d8e.jpg (http://s1296.photobucket.com/user/glenn_ma/media/COLTregLE6940CA1_zps22b86d8e.jpg.html)

http://i1296.photobucket.com/albums/ag10/glenn_ma/COLTregLE6940CA2_zps06ba30c5.jpg (http://s1296.photobucket.com/user/glenn_ma/media/COLTregLE6940CA2_zps06ba30c5.jpg.html)

Nice optic... very nice.

BOATS N HOES
04-25-2013, 3:05 PM
I heard the AFG is a no go now??

That true? Can't find anything online but I didn't search very long

Tell me it isn't so

jrau13
04-28-2013, 7:58 AM
New one on the left. Need optics now.

Left:
BCM LW 16" upper, Centurion rail, JD lower, Troy buis
Right:
BCM 16" upper, Magpul furniture, CalGuns lower, Matech buis

http://farm9.staticflickr.com/8521/8689644440_3fef919c83_c.jpg (http://www.flickr.com/photos/25957700@N08/8689644440/)
My rifles (http://www.flickr.com/photos/25957700@N08/8689644440/) by jrau13 (http://www.flickr.com/people/25957700@N08/), on Flickr

BigPimping
04-28-2013, 1:35 PM
221164


Wow......seething with jealousy. Wife would never tolerate that kind of a stash.

shooperman
04-28-2013, 1:44 PM
I heard the AFG is a no go now??

That true? Can't find anything online but I didn't search very long

Tell me it isn't so

Where in the world did you hear that?

equinoxx
04-29-2013, 8:10 PM
First build, first AR :)

Lower:
JD Machine stripped lower
Core15 lpk
Spikes Tactical buffer tube kit
Magpul STR

Upper:
VLTOR MUR-1S upper
AR Stoner ceramic BCG
Rainier Select MEDCON 14.5" barrel (1:8 twist)
BCM lo-pro gas block and mid-length gas system
Charging handle with Badger Tac-Latch
Noveske KX3
Midwest Industries SS-Series free float hand guard (15" in length)

https://dl.dropboxusercontent.com/u/28838851/ar2.jpg

NevadaSwimmer
05-01-2013, 9:42 AM
http://i1365.photobucket.com/albums/r751/NevadaSwimmer/2013-04-14_19-15-40_78_zps415cd539.jpeg (http://s1365.photobucket.com/user/NevadaSwimmer/media/2013-04-14_19-15-40_78_zps415cd539.jpeg.html)

Finished my build painting it right away so i don't have the urge to baby it, a rifle should be used and abused like any other tool. my dog photobombed.

G21Shooter
05-05-2013, 7:47 PM
Noveske RECON build, just got the 15 inch Troy Alpha rail.

http://i298.photobucket.com/albums/mm245/jcole_08/IMG_0685_zps204aa0ab.jpg

MR.45ACP
05-06-2013, 10:17 AM
here is my ar15
bcm upper
delton lower
magpul ctr buttstock
lucid red dot sight

feel free to follow me on
http://instagram.com/nemesis2763/#

http://i296.photobucket.com/albums/mm186/felon-k20/001.jpg (http://s296.photobucket.com/user/felon-k20/media/001.jpg.html)

johnny boy
05-06-2013, 11:01 AM
230478

empirion21
05-09-2013, 6:14 PM
18" DEZ Arms 5.56 Upper:

- Palmetto state armory BCG
- 1 in 9 R.H. twist
- 6 groove (4150 chrome moly vanadium steel) with M4 feed ramp ext
- Head spaced and parkerized.
- Centurion Arms C4 12 Inch Rail System
- kineti Tech Fake supressor

JD Machines lower with DPMS LPK



http://calidrifttech.com/FS/AR1.jpg

http://calidrifttech.com/FS/AR2.jpg

http://calidrifttech.com/FS/AR3.jpg

http://calidrifttech.com/FS/AR4.jpg

andrewj
05-11-2013, 10:53 PM
http://i7.photobucket.com/albums/y275/MUFFIN25/20130509_191946.jpg

henmar77
05-12-2013, 8:57 AM
http://i7.photobucket.com/albums/y275/MUFFIN25/20130509_191946.jpg

whats on the mag?

NickTheGreek
05-13-2013, 2:11 PM
Not a rifle, but as close to a SBR as I can get in CA.

http://i.imgur.com/mGOuvVVl.jpg

http://i.imgur.com/iXB3pmNl.jpg

http://i.imgur.com/NIZ9Em6l.jpg

CALRaider
05-13-2013, 5:53 PM
18" DEZ Arms 5.56 Upper:

- Palmetto state armory BCG
- 1 in 9 R.H. twist
- 6 groove (4150 chrome moly vanadium steel) with M4 feed ramp ext
- Head spaced and parkerized.
- Centurion Arms C4 12 Inch Rail System
- kineti Tech Fake supressor

JD Machines lower with DPMS LPK



http://calidrifttech.com/FS/AR1.jpg

http://calidrifttech.com/FS/AR2.jpg

http://calidrifttech.com/FS/AR3.jpg

http://calidrifttech.com/FS/AR4.jpg

This is the most ridiculous thing I've ever seen.

CALRaider
05-13-2013, 5:54 PM
whats on the mag?

Probably tape.

coyotebait
05-13-2013, 6:01 PM
18" DEZ Arms 5.56 Upper:

- Palmetto state armory BCG
- 1 in 9 R.H. twist
- 6 groove (4150 chrome moly vanadium steel) with M4 feed ramp ext
- Head spaced and parkerized.
- Centurion Arms C4 12 Inch Rail System
- kineti Tech Fake supressor

JD Machines lower with DPMS LPK



http://calidrifttech.com/FS/AR1.jpg

http://calidrifttech.com/FS/AR2.jpg

http://calidrifttech.com/FS/AR3.jpg

http://calidrifttech.com/FS/AR4.jpg

The muzzle brake reminds me of something that I just can't put my finger on........

Ezekiel2000
05-13-2013, 6:03 PM
The muzzle brake reminds me of something that I just can't put my finger on........

You shouldn't put your finger on it too much or you'll go blind! At the very least get some hairy palms...

henmar77
05-13-2013, 6:07 PM
18" DEZ Arms 5.56 Upper:

- Palmetto state armory BCG
- 1 in 9 R.H. twist
- 6 groove (4150 chrome moly vanadium steel) with M4 feed ramp ext
- Head spaced and parkerized.
- Centurion Arms C4 12 Inch Rail System
- kineti Tech Fake supressor

JD Machines lower with DPMS LPK



http://calidrifttech.com/FS/AR1.jpg

http://calidrifttech.com/FS/AR2.jpg

http://calidrifttech.com/FS/AR3.jpg

http://calidrifttech.com/FS/AR4.jpg

Does that muzzle brake require battery's or vibrate?

andrewj
05-13-2013, 6:16 PM
whats on the mag?

