PDA

View Full Version : WTS: Stag 7H upper; Burris AR Tripler; ARMS 40L BUIS; Misc AR parts


dachan
09-16-2009, 9:08 PM
1) Stag 7H upper, NIB. 6.8spc, 20" stainless steel barrel w/ Hogue handguard. Asking $550.

2) Burris AR Tripler, NIB. Asking $170.

3) Millet 1 rings for Colt vented rib models, NIB. Asking $15.

4) Leupold Mark 4 30mm Dual Dovetail, matte, high rings, NIB. This part is currently listed in the Leupold catalog as #49958. Asking $20.

5) ARMS 40L Rear BUIS, NIB. Asking $95.

6) RRA CAR Handguards. NIB. Asking $15.

7) Stag R4 (oval) Handguard. NIB. 2prs available. Asking $10/pr.

8) S&W CAR Handguards. NIB. Asking $15.

9) Factory Springfield Armory XD-9 Sub-compact 16rnd magazine rebuild kit, with sleeve (X-Tension), NIB. Asking $45.


Shipping is flat $5 for any number of items unless otherwise noted. Magazine rebuild kits will ship disassembled as parts for the repair or replacement of similar magazines personally owned prior to Jan 1, 2000 or for the permanent construction of 10rnd magazines.


RRA/Colt 7.62x39 upper, used, excellent condition. This came to me as a complete Colt 7.62x39 A2 upper; I swapped the receiver to an unfired RRA A3 upper. Round count is unknow, but should be very low as all parts appear to be in excellent condition. Comes with one Colt 5rnd magazine and two CProducts 30rnd rebuild kits. Asking Sold.
RRA 16" AR Kit. Never assembled complete 100% RRA AR kit, all parts new in wrap; RRA carbine upper with 16" chrome-lined barrel and RRA free float quad-rail handguard, RRA LPK, RRA CAR stock, CProd 10/30 mag, bullet button. Just add any OLL receiver for a complete AR-15 carbine. Asking Sold.
DMPS AP4 Carbine Kit. Never assembled 16" carbine kit with carry handle. Just add any OLL receiver for a complete AR-15 carbine. Asking Sold.
Stag Model 2 AR Kit. Never assembled complete 100% Stag AR kit, all parts new in wrap; Stag 2H upper with 16" chrome-lined barrel and MI BUIS, Stag LPK, Stag CAR stock, CProd 10/30 mag, bullet button. Just add a Stag lower receiver for a complete Stag Model 2 or any OLL receiver for a complete AR-15 carbine. Asking Sold. Shipping is $20 for this item.
Stag 2T AR Kit. Never assembled complete 100% Stag AR kit, all parts new in wrap; Stag 2T upper with 16" chrome-lined barrel, Samson free-float quadrail handguard and ARMS 40L BUIS, Stag LPK, Stag CAR stock, CProd 10/30 mag, bullet button. Just add a Stag lower receiver for a complete Stag 2T or any OLL receiver for a complete AR-15 carbine. Asking Sold. Add $85 to substitute Magpul CTR stock.
DPMS LPK. NIB. Asking Sold.
RRA LPK. NIB. Multiple sets available. Asking Sold. Add $15 for RRA Hogue Grip, add $90 for RRA NM 2-stage trigger.
RRA NM 2-Stage Trigger, NIB. IMO one of the most cost effective accuracy improvements produced. Asking Sold.
RRA LPK, NIB w/ takeoff Bushmaster FCG. 2 sets available. Asking Sold. Add $15 for RRA Hogue Grip.
EoTech 517.A65. NIB. Uses AA batteries, buttons on left side, raised 7mm base. Asking Sold.
EoTech XPS2-0. NIB. Newest model, uses single transverse mounted CR123 battery for smallest footprint yet. Asking Sold.
Burris FastFire II. NIB, sealed shrink wrap. Waterproof red dot reflex sight with picatinny mount. 2 available. Asking Sold.
Magpul MBUS Rear BUIS, black, NIB. Asking Sold.
RRA AR pistol buffer tube. NIB. Asking Sold.
Stag mil-spec buffer tube. NIB. Asking Sold.
Stag Mil-spec aftermarket stock kit, NIB. Includes buffer tube, buffer, spring, castle nut and endplate (no stock). Asking Sold.
Stag CAR stock kit complete with buffer tube, buffer, spring, etc. NIB. Asking Sold
RRA CAR stock kit complete with buffer tube, buffer, spring, etc. NIB. Asking Sold.
CAA CAR stock kit complete with buffer tube, buffer, spring, etc. plus adjustable cheek piece and mag holder. NIB. Asking Sold.
Magpul MOE stock, NIB. Mil-spec, black, stock only. Asking Sold.
Magpul CTR stock, NIB. Mil-spec, black, stock only. Asking Sold.
Millet 30mm 22 cal windage adjustable, matte, medium rings. NIB. Asking Sold.
RRA BCG. NIB. Asking Sold.
CMMG 22lr Drop-in Conversion Kit w/ one 10rnd magazine and one 26rnd rebuild kit. NIB. Asking Sold.
RCBS Partner Press. Used, but in good condition. Asking Sold.
Dewey aluminum cleaning rod guide for AR. Used, in good condition. Asking Sold.
Korean Mess Kit. NIB, never fired. Holds 75 individual servings of kimchi or rice. Also work well as an AK drum. Asking Sold.
Factory Sig P229 13rnd magazine rebuild kit. Used, excellent condition. Asking Sold.
Factory Beretta 92F/92FS/M9 15rnd magazine rebuild kit. NIB, 2 w/ metal, 2 w/ plastic floor plates. Asking Sold
Factory CZ75 20rnd magazine rebuild kit. Used, good condition. Very rare. Asking Sold.
Factory Springfield Armory XD-9 Sub-compact 13rnd magazine rebuild kit, NIB. Asking Sold.
GI M14 Fiberglass stock. Used, but in very good condition; no butt plate and a few small marks. Asking Sold.
RRA Mid-length Handguard. NIB. MSRP is $19. Asking Sold.
RRA R4 Handguard, double heatshield. NIB. MSRP is $26. Asking Sold.
Bushmaster M4 Handguard, double heatshield. NIB. MSRP is $45. Asking Sold.
CAR Handguards. NIB. Mfg is not certain but 90% probability is Bushmaster. Asking Sold.
DPMS Glacier Handguards. NIB. 2prs available. Asking Sold
Bushmaster barrel nut, delta ring, weld spring, handguard snap ring, round handguard cap, front sling swivel, front sight post, front sight detent, front sight spring. Take-off, never fired. Asking Sold.
Colt barrel nut and triangular handguard cap. Take-off, never fired. Asking Sold.
RRA barrel nut, delta ring, weld spring and handguard snap ring. Take-off, never fired. 2 sets available. Asking Sold.
Bushmaster (Anchor Harvey Aluminum) A3 upper receiver with BCG, CH, forward assist and port cover. NIB. Asking Sold.




