PDA

View Full Version : Daniel Defense Omega 7 Seems loose...


5hundo
05-28-2009, 12:19 AM
I just put a Daniel Defense Omega 7 rail on my OLL and it seems loose. It can move a little bit by rotation and the front seems to be moving up and down about 1/8 - 1/4 of an inch.

Are these only compatible with certain gas blocks? Is there something else I'm missing?

...any help is greatly appreciated.

For the record, I "used the search button" and found nothing...

Bowser
05-28-2009, 1:51 AM
You have to tighten the 4 screws for the barrel lug with the provided wrench.

http://www.weaponevolution.com/forum/showthread.php?t=65

missiontrails
05-28-2009, 6:25 AM
Sounds like you did not read the instructions. I appoligize ahead of time if you did. It has to be the 4 allen head screws, sounds like you did not tighten them. You do the top 2 first, then the bottom 2. You only tighten them intil you feel the initial bottoming out, YOU DO NOT "CRANK" THEM TIGHT.

5hundo
05-28-2009, 9:44 AM
I managed to misplace the instructions, so this was a big help. Thanks guys!!!

missiontrails
05-28-2009, 10:15 AM
I managed to misplace the instructions, so this was a big help. Thanks guys!!!
Did you fix it? My guess is that it is ROCK SOLID now.

Jicko
05-28-2009, 10:18 AM
For the record, I "used the search button" and found nothing...

You found nothing becuz.... it SHOULD NOT be loose!!!

5hundo
05-28-2009, 10:30 AM
You found nothing becuz.... it SHOULD NOT be loose!!!

...or, because the vBulletin search feature blows. :rolleyes:

It's better now... :thumbsup:

Jicko
05-28-2009, 10:39 AM
...or, because the vBulletin search feature blows. :rolleyes:

That too.... it is a known fact that... CG's search is a "failure"... :43: use google...

Artery
05-28-2009, 12:30 PM
Phew, I was worried there for a second, I have a DD omega rail on its way. When I put mine in ill make sure to rtfm.