PDA

View Full Version : Sig Sauer P220 Tool Kit


eldy
07-15-2009, 4:42 PM
Is there a list of proper punch size and any specialty tools necessary to fully take apart a Sig P220?

Maybe someone has already compiled such a list?

I'm not talking about field stripping the pistol. I want to be able to remove each individual component.

Thanks!

Miltiades
07-15-2009, 5:07 PM
I am currently teaching myself the same procedure on a Sig P220. I bought a video from Midway on disassembly of the P series Sigs for $20:

Sig disassembly video (http://www.midwayusa.com/viewProduct/?productNumber=994278)

I have been watching the section on the Sig P220 and it is very helpful. It recommends a brass hammer, a couple of small punches and a good screwdriver set. The P220 comes apart pretty readily if you know what you are doing and follow the recommended procedure.

I would also go to the Sigarms website and download the pages showing all the parts for a P220 and how they fit together.

ontmark
07-15-2009, 5:30 PM
Every thing you need can be found here.
http://www.topgunsupply.com/tools-armorer-hand-tools/index2.html

Except a block of wood with a hole in it to drive out the breach block pin.

If you’re rich here is it all

http://www.midwayusa.com/viewProduct/?productNumber=295867

sigfan91
07-15-2009, 6:56 PM
I just went to Home Depot and bought a set of punches: 1/32" 1/16" 1/8" for $8 total.