Tape. It has no functional purpose other than helping me differentiate between my USGI mags.

coyotebait
05-13-2013, 6:23 PM
You shouldn't put your finger on it too much or you'll go blind! At the very least get some hairy palms...
Whew, I thought I was going blind because I'm old.

Does that muzzle brake require battery's or vibrate?

Could be solar....gone green?:D

BlairB
05-13-2013, 9:01 PM
http://i835.photobucket.com/albums/zz274/bbergsteinsson/DSCN0270_zps669b0983.jpg (http://s835.photobucket.com/user/bbergsteinsson/media/DSCN0270_zps669b0983.jpg.html)

Heavy_Grinder
05-14-2013, 1:41 PM
18" DEZ Arms 5.56 Upper:

- Palmetto state armory BCG
- 1 in 9 R.H. twist
- 6 groove (4150 chrome moly vanadium steel) with M4 feed ramp ext
- Head spaced and parkerized.
- Centurion Arms C4 12 Inch Rail System
- kineti Tech Fake supressor

JD Machines lower with DPMS LPK



http://calidrifttech.com/FS/AR1.jpg

http://calidrifttech.com/FS/AR2.jpg

http://calidrifttech.com/FS/AR3.jpg

http://calidrifttech.com/FS/AR4.jpg

This is the bizness right here. Tactical scope with winged light and laser and a nice front heavy faux suppresor.

Heavy_Grinder
05-14-2013, 1:43 PM
http://i7.photobucket.com/albums/y275/MUFFIN25/20130509_191946.jpg

Beautiful rifle. Refreshing to see a kiss build here and there.

BenjaminCA
05-16-2013, 5:17 PM
My Addax Dissipator, very fun rifle. Some great looking weapons in this thread.

http://i479.photobucket.com/albums/rr158/BenjaminCA_/IMG_4777_zps3fb71403.jpg (http://s479.photobucket.com/user/BenjaminCA_/media/IMG_4777_zps3fb71403.jpg.html)

http://i479.photobucket.com/albums/rr158/BenjaminCA_/IMG_4775_zps25ce3efc.jpg (http://s479.photobucket.com/user/BenjaminCA_/media/IMG_4775_zps25ce3efc.jpg.html)

http://i479.photobucket.com/albums/rr158/BenjaminCA_/IMG_4782_zps60c51fac.jpg (http://s479.photobucket.com/user/BenjaminCA_/media/IMG_4782_zps60c51fac.jpg.html)

http://i479.photobucket.com/albums/rr158/BenjaminCA_/IMG_4783_zps1654689d.jpg (http://s479.photobucket.com/user/BenjaminCA_/media/IMG_4783_zps1654689d.jpg.html)

xmulisha101
05-17-2013, 1:18 AM
http://i1233.photobucket.com/albums/ff389/xmulisha86/F01D639C-1CCF-4AC3-B67C-5C7B00568A20-1570-00000187F5577CAD_zps761d19d1.jpg

Dumas1012
05-20-2013, 10:03 PM
This is the bizness right here. Tactical scope with winged light and laser and a nice front heavy faux suppresor.

LOL, you guys are so mean. The guy had to change his pictures.

coyotebait
05-21-2013, 4:21 AM
LOL, you guys are so mean. The guy had to change his pictures.

Oh dayum!!!! He did!!! LMAO:facepalm:

Just funnin' bro

empirion21
05-21-2013, 6:48 PM
Oh dayum!!!! He did!!! LMAO:facepalm:

Just funnin' bro



Actually guys it was not the mean comments that made me change out my muzzle brake. I realized that the barrel was not free floating with that suppressor (it was touching the quad rails). I used a 18" barrel just so I can get the maximum range out of the gun without it being too long. So with the setup you see now I was able to hit metal targets at 600 yards out!!. I also ordered a nice Redfield BattleZone 3-9X scope to change out this cheap Barska scope although it was the scope I used to hit the 600yrd targets.

BTW: I didn't take any of those comment personally.... :)

This was my first AR build and I was going for more FLASH than function, but I realized soon enough that will not work.

keep them comment coming!!!!! .... :32:




here is what all the fuzz was about:

http://www.calidrifttech.com/FS/old1.jpg

MKE
05-21-2013, 7:12 PM
http://www.calidrifttech.com/FS/old1.jpg

Holey underwear! That rifle has an RPG upper! Where can I get one and who sells RPG rockets? :D

Dumas1012
05-21-2013, 8:38 PM
If that's the case then...Holy **** batman! Your rifle looks like it belongs in the Star Blazer cartoon!!!! LOL. I like your attitude though. If it makes you feel better I also own fake can, but I call mine a barrel shroud :D

Actually guys it was not the mean comments that made me change out my muzzle brake. I realized that the barrel was not free floating with that suppressor (it was touching the quad rails). I used a 18" barrel just so I can get the maximum range out of the gun without it being too long. So with the setup you see now I was able to hit metal targets at 600 yards out!!. I also ordered a nice Redfield BattleZone 3-9X scope to change out this cheap Barska scope although it was the scope I used to hit the 600yrd targets.

BTW: I didn't take any of those comment personally.... :)

This was my first AR build and I was going for more FLASH than function, but I realized soon enough that will not work.

keep them comment coming!!!!! .... :32:




here is what all the fuzz was about:

http://www.calidrifttech.com/FS/old1.jpg

Deadtargets
05-21-2013, 9:33 PM
^^^its an uncircumcised barrel. :)

CRTguns
05-21-2013, 10:10 PM
Not a rifle, but as close to a SBR as I can get in CA.

http://i.imgur.com/mGOuvVVl.jpg

http://i.imgur.com/iXB3pmNl.jpg

http://i.imgur.com/NIZ9Em6l.jpg

Congrats. You're burning a perfectly good 5.56 round to make .22wmr energy.

henmar77
05-21-2013, 10:12 PM
Congrats. You're burning a perfectly good 5.56 round to make .22wmr energy.

what is the point to an AR pistol anyway? is it just the cool factor?

NickTheGreek
05-22-2013, 7:22 AM
what is the point to an AR pistol anyway? is it just the cool factor?

