PDA

View Full Version : picture request: magpul afg with surefire M952


xxG3xx
02-01-2010, 5:15 PM
Like the title says I would like to see how I can run a surefire M952 with pressure pad with a magpul afg.

Thanks

oni
02-01-2010, 7:38 PM
Get this switch from surefire:
http://www.surefire.com/Remote-Dual-Switch-for-WeaponLight-SR07

Put it on the top of the rail like in the following picture and pretend the X200 is the M952

You use your reaction hand thumb to activate the switch up top.
Though unless you have a long rail with the light up front and the AFG toward the back its going to be kinda hard to shoot reaction side.

http://lh5.ggpht.com/_U1yhk2pqKxM/S2Pt1ti_t2I/AAAAAAAAC4c/W3zxt9OonBE/IMG_0003.JPG

xxG3xx
02-01-2010, 8:26 PM
thanks I will look into that

aplinker
02-01-2010, 8:49 PM
If that were my rifle, above, I'd put the X300 out front on top, move the front sight back, and skip the pressure pad.

If you're going to run the pressure pad, run it up top like he's got it. There are pockets for the old style.

xxG3xx
02-06-2010, 9:48 AM
hopefully I can get my light in soon...I don't know how long i need the cord to be for the new switch

oni
02-06-2010, 12:53 PM
hopefully I can get my light in soon...I don't know how long i need the cord to be for the new switch

The switch I use above has a 7" cable. Should be long enough for most applications.

oni
02-06-2010, 12:54 PM
If that were my rifle, above, I'd put the X300 out front on top, move the front sight back, and skip the pressure pad.

If you're going to run the pressure pad, run it up top like he's got it. There are pockets for the old style.

I tried it with the X200 on top as you suggested but didn't like it.