PDA

View Full Version : Glock firing pin and ejector


D53
08-17-2009, 11:20 AM
So while cleaning my Glocks the other night I noticed that the firing pin on my Glock 22 has a small disfigurement close to the tip of the pin, it fired fine and fired everytime, just wondering if I should pick up another firing pin or just run this one since the mark wont effect the integrity of the firing pin itself. Pics * and **

Adn the *** pic is a picture of my Glock 19's ejector. I have noticed that my Glock 22 has a straight one and same with my Glock 27. But my Glock 19s has a bend in it. I bought it new and honestly cnt remember if it came that way or I damaged it some how.


*
http://i388.photobucket.com/albums/oo321/cmb5383/Gun%20tech/firepins1.jpg

**
http://i388.photobucket.com/albums/oo321/cmb5383/Gun%20tech/firepin2.jpg

***
http://i388.photobucket.com/albums/oo321/cmb5383/Gun%20tech/g19ex.jpg

savasyn
08-17-2009, 11:25 AM
can't say about the firing pin, but the 9mm ejectors are bent from the factory as the rounds are a smaller diameter. You are gtg on the ejector.

D53
08-17-2009, 11:33 AM
can't say about the firing pin, but the 9mm ejectors are bent from the factory as the rounds are a smaller diameter. You are gtg on the ejector.

thats good to know, thanks for the info. :thumbsup:

hybridatsun350
08-17-2009, 12:12 PM
The ejector looks normal to me, and if the gun continues to shoot fine than I wouldn't worry about the striker.

JohnnyG
08-17-2009, 12:38 PM
+1 on the ejector. Definately normal for a 9mm.

I'll try to remember to disassamble my G22 tonight and take a look at the firing pin. I'm thinking what you posted looks normal, but not sure yet.

John

Mstnpete
08-17-2009, 12:46 PM
I have placed 30,000 rounds on some of my competition Glocks.
The only thing that needs replacing is the extractor because sometimes they do crack from wear. Glock strikers will last forever. It's the aftermarket stuff that breaks easily!