I built mine for fun. May swap the barrel and bolt and go to 6.8 though. I also regularly bring my rifle with me when upland bird hunting in case I see a hog. Within 50-75yds this thing will drop a hog cold and accurately too. Much lighter than my 8lb bolt-action rifle and it fits in my backpack, so I may end up bringing it with me instead of the trusty Ruger M77.

NickTheGreek
05-22-2013, 7:24 AM
Congrats. You're burning a perfectly good 5.56 round to make .22wmr energy.

Yup, and having a blast doing it.

'MURICA!!

http://d24w6bsrhbeh9d.cloudfront.net/photo/5941554_700b.jpg


Also, FWIW out of a 7.5" barrel, you're still pushing a 65gr bullet 2250 FPS. Compare that to the .22WMR's 30gr @ 2200 FPS or 50GR @ 1600 FPS. I'll take the .223 short barrel any freaking day.


.

empirion21
05-22-2013, 7:44 AM
^^^its an uncircumcised barrel. :)




LOL!....

empirion21
05-22-2013, 7:50 AM
If that's the case then...Holy **** batman! Your rifle looks like it belongs in the Star Blazer cartoon!!!! LOL. I like your attitude though. If it makes you feel better I also own fake can, but I call mine a barrel shroud :D




I am so new to this..... I've called it a "Fake Suppressor", "Flash hider" and a "muzzle brake". :shrug:

motox917
05-22-2013, 9:39 AM
Here's my middy/dissipator I just finished.

Kaiser Defense lower with a PSA ACS-L lower build kit
Magpul BAD lever
PSA Mid-length "dissipator" upper
Magpul handguard
Aimpoint PRO
Magpul BUIS

http://i558.photobucket.com/albums/ss30/motox917/DSCN0717_zpsce383610.jpg

calaveras
05-22-2013, 3:05 PM
http://i1233.photobucket.com/albums/ff389/xmulisha86/F01D639C-1CCF-4AC3-B67C-5C7B00568A20-1570-00000187F5577CAD_zps761d19d1.jpg

Anybody know who makes this handguard?

Beautiful rifle, by the way. This looks a lot like how I want my current build to end.

NickTheGreek
05-22-2013, 3:49 PM
Anybody know who makes this handguard?

Beautiful rifle, by the way. This looks a lot like how I want my current build to end.

Midwest Industries. I have one on my 6.8 rifle and it is amazing. Super light, very small diameter, and looks badass.

http://i.imgur.com/2KlIKLql.jpg
http://i.imgur.com/OD2y06al.jpg

calaveras
05-22-2013, 4:04 PM
Midwest Industries. I have one on my 6.8 rifle and it is amazing. Super light, very small diameter, and looks badass.

http://i.imgur.com/2KlIKLql.jpg
http://i.imgur.com/OD2y06al.jpg

Thanks! And nice rifle!

Yeah, lightweight is the route that I'm trying to take with my build.

NickTheGreek
05-22-2013, 9:01 PM
Thanks! And nice rifle!

Yeah, lightweight is the route that I'm trying to take with my build.

Thanks. Lightweight is definitely the way to go. Some rifles feel great when they have some weight to them but I truly believe an AR should be featherlight. I weighed mine on the bathroom scale at just over 5lbs unloaded and can hold it out one-handed with ease. My stock S&W M&P-15 Tactical makes my arm shake when holding it out.

mariley85
05-24-2013, 11:14 AM
http://imgur.com/aOD5MJa.jpg

henmar77
05-25-2013, 8:25 PM
I built mine for fun. May swap the barrel and bolt and go to 6.8 though. I also regularly bring my rifle with me when upland bird hunting in case I see a hog. Within 50-75yds this thing will drop a hog cold and accurately too. Much lighter than my 8lb bolt-action rifle and it fits in my backpack, so I may end up bringing it with me instead of the trusty Ruger M77.

that sounds like a good reason to have one i guess.

dut
05-26-2013, 7:54 AM
Looking for opinions on bridging the rail gap with my red dot.

I read mostly bad, but no one has had any issues running their optics like this, so I'm not entirely sure on the debate.

Anyone on here have issues?

http://dut619.com/misc/rail.jpg

http://dut619.com/misc/rail_2.jpg

Parabellus
05-26-2013, 8:06 AM
No pistol grip, no collapsing stock, no flash suppressor, and NO BULLET BUTTON.:p
http://i100.photobucket.com/albums/m8/Parabellus/Mini14_556mm_195-58666_1998-0373.jpg~original (http://s100.photobucket.com/user/Parabellus/media/Mini14_556mm_195-58666_1998-0373.jpg.html)

deviljon
05-26-2013, 8:46 AM
Looking for opinions on bridging the rail gap with my red dot.

I read mostly bad, but no one has had any issues running their optics like this, so I'm not entirely sure on the debate.

Anyone on here have issues?

http://dut619.com/misc/rail.jpg

http://dut619.com/misc/rail_2.jpg

No issues here.

http://i53.photobucket.com/albums/g71/j0ny4ng/blockII.jpg

SuperSet
05-26-2013, 8:58 AM
Looking for opinions on bridging the rail gap with my red dot.

I read mostly bad, but no one has had any issues running their optics like this, so I'm not entirely sure on the debate.

Anyone on here have issues?


Your clamp is actually still on the upper receiver so no worries. I've never seen an issue with this but have seen issues with folks mounting their stuff on handguards (i.e. wandering zero).

dut
05-26-2013, 11:35 AM
Ight, cool. I was about to get rid of my iron sights... no "back up" sights then... although I highly doubt I'll ever be in a situation where I would need a back up of anything. Lol.

Veggie
05-26-2013, 12:18 PM
Even if part of the mount was on the rail as long as the bolt/locking lever was on the upper you would be fine too.

dut
05-26-2013, 1:25 PM
Even if part of the mount was on the rail as long as the bolt/locking lever was on the upper you would be fine too.

I'm contemplating on selling my BUIS.

They weren't cheap and would rather sell to someone that would actually put them to use.

I have never used them, they just lay down on my rail. Lol.

Thorax
05-26-2013, 2:59 PM
Lilja 24" 1-8 barrel, chambered in a modified Wylde by me, headspaced and crowned by me.
JD lower.
Spikes upper.
Heavily modded mil spec trigger @ 1.5lbs. non-rotating pins.
Swarovski 6-18x50 scope.
So many other mods I forget them all, rest assured it is tweaked twisted and bent.
Since this pic was taken (with a crappy arsed cellphone) I have changed to a seekins forearm and a GG&G bipod (Harris sucks for any real precision).

