PDA

View Full Version : will mac 90 gas tube fit wasr 10?


ak shooter762
10-12-2009, 6:00 PM
well will it work?

Lateralus
10-12-2009, 6:02 PM
It will.

Probably with minimal hammering too.

ak shooter762
10-12-2009, 6:05 PM
so it would still reload itself? really i just want a tube with the holes in it for the original ak look (i guess)

Lateralus
10-12-2009, 6:54 PM
so it would still reload itself? really i just want a tube with the holes in it for the original ak look (i guess)

You mean would it still cycle? Ive never tried it personally, but Im about 99% sure it will. If it fits, it will cycle. There is alot of room in the gas tube for the piston to move.

ak shooter762
10-12-2009, 8:56 PM
the mak 90 tube does come with holes in it right?

im thinking the gas might go out the tube holes and maybe not give enough pressure to push the bolt carrier far enough back. but i don't know...


i know that my bolt carrier was hitting the back of the reciever until i put a buffer on it, so maybe with the mak 90 tube i can take the buffer off...

69Mach1
10-12-2009, 9:00 PM
Yes a MAK 90 gas tube will fit (95% of the time) onto other AK's. ak, did you know that most all AK's have the vent holes? The Chinese just put them on the gas tube instead of on the gas block.

bohoki
10-12-2009, 9:32 PM
minor fitting may be required

you know of course that the tube is just a piston guide after the piston leaves the barrel portcylnder its not acting like a piston anymore

ak shooter762
10-13-2009, 1:55 PM
minor fitting may be required

you know of course that the tube is just a piston guide after the piston leaves the barrel portcylnder its not acting like a piston anymore


no i did not kno that, i just got my first ak, but people like you are teaching me more and more everyday........thanks for the info