PDA

View Full Version : Noveske N4 basic question


epic4444
01-26-2010, 2:59 PM
http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?item_id=u-lcb-556&cat=48&page=1&search=&since=&status=

Looking at putting one of these on my AR, it has a CTR and raddlock and i want to switch my LMT upper to a different AR and put this instead, would i be good to go straight from the factory like this or is it to short? I know the barrel must be 16 or 14.5 with FH fixed, but im asking about this exact model, can pop it on my AR and be good to go?

technique
01-26-2010, 3:14 PM
You gotta get a FH pinned on, since its 14.5 as is, and that's NFA.

bender152
01-26-2010, 3:23 PM
I used to have that same upper. Mine came with a vortex flashhider pinned from the factory.

As long as the flashhider is pinned and the OAL is 16", you're good to go.

epic4444
01-26-2010, 3:26 PM
so its good to go your saying bender?

technique
01-26-2010, 3:28 PM
I used to have that same upper. Mine came with a vortex flashhider pinned from the factory.

As long as the flashhider is pinned and the OAL is 16", you're good to go.

It gave no indication on that page that the FH was pinned.
Hopefully his will come like yours. I would call to be sure.

bender152
01-26-2010, 3:32 PM
It gave no indication on that page that the FH was pinned.
Hopefully his will come like yours. I would call to be sure.

+1

Mine was pinned, so I was good to go. I can't be 100% sure yours will be too, so call and ask. It will take all of 30 seconds.

epic4444
01-26-2010, 3:49 PM
Ya when they get them in stock ill make sure to call and see about pinned, thanks for the info guys

DULLYJAY
01-26-2010, 4:10 PM
They are pinned, I'm pretty sure. The one I got from Noveske was. I think Rainier Arms have them in stock. They do LEO/military discount too.