Result ?
She'll shoot 3/8"......at 200 yards :D
Usually fed with 80gr. AMAX's @ 2700 fps'ish.

NickTheGreek
05-26-2013, 4:59 PM
Lilja 24" 1-8 barrel, chambered in a modified Wylde by me, headspaced and crowned by me.
JD lower.
Spikes upper.
Heavily modded mil spec trigger @ 1.5lbs. non-rotating pins.
Swarovski 6-18x50 scope.
So many other mods I forget them all, rest assured it is tweaked twisted and bent.
Since this pic was taken (with a crappy arsed cellphone) I have changed to a seekins forearm and a GG&G bipod (Harris sucks for any real precision).

Result ?
She'll shoot 3/8"......at 200 yards :D
Usually fed with 80gr. AMAX's @ 2700 fps'ish.

http://www.calguns.net/calgunforum/attachment.php?attachmentid=236136&d=1369609130


What handguard is that? I have a similar one on my pistol but wanted a longer one for my hunting rifle. btw, fixed the photo attachment for ya.

Thorax
05-27-2013, 6:50 AM
Hogue

MrPlink
05-28-2013, 4:28 PM
Actually guys it was not the mean comments that made me change out my muzzle brake.

What you need to change now is how you have your scope mounted on your new set up. Bridging the HG and upper ='s no no

Congrats. You're burning a perfectly good 5.56 round to make .22wmr energy.

You probably still dont want to stand in front of it. Besides even if he misses you will go deaf and blind Im sure ;)

fresnoguy
05-28-2013, 6:43 PM
http://i.imgur.com/2l7a5js.jpg
My first centerfire rifle. 9.6 pound .223. I feel ridiculous.

henmar77
05-28-2013, 6:46 PM
http://i.imgur.com/2l7a5js.jpg
My first centerfire rifle. 9.6 pound .223. I feel ridiculous.

thats the weight of mine and i hike with it 10-20 miles while hunting. its good weight. When you start going past 10 is when you really feel it.

G21Shooter
05-31-2013, 8:18 AM
Noveske RECON build finished!

http://i298.photobucket.com/albums/mm245/jcole_08/IMG_0001-1_zps824d1dc5.jpg

Panda48264
05-31-2013, 9:49 AM
I'm contemplating on selling my BUIS.

They weren't cheap and would rather sell to someone that would actually put them to use.

I have never used them, they just lay down on my rail. Lol.

I use mine on occasion. But that is what they are there for; just in case. As for your optic mount you could buy a cantilever mount like this one:
https://www.primaryarms.com/Primary_Arms_High_Cantilever_30MM_Mount_p/pahicant.htm
As long as your rail lines up with your upper there shouldn't be an issue extending past the upper. My rifle with the older VTAC Alpha rail does not perfectly line up so mounting the red dot past the upper rceiver rail space shifted it slightly right by 1 mm or 2 and afeccted how tight the mount was held on.

danian18
06-04-2013, 1:20 AM
http://img.tapatalk.com/d/13/06/04/pupequra.jpg

blkA4alb
06-04-2013, 11:40 AM
http://i61.photobucket.com/albums/h65/blkA4alb/Guns/Photo%20shoot/file_zpsa697abb3.jpg (http://s61.photobucket.com/user/blkA4alb/media/Guns/Photo%20shoot/file_zpsa697abb3.jpg.html)

Arteel
06-04-2013, 9:50 PM
http://i51.photobucket.com/albums/f362/DC2Projektz/businessend2.jpg (http://s51.photobucket.com/user/DC2Projektz/media/businessend2.jpg.html)

Kermit8ard
06-04-2013, 10:29 PM
It's legal (registered). Colt Sporter Lightweight circa 1993. Aimpoint CompML2. 4-position stock (RRA).http://erem.bescomputer.com/6.jpg
http://erem.bescomputer.com/7.jpg
http://erem.bescomputer.com/8.jpg
http://erem.bescomputer.com/9.jpg

Germz
06-06-2013, 5:33 PM
http://img209.imageshack.us/img209/1906/img4222a.jpghttp://img13.imageshack.us/img13/483/img4223xs.jpg

ILVH8RS
06-06-2013, 5:51 PM
239428

239429

My first Billet build, Anarchy Arms. Have had mixed reviews about the Strike Industries Barrel Shroud but don't really care. I think it looks Bad*****. And the thing shoots like a dream. Huge thanks to the guys at Wilde Built Tactical in La Mesa!!!:D

Dumas1012
06-06-2013, 10:35 PM
Here's a little peek at my current project. Nothing more then a plain Jane, but she'll be ready in a couple months. Waiting on some parts and a paint job.

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/ar13.jpg

Arteel
06-13-2013, 10:04 AM
http://i51.photobucket.com/albums/f362/DC2Projektz/5C0F4C11-7276-4BB0-B4B7-732A47446FD9-8107-000008B593EED3B9.jpg

Germz
06-15-2013, 6:36 PM
80%er. Work done to lower at Ares Armor. CMMG LPK.
BCM upper. Magpul Furniture, for now.

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/1015832_10151276557882824_205122842_o.jpg

drptpgt
06-26-2013, 1:28 AM
http://i625.photobucket.com/albums/tt331/DETSOOB/20130625_173329.jpg

Nuuze
06-26-2013, 1:54 AM
http://sphotos-h.ak.fbcdn.net/hphotos-ak-ash3/8674_10201300355619577_313989581_n.jpg

G21Shooter
06-26-2013, 9:25 PM
http://i298.photobucket.com/albums/mm245/jcole_08/bcm15_zps28adf21c.jpg

Dumas1012
06-27-2013, 10:01 AM
http://i625.photobucket.com/albums/tt331/DETSOOB/20130625_173329.jpg

Nice collection. Details on the receivers on the right please?

cultex
06-27-2013, 2:58 PM
My first AR, a JP-15. I went with the "buy once, cry once" philosophy.

http://i1278.photobucket.com/albums/y515/cultex/2013-06-27152737_zps2a93938d.jpg

NickTheGreek
06-27-2013, 7:41 PM
My first AR, a JP-15. I went with the "buy once, cry once" philosophy.

http://i1278.photobucket.com/albums/y515/cultex/2013-06-27152737_zps2a93938d.jpg

What's the red ribbed stuff inside the handguard tube?

cultex
06-27-2013, 7:58 PM
It's a thermal dissipator. It increases the surface area and keeps the barrel cool.

danmellinger
06-27-2013, 8:06 PM
My first and only right now. Custom build aero precision lower and COP upper, FN barrel, Y/M bcg, and you can check my other post for further details as I'm posting from my cell.
http://img.tapatalk.com/d/13/06/28/9ybyzyve.jpg
http://img.tapatalk.com/d/13/06/28/a4a9azev.jpg

Sent from my SGH-I747 using Tapatalk 2

calaveras
06-29-2013, 3:52 PM
http://i625.photobucket.com/albums/tt331/DETSOOB/20130625_173329.jpg

The rifle on the right is pure beauty! Cerakote?

santsys
07-07-2013, 9:50 AM
Here's the AR-15 I've been putting together!

