PDA

View Full Version : remington mohawk 600


1mean76
06-01-2009, 8:19 PM
I have a mohawk 600 in 22-250 the gun did not come in 22-250 but the bolt handle broke off and was just seeing how hard it would be to fix it?

ar15barrels
06-02-2009, 3:02 PM
They were soldered on.
All you need to do is clean off the excess solder and have it re-soldered back on.
Use good silver solder.

1mean76
06-02-2009, 3:25 PM
i dont have the bolt handle for it. is there a place where i can get a new one

ar15barrels
06-02-2009, 3:51 PM
i dont have the bolt handle for it. is there a place where i can get a new one

You're screwed.

Black_Talon
06-02-2009, 4:43 PM
You're screwed.

Maybe not.

A lot of folks use M-600 actions to built benchguns. They usually replace the original M-600 bolt handle with a more standard type. I'd bet that there's a whole bunch of M600 bolt handles floating around in gunsmith's shops around the country.

Another angle to try is XP-100s. XP-100s have the same bolt handle as M-600s, and it's pretty common to replace their bolt handles when building silhouette pistols.

I'd start by asking here (http://specialtypistols.infopop.cc/eve/ubb.x), either in the XP-100 Forums, or the Classifieds.

Another place to try is 6MMBR Forums. (http://6mmbr.websitetoolbox.com/)