http://i307.photobucket.com/albums/nn310/dachan999/Sales%20Sept%2021/BurrisTripler.jpg

dachan
09-16-2009, 9:09 PM
http://i307.photobucket.com/albums/nn310/dachan999/Sales%20Sept%2021/Rings.jpg

http://i307.photobucket.com/albums/nn310/dachan999/Sales%20Sept%2021/MoreMags.jpg

http://i307.photobucket.com/albums/nn310/dachan999/Sales%20Sept%2021/Handguards-1.jpg

Noobert
09-17-2009, 5:46 PM
Nice one, 75 rd's of Kimchi :o

Jeffu
09-19-2009, 11:03 PM
LOL

Calishnikov
09-30-2009, 6:12 PM
PM SENT

Uncle Jess
10-02-2009, 1:35 AM
pm sent. Offer on mess kit

Uncle Jess
10-02-2009, 12:38 PM
I'll take it per pm.

Uncle Jess
10-03-2009, 7:21 AM
Super smooth transaction. Buy with confidence.

mlatino
10-13-2009, 2:59 PM
pm sent

mugdava
10-14-2009, 8:42 PM
17) CAR Handguards. NIB. Mfg is not certain but 90% probability is Bushmaster. Asking $10.

18) RRA CAR Handguards. NIB. 2prs available. Asking $10/pr.


I'll take one set of each. Please PM me payment info.
_______
mugdava

762
10-14-2009, 9:48 PM
PM sent on m14 stock.