Coronado Arms CA15 Lower: http://l.santsys.com/107XWqD
BCM Upper: http://l.santsys.com/14ZijWG

I have some videos up on my YouTube page here, http://www.youtube.com/user/santsys/videos. If interested. :)

http://www.santsys.com/images/ar15/IMG_0577.jpg
http://www.santsys.com/images/ar15/IMG_0581.jpg

XenosAce
07-07-2013, 4:33 PM
Here is mine. Do not know how to get displayed so sorry having to click link, and not so good quality pic.

drptpgt
07-07-2013, 9:24 PM
http://i625.photobucket.com/albums/tt331/DETSOOB/20130625_173329.jpg

Thanks guys, rifle on the right was built from an 80% lower and a Franklin Armory upper. Both Cerakoted Tactical Grey.

Middle pistol also an 80%.

Left rifle is a complete factory built Noveske N6.

Joey

baggss
07-08-2013, 9:23 AM
I'll play.

Pretty much your out of the box stock Bushmaster Carbon-15 with the Red Dot scope. Got it out of Jail on 7 July. We'll see what changes come.

http://www.phoppe.com/Carbon15.jpg

ccalsubi
07-08-2013, 9:25 PM
iPhone pic from a light box after edit
http://i1113.photobucket.com/albums/k518/ccalsubi/IMG_2275.jpg
http://i1113.photobucket.com/albums/k518/ccalsubi/IMG_2269.jpg

CreamyFettucini
07-10-2013, 8:51 PM
My Frankenbuild:

http://www.calguns.net/calgunforum/attachment.php?attachmentid=248232&stc=1&d=1373518170

EuReekCA
07-20-2013, 5:30 AM
First AR build (of 7), M16A4 clone

http://i25.photobucket.com/albums/c82/vw_fetish/ForumPics/A4gery_1911_sm_zps2390d68a.jpg

DropTheHammer
07-25-2013, 3:59 PM
good thread

ReDgUaRd008
07-25-2013, 5:04 PM
My Galil ARM 5.56 built by Mr. Randall Rausch AKA ar15barrels. Planning a range trip within the next 1-2 months.

http://i18.photobucket.com/albums/b124/ReDgUaRd008/1005086_10200638817947109_1245670510_n.jpg (http://s18.photobucket.com/user/ReDgUaRd008/media/1005086_10200638817947109_1245670510_n.jpg.html)

hcbr
07-27-2013, 11:07 AM
Just DROS'd this bad boy yesterday to keep my Black SCAR 17 company ! say hello to my FDE SCAR 16! yay!

http://farm3.staticflickr.com/2892/9379915636_2aac7fab60_z.jpg

Loner
07-28-2013, 8:00 PM
My Galil ARM 5.56 built by Mr. Randall Rausch AKA ar15barrels. Planning a range trip within the next 1-2 months.

http://i18.photobucket.com/albums/b124/ReDgUaRd008/1005086_10200638817947109_1245670510_n.jpg (http://s18.photobucket.com/user/ReDgUaRd008/media/1005086_10200638817947109_1245670510_n.jpg.html)
How much did that run you overall?

Guapoh
08-07-2013, 9:02 PM
Couple of my self-loaders:

http://i560.photobucket.com/albums/ss43/Tony_Galyean/DMRDone_zpsf0ae8d21.jpg

LWRC M6A3 18" DMR, Magpul PRS, Leupold VXR Patrol Firedot SPR

http://i560.photobucket.com/albums/ss43/Tony_Galyean/image_zpsb3b080b4.jpg

LWRC M6SPR with IC architecture ambidextrous lower.

G21Shooter
08-08-2013, 7:34 PM
My coyote getter, Rock River Varmint 20 inch bull barrel upper, Franklin lower.

http://i298.photobucket.com/albums/mm245/jcole_08/photo-6_zpsd495be2b.jpg

Dumas1012
08-08-2013, 10:53 PM
First billet build. Black Rain Ordnance in Tungsten gray. Still undecided on BUS :facepalm:

Sorry for the lousy iphone pictures. I have a Nikon SLR which I do not know how to use. Some natural sunlight wouldn't hurt either.

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1105.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1111.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1114.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1113.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1117.jpg

Byrd2000
08-09-2013, 4:14 PM
A bit of a Franken-gun to show off!

A Saiga .223 with a Definitive Arms AR magazine conversion, Tapco SAW grip and Warsaw stock, Solar Tactical grip wrap, Midwest Industries rail, Vortex SPARC, and Spikes Dynacomp Extreme.

http://farm3.staticflickr.com/2811/9473605641_a1e1365a40_o.jpg (http://www.flickr.com/photos/55284716@N06/9473605641/)
IMG_20130809_045334 (http://www.flickr.com/photos/55284716@N06/9473605641/)

http://farm8.staticflickr.com/7411/9476396340_00b6e3ca14_o.jpg (http://www.flickr.com/photos/55284716@N06/9476396340/)
IMG_20130809_044953 (http://www.flickr.com/photos/55284716@N06/9476396340/)

Whitefang
08-12-2013, 7:03 AM
First billet build. Black Rain Ordnance in Tungsten gray. Still undecided on BUS :facepalm:

Sorry for the lousy iphone pictures. I have a Nikon SLR which I do not know how to use. Some natural sunlight wouldn't hurt either.

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1105.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1111.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1114.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1113.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1117.jpg

What handguard is that?

stevedusa
08-12-2013, 9:45 AM
Got a SW M&P-15 Sport for my Bday, my first ever rifle.

Replaced the hand guard with UTG carbine quad, add a Magpul angled foregrip and a well grip.

Trust me the mag is in there... the well grip swallowed it.

Hasn't fired it yet, maybe this weekend? We'll see lol.

