PDA

View Full Version : GLOCK 19 IWB Milt Sparks VMII holster Sacramento.


derek@thepackingrat.net
07-23-2009, 2:31 PM
GLOCK 19 IWB Milt Sparks VMII holster. Black. Broken in. $120. Shipping extra.

mlatino
07-23-2009, 3:00 PM
Bump for an honest seller.
He's just trying to make a few bucks...

Shenaniguns
07-25-2009, 7:26 AM
I bought one of them and they are fantastic!!! :mnl:


And the seller is 'somewhat honest' j/k :D

derek@thepackingrat.net
07-26-2009, 10:24 AM
bump

ronas
07-27-2009, 12:08 PM
What is the trigger and hammer pin size?

Shenaniguns
07-27-2009, 12:23 PM
What is the trigger and hammer pin size?


PM'd back, this set only fits the smaller .154 pin set...

Shenaniguns
07-29-2009, 9:42 AM
bump for a good guy

derek@thepackingrat.net
07-29-2009, 1:07 PM
price modified.

45R
07-30-2009, 12:50 PM
PM sent......j/k Bump for a good guy.

tvfreakarms
08-07-2009, 1:51 AM
I wonder what lower parts kit do you need to get that would fit this trigger?
PM'd back, this set only fits the smaller .154 pin set...

tvfreakarms
08-07-2009, 2:38 AM
pm sent

price modified.

Shenaniguns
08-07-2009, 4:59 AM
I wonder what lower parts kit do you need to get that would fit this trigger?

I'm using a G&R but I'm sure most lower kits will work fine.

tvfreakarms
08-07-2009, 11:45 AM
By the way I read that the Geissele needs to be broken in and lubed up. Is this true? Where and how often do you need to lube it up? And how long is the break in period?

I'm using a G&R but I'm sure most lower kits will work fine.

Shenaniguns
08-07-2009, 11:48 AM
By the way I read that the Geissele needs to be broken in and lubed up. Is this true? Where and how often do you need to lube it up? And how long is the break in period?


There is no break in period and I just lube as needed.

derek@thepackingrat.net
08-07-2009, 11:52 AM
By the way I read that the Geissele needs to be broken in and lubed up. Is this true? Where and how often do you need to lube it up? And how long is the break in period?

They send you a small vile of lube and instructions on the up keep. Per the instructions:
"Maintenance of the Geissele SSF/SSA consists of occasionally placing a drop of oil on the slides of the disconnectors where the pin slides through and also on top of the hammer springs where the coils meet the receiver wall. Grease lubrication on the hammer/trigger sear and disconnector face is mandatory for break in and strongly recommended thereafter. At every detail cleaning, dab a small amount of grease on the sear (hook) surfaces of the hammer and trigger and also on the hammer tail and face of the disconnector. Although any grease may be used the recommeded grease is mobil #28 which can be purchased from aviation supply houses. If grease availability is problematic, oil can be substituted for the grease."

Cyclepath
08-07-2009, 1:09 PM
That is the same procedure I use for all my triggers - single stage or 2 stage. Grease for the high friction\sear contact points and oil on the springs.