Jeffu
10-30-2009, 12:15 PM
super fast shipping!

Shane916
11-06-2009, 10:48 PM
Bump for an awesome seller

hoppin62
11-15-2009, 6:30 PM
I'll take 14 & 15 ... as per my PM.. Thanks!

hkdad
11-15-2009, 11:42 PM
pm sent

Jeffu
11-30-2009, 6:37 PM
how much is stag mil spec complete stock assembly again?

dingothang
12-10-2009, 6:00 PM
PM sent

GearHead
12-27-2009, 9:00 PM
Are you flexible on the Beretta mags? They don't cost $25 new...

dachan
12-27-2009, 11:27 PM
Are you flexible on the Beretta mags? They don't cost $25 new...

1) They are not mags, they are rebuild kits and will ship disassembled as parts for the repair or replacement of similar magazines personally owned prior to Jan 1, 2000 or for the permanent construction of 10rnd magazines

2) They are not $25 new, they are $34 new from the Beretta store, if you can get them to ship to CA, which they won't. These are new from the factory, taken from new factory pistols. Hopefully you are confusing the price with cheaper GI contract mags flooding the market after they started failing in the sand.
https://www.berettausa.com/e2wItemMain.aspx?parentID=IT00007986&parentLink=2100000084:3100001318:3100001336:310000 1452

3) Otherwise, please review Rule #4 of this forum:
4) Commenting on a post in a negative manner, called 'thread-crapping', is not allowed. Adding comments such as 'Not to thread crap but..' does nothing other then admit that you KNOW you are breaking the rules but are going to do so anyway. If you see a price that seems too high, click 'Back' on your browser and DON'T BUY THE ITEM. If no one buys an item because of the price the seller will either have to keep the item or lower the price in order to sell it.
To date thread crapping has been met with post deletion and warnings.These are being regularly ignored by either the previously mentioned 'I don't mean to thread crap..' or several other methods such as asking 'Is it like this one?' and linking to a lower priced retail site.
Thread crapping will now have a more serious consequence.
If you display a history of or penchant for thread crapping you will lose access to the Marketplace forums entirely. You will still be able to see and use the rest of forums on Calguns but you will not be able to see any of the Marketplace forums at all.

barrym66
01-02-2010, 3:53 PM
PM sent on

2) Stag Mil-spec aftermarket stock kit, includes buffer tube, buffer, spring, castle nut and endplate (no stock). NIB. Asking $55.

Thanks!

highpowermatch
01-20-2010, 3:38 PM
pm on Factory Beretta 92F/92FS/M9 15rnd magazine rebuild kit. NIB, metal or plastic floor plates. 5 available. Asking $25ea. I will take one

RangerRoy
01-27-2010, 3:17 PM
sent pm on 7.62 upper.

larryratcliff
01-27-2010, 10:46 PM
trade working on 7.62 upper. should close friday.

DREADNOUGHT78
01-27-2010, 11:14 PM
I'll take these.PM on the way.

7) Bushmaster barrel nut, delta ring, weld spring, handguard snap ring, round handguard cap, front sling swivel, front sight post, front sight detent, front sight spring. Take-off, never fired. Asking $10.

Alexthewelder
02-15-2010, 7:25 PM
Dang! I needed that barrel nut:( bump

dachan
02-15-2010, 11:29 PM
Dang! I needed that barrel nut:( bump

The RRA and Colt barrel nuts are still available.

MarCay08
03-19-2010, 10:32 PM
9) Stag Mil-spec aftermarket stock kit, NIB. Includes buffer tube, buffer, spring, castle nut and endplate (no stock). Asking $50.

11) Magpul MOE stock, NIB. Mil-spec, black, stock only. Asking $55.

are these still available? pm'd you..

Unforgiven
06-15-2010, 9:33 PM
I'll take the XD sub compact 9 13 rd rebuild kit.

kapache
07-01-2010, 11:40 AM
PM sent, on the 22LR conversion kit.

chengas
07-01-2010, 12:20 PM
I'll take this:
5) RRA barrel nut, delta ring, weld spring and handguard snap ring. Take-off, never fired. 2 sets available. Asking $12/set.


Both sets

Ishoot
07-01-2010, 8:39 PM
pm sent