BTW mine came with a Magpul MBUS 2 folding sight OTB... almost bought one at the gun show a few weeks back!

256644

256645

laylow
08-12-2013, 6:36 PM
What handguard is that?

Fortis
http://fortismfg.com/index.php?route=product/product&path=59&product_id=63

epilepticninja
08-12-2013, 9:49 PM
A bit of a Franken-gun to show off!

A Saiga .223 with a Definitive Arms AR magazine conversion, Tapco SAW grip and Warsaw stock, Solar Tactical grip wrap, Midwest Industries rail, Vortex SPARC, and Spikes Dynacomp Extreme.

http://farm3.staticflickr.com/2811/9473605641_a1e1365a40_o.jpg (http://www.flickr.com/photos/55284716@N06/9473605641/)
IMG_20130809_045334 (http://www.flickr.com/photos/55284716@N06/9473605641/)

http://farm8.staticflickr.com/7411/9476396340_00b6e3ca14_o.jpg (http://www.flickr.com/photos/55284716@N06/9476396340/)
IMG_20130809_044953 (http://www.flickr.com/photos/55284716@N06/9476396340/)

I hate anything featureless, but that thing actually looks trick. Nice gun.

Byrd2000
08-14-2013, 6:18 PM
I hate anything featureless, but that thing actually looks trick. Nice gun.

Thank you! Only a small number of tweaks left, but I love her. Though she could stand to lose a little weight.

umd
08-15-2013, 2:18 PM
http://distilleryimage10.ak.instagram.com/d44ae72ef6ea11e28b0522000ae902d2_7.jpg

http://distilleryimage1.ak.instagram.com/8d7abafa020611e3b83422000a1f9e4c_7.jpg

http://distilleryimage11.ak.instagram.com/3d158b50021811e3bbaa22000a1fb198_7.jpg

umd
08-15-2013, 2:21 PM
Fortis
http://fortismfg.com/index.php?route=product/product&path=59&product_id=63

I have the same one. I really like it, and I've gotten a ton of comments about it.

http://distilleryimage4.ak.instagram.com/cf656460cf1111e285e022000a9e51fb_7.jpg

MakeYaBootyBurn
08-15-2013, 2:22 PM
^^ nice setup!!

umd
08-16-2013, 5:36 AM
Thanks

goofito5150
08-22-2013, 8:22 PM
My first build

Stripped frontier:90+25dros+TAX
Lower lpk:60$
Stock:40$
Upper:complete upper 16" 1/8 m4 ar 15 dragon head upper receiver 5.56 nato
Centerpoint scope 20x40 :80$
45 degree sight:25$

coyotebait
08-23-2013, 4:14 AM
My first build

Stripped frontier:90+25dros+TAX
Lower lpk:60$
Stock:40$
Upper:complete upper 16" 1/8 m4 ar 15 dragon head upper receiver 5.56 nato
Centerpoint scope 20x40 :80$
45 degree sight:25$

Lightning McQueen adds a nice touch. :D

damngato
08-23-2013, 6:57 AM
First billet build. Black Rain Ordnance in Tungsten gray. Still undecided on BUS :facepalm:

Sorry for the lousy iphone pictures. I have a Nikon SLR which I do not know how to use. Some natural sunlight wouldn't hurt either.

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1105.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1111.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1114.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1113.jpg

http://i385.photobucket.com/albums/oo293/phuphu1012/Sig%20Sauer%20P229%20hard%20chrome/IMG_1117.jpg


That is beautiful! Awesome setup sir

BOATS N HOES
08-23-2013, 8:04 AM
Love that rail.

jbburrows
08-23-2013, 8:06 AM
That is beautiful! Awesome setup sir

Second that on the BRO! Looks fantastic. I've been considering a tungsten build, myself. You just helped me make up my mind!

consultadrone
08-25-2013, 3:09 PM
Twin match grade builds. Finally complete. (Just waiting on a Wilson TTU for one)

https://dl.dropboxusercontent.com/u/106517578/TwinsRight_resize.jpg

Rough Gear Review
08-26-2013, 7:51 PM
http://i1283.photobucket.com/albums/a549/RoughGearReview/003_zpsefb9cd58.jpg

http://i1283.photobucket.com/albums/a549/RoughGearReview/002_zpseaf7811b.jpg

Core-15
Bushmaster
Colt
Sig M-400
HK MR556

G21Shooter
09-01-2013, 12:32 PM
Whenever I kick myself for spending too much money on AR stuff, I come here and have a look, then I don't feel so bad!!

Some nice guns here!

Dumas1012
09-06-2013, 8:38 AM
Second that on the BRO! Looks fantastic. I've been considering a tungsten build, myself. You just helped me make up my mind!

It's been a while since I checked this forum. Thanks everyone. Click on the link below for better pictures of the Tungsten Cerakote if you're planning to go that route.

http://www.calguns.net/calgunforum/showthread.php?t=805636&highlight=tungsten

dcroberson
09-11-2013, 6:19 AM
S&W M&P Lower
Jard adjustable trigger
DPMS Oracle upper
Adams arms piston
Trijicom TA01NSN
Hydraulic buffer
Bad Lever
MI folding sights
More accurate than I am

drdarkness
09-12-2013, 12:39 AM
Twin match grade builds. Finally complete. (Just waiting on a Wilson TTU for one)

https://dl.dropboxusercontent.com/u/106517578/TwinsRight_resize.jpg

What mount is that with the Aimpoint?

tacticalcity
09-12-2013, 1:05 AM
What mount is that with the Aimpoint?

Looks like an ARMS Mount with the cantilever spacer.

Dsal_13
09-20-2013, 5:31 AM
What do you guys think of my setup?

http://i456.photobucket.com/albums/qq287/dsalazar09/20130919_211310.jpg (http://s456.photobucket.com/user/dsalazar09/media/20130919_211310.jpg.html)

deviljon
09-20-2013, 5:48 AM
It's interesting. Does the front sight block the view when looking through the scope? It looks like it would. And how solid is that drop in rail to have the scope partially mounted on it?

Dsal_13
09-20-2013, 5:52 AM
It's interesting. Does the front sight block the view when looking through the scope? It looks like it would. And how solid is that drop in rail to have the scope partially mounted on it?

I just got the rail and the scope yesterday so go easy on me lol. But I looked through the scope and no it does not block it at all! I thought it would also... Idk how it doesent but it doesent. And ibam going to shift the scope back so its not partially mounted on the rail.

