PDA

View Full Version : Info on 80% AR recievers


1919_4_ME
02-25-2005, 5:49 PM
What are some websites that offer 80% recievers,jig,drill,taps etc.A friend wants to get one to build a single shot?lol.Anyways thanks for the info! http://calguns.net/groupee_common/emoticons/icon_biggrin.gif

1919_4_ME
02-25-2005, 5:49 PM
What are some websites that offer 80% recievers,jig,drill,taps etc.A friend wants to get one to build a single shot?lol.Anyways thanks for the info! http://calguns.net/groupee_common/emoticons/icon_biggrin.gif

bwiese
02-25-2005, 6:19 PM
What a waste of time.

Just buy a DPMS single-shot lower for $150ish.

The costs of doing the setup & machining will likely cost far more than a cheap lower.

If you're making one from an 80% jig make sure you don't mill out the magwell area otherwise you're feloniously in possession of an unregistered/illegal AR15 receiver.

Bill Wiese
San Jose

fastmanusa
02-25-2005, 8:34 PM
Stop talking about it and build one. On a side note you could always mill the mag well out and and weld it shut before you are 100% complete.

Turbinator
02-26-2005, 9:25 AM
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by bwiese:
Just buy a DPMS single-shot lower for $150ish.
</div></BLOCKQUOTE>

Paid about $180 for mine, never have seen them for as low as $150.

Turby