PDA

View Full Version : CETME or HK Clone FFL??? READ!!!..Got another for $350


50 Freak
05-26-2005, 11:38 PM
So I have an itching for a CETME or a HK91 type rifle. I know you can get it if it doesn't have a pistol grip attached. If you can find a FFL willing to do the transfer for you and at the same time not rip you a new one like the $3,200 dollar Century hack jobs at the recent CowPalace show.

Anyone know of a FFL that will do the transfer here in the bay area?

bwiese
05-27-2005, 9:35 AM
50Freak...

It's hard enough finding an FFL that'll do FAL clone receivers now.

At least w/FAL clones there is a legit option of having a stripper-clip-fed, fixed10rd mag option.

The HK clones' lack of this will prob scare most FFLs off even though the rifle you speak of is indeed a Type III "by features" AW, and would be lacking the key evil feature.

Bill W
San Jose

stillbigmac
05-27-2005, 9:36 AM
I have transfered recievers...

Call or e-mail me.
510-226-7910
gunnuts@sbcglobal.net

icormba
05-27-2005, 10:14 AM
you guys gotta stop giving me these ideas!! especially with bigmac ready to help out! http://calguns.net/groupee_common/emoticons/icon_wink.gif

xsquid
05-27-2005, 10:54 AM
Originally posted by 50 Freak:
So I have an itching for a CETME or a HK91 type rifle. I know you can get it if it doesn't have a pistol grip attached. If you can find a FFL willing to do the transfer for you and at the same time not rip you a new one like the $3,200 dollar Century hack jobs at the recent CowPalace show.

Anyone know of a FFL that will do the transfer here in the bay area?

If I were to get an HK91/Cetme clone - I would look for a Springfield SAR3/8 (made in Greece w/ HK licensed machinery) or the earlier FMP G3s (same as the Greek ones but made in Portugal). Should run you in the $1200's or so. I don't believe any of the above is specifically listed as an "AW" here in CA, and it would insure you of a factory built rifle. You of course would have to have it shipped "Kalifornicated" (no pistol grip) to your FFL.

bwiese
05-27-2005, 11:26 AM
If having a gripless G3, I would be VERY careful about transporting it within CA.

I would transport the pistol grip in a separate locked case, and even at home I would have the grip locked up separately.

A crusading DA could say this was too close to being an AW even if DOJ said it's OK. You're kinda running close to a constructive possession issue. At least w/FAL clones there's a legit variant w/stripper clip feed that you could have.

The G3 clone, OTOH, really can't exist in fireable form within CA.


Bill Wiese
San Jose

50 Freak
05-27-2005, 12:08 PM
BigMac, you're the man.

I've got a PSG-1 barrel that I've been thinking of creating a PSG clone. Now to find a good receiver.

1919_4_ME
05-27-2005, 9:14 PM
Ahhhh,
Eye candy!

http://img266.echo.cx/img266/4262/g3sg1rtca6eg4cl.jpg

imported_MaxQ
05-28-2005, 8:21 AM
50 Freak - Hey, thanks for this thread. For all the times I've gone thru the CA AW guide, I've not realized that only the CETME Sporter was banned by name. What an idiot.

Wish I lived closer to BigMac...

1919_4_ME
05-28-2005, 11:35 AM
Nevermind I forgot about the 2 rule that you can have a detachable mag but none of the other evil features.

Mugwump
05-28-2005, 12:23 PM
Please be more specific, as these could apply to any centerfire rifle with a detachable magazine (M1A, Mini14, Mini30, M1 Carbine, M96, SU16) if your intentions were not good.

shooterx10
05-29-2005, 9:41 PM
For you fans of the first "Sniper" movie with Tom Berenger and Bill Zane, the SR-9TC is not banned by name. Here is one for auction on Gunbroker:

http://www.gunbroker.com/Auction/ViewItem.asp?Item=32729394

If you can find a FFL who is balsy enough to DROS one in for you without the pistol grip of course, that's another story... http://calguns.net/groupee_common/emoticons/icon_wink.gif

1919_4_ME
05-30-2005, 9:11 AM
I thought HK was banned by name. http://calguns.net/groupee_common/emoticons/icon_frown.gif

50 Freak
05-30-2005, 10:04 PM
Yeah, but I'm not talking about a HK, I'm talking about a CETME or a HK CLONE.

1919_4_ME
05-31-2005, 4:49 PM
Sure you could build a SR9TC clone or even better a PSG1 clone on a Century reciever. http://calguns.net/groupee_common/emoticons/icon_biggrin.gif

50 Freak
06-02-2005, 9:28 AM
BigMac,

Got a CETME (minus the PG) ordered and on it's way to you. whooo hooooo.

have e-mailed you.

C.G.
06-02-2005, 10:05 AM
Got a CETME (minus the PG) ordered and on it's way to you. whooo hooooo.
How much? Let us know how it shoots without the pistol grip, when you get it.

50 Freak
06-02-2005, 10:23 AM
I'm probably not going to shoot it much. It's going into the safe until I move out of this state.

pont27
06-02-2005, 10:37 AM
Hey 50, do you mind telling us where you ordered it from? I'm curious because I was thinking of maybe getting one after I finish my Vulcan AR build.

-Pont27

50 Freak
06-02-2005, 10:46 AM
Got it off an auction. Friend of mine (from out of state) let me know that he had put his CETME up for sale and I went on the auction site and won it last night.

I'll post pics when I get it.

pont27
06-02-2005, 10:52 AM
Cool. Can't wait to see the pics when you get it!

stillbigmac
06-02-2005, 11:19 AM
Ok, what kind of cetme are we talking about?

Cetme sporters are on the list by name. I will accept clones without the PG. If the piece comes in with a PG it wont get delivered w/ said grip.

50 Freak
06-02-2005, 11:22 AM
Definitely not a "CETME SPORTER". This is a postban Century (built by angry beavers) CETME.

Bling Bling
06-02-2005, 12:08 PM
Don't worry 50 Freak will probably have this for sale a week after he gets it because he'll find something else he wants this week! http://calguns.net/groupee_common/emoticons/icon_smile.gif

50 Freak
06-02-2005, 12:23 PM
Hey...........

Some people collect and trade stamps.....I just don't like stamps.

50 Freak
06-06-2005, 3:39 PM
Hey people, the guy selling me his CETME says he's got one extra for pretty much the same price. Your pistol grip will have to be sent out of state to stay legal. But the rifle can be sent to BigMac (if he wants to do anymore CETME transfers).

imported_MaxQ
06-11-2005, 8:33 AM
50 Freak - Do you know if that other CETME is still available?

50 Freak
06-11-2005, 11:02 AM
Yes, it is.

Contact Briansammo@aol.com for info

dwtt
06-11-2005, 3:15 PM
Originally posted by 50 Freak:
Got it for $325 not including shipping.

I'm probably not going to shoot it much. It's going into the safe until I move out of this state.
I'll volunteer to shoot it for you. You have to know if it's safe to shoot, after all. I mean, what if the barrel explodes on the first shot, or the trigger gets jammed and the gun goes full auto just like in the movies? You can't take that risk, let me test it out for you. http://calguns.net/groupee_common/emoticons/icon_smile.gif