Full Clip
09-20-2013, 5:57 AM
http://distilleryimage11.ak.instagram.com/3d158b50021811e3bbaa22000a1fb198_7.jpg

Nice UC grip!

http://i699.photobucket.com/albums/vv356/nimitzco/UmbrellaCorpTacInsignia.jpg

Kokopelli
09-20-2013, 6:03 AM
http://i298.photobucket.com/albums/mm245/jcole_08/bcm15_zps28adf21c.jpg

Thanks for posting that picture. I was wondering what my EBR would look like with Magpul FDE attire.

http://i281.photobucket.com/albums/kk239/avmusician/Guns/100_3033_zps3f1574ae.jpg

tacticalcity
09-20-2013, 11:49 PM
I just got the rail and the scope yesterday so go easy on me lol. But I looked through the scope and no it does not block it at all! I thought it would also... Idk how it doesent but it doesent. And ibam going to shift the scope back so its not partially mounted on the rail.

Only a small area is being magnified, and it is an area above the front sight post. You'll get an occasional shadowing and reflection of the front sight post but that is it. Nothing to fret about.

Mcasshl247
09-25-2013, 10:52 PM
LWRCI M6A2 5.56
Mapul AFG, MOE grip, MBUS Gen2, Magpul STR stock, MS3 sling, rainier arms Raptor Charging handle, and a few other add ons.

tjmorales
09-26-2013, 8:56 AM
http://i11.photobucket.com/albums/a187/GodofWar1975/Zombie%20Apocalypse%20Preparation/09270708_zpsb30e38d5.jpg (http://s11.photobucket.com/user/GodofWar1975/media/Zombie%20Apocalypse%20Preparation/09270708_zpsb30e38d5.jpg.html)
http://i11.photobucket.com/albums/a187/GodofWar1975/Zombie%20Apocalypse%20Preparation/09270712_zpscb86b67f.jpg (http://s11.photobucket.com/user/GodofWar1975/media/Zombie%20Apocalypse%20Preparation/09270712_zpscb86b67f.jpg.html)
http://i11.photobucket.com/albums/a187/GodofWar1975/Zombie%20Apocalypse%20Preparation/09270715_zps963b65e9.jpg (http://s11.photobucket.com/user/GodofWar1975/media/Zombie%20Apocalypse%20Preparation/09270715_zps963b65e9.jpg.html)
PRI SPR Upper Complete Mk12 Mod 0
Douglas Barrel 1:8 twist
Gas Buster Charging Handle
OPS Inc Brake and Collar
PRI Front and Rear sights
Gen III Carbon Fiber free float arm
LMT Complete Lower
Geissele SSA-E 2 Stage trigger
Sierra Tactical SPR Grip
Magpul Enhanced Trigger Guard
Magpul PRS Stock
Vortex 2.5-10x32 Viper PST 30mm Rifle Scope MRAD
Vortex ADR Cantilever 30mm Ring Mount
Vortex Optics KillFLASH ARD Optic Cover Flip Cap
GG&G XDS-2 Quick Detach Bipod (On its way)

Germz
10-04-2013, 8:12 PM
http://img687.imageshack.us/img687/3591/4naj.jpg

80% lower that I spray painted. I'm cheap. -_-

N3Hd3LS
10-16-2013, 8:56 PM
http://pic20.picturetrail.com/VOL253/2092261/24276731/407812483.jpg

Ammo Bros Defcon Lower
Phase 5 Tactical LPK
DPMS upper
Noveske NSR 13.5

more to come...

lucky_lefty
10-17-2013, 6:47 AM
My first AR build. Let me know what you think...

infringed711
10-17-2013, 8:07 AM
My first AR build. Let me know what you think...

Beautiful, well done sir

coyotebait
10-17-2013, 8:27 AM
My first AR build. Let me know what you think...

A "lefty," nice.

ogFrag
10-18-2013, 10:24 AM
http://i68.photobucket.com/albums/i8/jaker277/FDE/20131017_201718.jpg

FERFRANS up on STAG low MAGPUL furniture surplus EOTECH 553 from law-guns

plan to add green laser and ~500 lumen light...

Mossy Man
10-18-2013, 9:33 PM
http://i.imgur.com/6eRVPUS.png

Anderson MFG .223/5.56MM Lower
PSA Lower Build Kit
PSA 16" 1:7 C/l MPI/HTP 5.56NATO Barrel w/MI SS12G2 12" Free Float Hand Guard
PSA Full Auto M16 Carpenter 158 BCG
VLTOR BCM Gunfighter Mod 4 Charging Handle
Magpul MBUS Front + Rear
Magpul Fixed Carbine Stock
Assault Planet Bullet Button
Hogue Monogrip
DPMS Three Prong Early A1-Style Flash Suppressor
Unknown Sling attachment
Specter Gear 2-point CAR15 Sling

AK4me
10-20-2013, 4:01 PM
http://img.tapatalk.com/d/13/10/21/7a4u3ymy.jpg

Sent from my phone

B13SER
10-20-2013, 7:31 PM
http://img.tapatalk.com/d/13/10/21/3e8enagy.jpg

http://img.tapatalk.com/d/13/10/21/yma4ysa5.jpg

Sent from my KFTT using Tapatalk HD

X-actly
10-20-2013, 9:37 PM
https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn2/1375139_10200555945573383_862138304_n.jpg
Here are my latest creations. A Custom Cerakoted Benchmade Infidel 3300 in "Tactical Grey" (H-227Q) with subtle "Sniper Grey" (H-234Q) Striping on the blade and pocket clip, and Stainless Steel Components. In the background is a custom built AR15 in "Sniper Grey" (H-234Q) sporting a 14.5" SOCOM Barrel (Pinned & Welded to 16.125") in "Graphite Black" (H-146Q), 1:7RHT, 5.56x45 NATO, FA BCG, 12" YHM FF HG, Custom Low Pro Gas Block (Reduced Original FSB), "PUP GRIP" Fore-Grip, Bushnell Elite TRS-25 Red Dot Sight w/ UTG High Rise Mount. As always, every single bit of work was done by me from beginning to end. You know you have some mechanical skills when you can disassemble a Benchmade Infidel and make it work again upon reassembly...COMPLEX INTERNALS!!!...lol.

ZRen
10-21-2013, 8:04 AM
Mine.

Magpul furniture
vortex SPARC
Geisselle SSA-E trigger
Surefire MB556k brake

http://i1367.photobucket.com/albums/r791/slimsylez/68e0aa4c81caa059668a4ae2b9c6d4aa_zps6315b5fa.jpg

Germz
10-24-2013, 6:44 PM
...Bushnell Elite TRS-25 Red Dot Sight w/ UTG High Rise Mount...

