PDA

View Full Version : AK help


CSACANNONEER
10-02-2009, 5:56 PM
So, I've got a chance to have a Norinco 86S demilled and the parts set to me from out of state. I seem to recall something about Noricos not being able to be assembled on NDS receivers but, I'm not sure. So, my questions are: Will Norico parts fit on a NDS? And, if so, which receiver(s) will work?

JAGGUY
10-02-2009, 6:09 PM
The trunnion on the Norinco is .023 thinner than the Euro AK's. You will need to use a receiver made from .063 (1.6mm) or use shims to make up the difference. Also the front and rear trunnion holes are different. Other than that it builds the same.
-greg

CSACANNONEER
10-02-2009, 6:21 PM
Thaks for the quick response!

So, can I find a receiver anywhere? I would need it to be a transferable receiver and not a flat build.

69Mach1
10-02-2009, 7:29 PM
So, I've got a chance to have a Norinco 86S demilled and the parts set to me from out of state. I seem to recall something about Noricos not being able to be assembled on NDS receivers but, I'm not sure. So, my questions are: Will Norico parts fit on a NDS? And, if so, which receiver(s) will work?

Wait, wait wait! Someone is going to destroy 1 of only 2000 Norinco Type 86S Bulpups in this country?! No, why?
http://www.dreadgazebo.com/gunporn/wp-content/uploads/2007/11/type86s.jpg

CSACANNONEER
10-02-2009, 7:38 PM
Wait, wait wait! Someone is going to destroy 1 of only 2000 Norinco Type 86S Bulpups in this country?! No, why?
http://www.dreadgazebo.com/gunporn/wp-content/uploads/2007/11/type86s.jpg

Maybe he gave me the wrong model number. I really doubt it's a bullpup. Anyway, what kind of receiver could I use?

69Mach1
10-02-2009, 7:40 PM
Maybe he gave me the wrong model number. I really doubt it's a bullpup. Anyway, what kind of receiver could I use?

What caliber? Type 56S is 7.62x39. Type 84 is .223. I think he combined the numbers. :)

A 1.6mm? Green Valley receivers, I think. Be aware that the Norinco's had only 1 rivet per side for their trigger guards.

CSACANNONEER
10-02-2009, 7:45 PM
I believe it is 7.62x39

69Mach1
10-02-2009, 7:46 PM
Or locate a NOS Global Trades AUSA 1.6mm receiver.

69Mach1
10-02-2009, 7:52 PM
I appologize. I mean Elk River receivers.
http://www.elkrivertoolanddie.com/receivers.htm