Hell yea. Same optic and I love it for how cheap it is!

http://imageshack.us/a/img15/6453/arzq.jpg

GUNS!!!!
10-25-2013, 11:18 AM
291 and 293: no ambi mag release though.... sadness.

http://i41.tinypic.com/2uek0w5.jpg

LJG619
10-25-2013, 12:00 PM
275530275531

My new Daniel Defense AR with Geissele SMR MK1 on DD 16" LW Barrel and Battlecomp 1.0.

Full Clip
10-25-2013, 12:16 PM
Damn, those are sweet.

291 and 293: no ambi mag release though.... sadness.

http://i41.tinypic.com/2uek0w5.jpg

CrossedRifles
11-07-2013, 12:21 AM
http://puu.sh/5bapc.jpg

SoCal Choppas
11-07-2013, 1:20 PM
HK SL8-1, >>RAW<< 5.56, G36 Dual Optic Carry Handle

https://lh4.googleusercontent.com/-VrhubxUPnhU/UnwL5sOoBwI/AAAAAAAAAo8/YQIroR_vZ5U/w958-h471-no/IMG_3381.jpg

https://lh3.googleusercontent.com/-Wqo9TzQ_D_w/UnwL64eaXfI/AAAAAAAAApA/af2HvHrVQic/w865-h647-no/IMG_3382.jpg

https://lh6.googleusercontent.com/-mScAlDUiHNc/UnwL4H8vVxI/AAAAAAAAAow/Nk_K84tmNFk/w957-h387-no/IMG_3380.jpg

BenjaminCA
11-07-2013, 5:31 PM
Very cool SoCal!

55six
11-12-2013, 2:19 PM
http://img.tapatalk.com/d/13/11/13/byzajare.jpg

hossb7
11-12-2013, 9:24 PM
http://i73.photobucket.com/albums/i231/hossb7/guns/IMG_20131110_183305_890.jpg

http://i73.photobucket.com/albums/i231/hossb7/guns/2013-01-26_15-39-40_862.jpg

http://i73.photobucket.com/albums/i231/hossb7/shooting/middy.jpg

rrr70
11-13-2013, 9:47 AM
Brand new in the box. :D

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1402838_10201964262335629_2025220762_o.jpg

bsumoba
11-15-2013, 11:02 PM
http://i1253.photobucket.com/albums/hh586/Bryan_Sumoba/DSC_0106_zps8267ab6b.jpg

SA227driver
11-23-2013, 10:48 PM
283415283416283417

283418

Big bug
11-30-2013, 3:12 PM
http://i748.photobucket.com/albums/xx126/Znzytivguy/DSC04330_zpsf3508bbd.jpg

http://i748.photobucket.com/albums/xx126/Znzytivguy/DSC04326_zps2e73704f.jpg

http://i748.photobucket.com/albums/xx126/Znzytivguy/Wifes2_zpsef3f8cb1.jpg

Optimus
12-04-2013, 11:31 AM
Built on an Optimus Defense AR-15 80% Lower

http://optimusdefense.com/image/data/Media/OD_0340.jpg

http://optimusdefense.com/image/data/Media/OD_0376.jpg

For more information on the Lower, more picture of AR builds and information on completing an 80% lower please visit the Optimus Defense website (http://optimusdefense.com).

Find (http://www.facebook.com/optimusdefense) Optimus Defense on Facebook!

mariley85
12-06-2013, 10:19 PM
added some little goodies from Triad.

http://i39.tinypic.com/2nrhdeu.jpg

CRTguns
12-20-2013, 9:39 PM
Built on an Optimus Defense AR-15 80% Lower

http://optimusdefense.com/image/data/Media/OD_0340.jpg

http://optimusdefense.com/image/data/Media/OD_0376.jpg

For more information on the Lower, more picture of AR builds and information on completing an 80% lower please visit the Optimus Defense website (http://optimusdefense.com).

Find (http://www.facebook.com/optimusdefense) Optimus Defense on Facebook!

Optimus recievers are very cool. Even to us Nevadans.

Arteel
12-20-2013, 9:57 PM
http://i51.photobucket.com/albums/f362/DC2Projektz/96404F99-B9E1-4A5B-85E1-96093256F3B6-12307-00000FDAD0205543_zpsc2ef8310.jpg

BenjaminCA
12-26-2013, 10:30 PM
http://img.tapatalk.com/d/13/12/27/7equ3any.jpg

http://img.tapatalk.com/d/13/12/27/2y4ynydu.jpg

http://img.tapatalk.com/d/13/12/27/4a5abehy.jpg

My %80


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

CRTguns
01-11-2014, 7:20 PM
Kinda silly... but what the heck.
M60 bipod and FH. Old Elcan.
Sun devil's new forearm.
http://imageshack.com/a/img62/9130/9e4y.jpg
http://imageshack.com/a/img46/1759/xigd.jpg

CrossedRifles
01-17-2014, 11:39 AM
http://puu.sh/6ojnD.jpg

coy80176
01-19-2014, 9:05 AM
http://i826.photobucket.com/albums/zz188/coy80176/photo3_zps1f5271e9.jpg (http://s826.photobucket.com/user/coy80176/media/photo3_zps1f5271e9.jpg.html)

MrLUUzer
01-31-2014, 12:04 AM
Like other users, when I think I've spent too much money on my guns, I don't feel so badly after looking through this thread. Lots of great pics on here!

Here's one of mine (no fancy photography here, just my camera-phone):

http://vinhluuphoto.com/forum_images/001.jpghttp://vinhluuphoto.com/forum_images/002.jpg
http://vinhluuphoto.com/forum_images/003.jpg

Sig M400 with the following mods (at least the ones worth mentioning):
Aimpoint PRO
Troy MRF-CX Battle Rail
RRA 2-stage trigger
BCM charging handle

Cicada
01-31-2014, 10:39 AM
http://farm4.staticflickr.com/3708/12231223496_610d9c15f8_b.jpg

http://farm6.staticflickr.com/5545/12230696586_20df84f0e3_b.jpg (http://www.flickr.com/photos/bgateb/12230696586/)

Just-in
01-31-2014, 11:57 AM
Cicada, what type of buffer tube is that?

peacedivision
01-31-2014, 12:11 PM
PWS enhanced I think

Edit, $200 buffer tube, seriously?