View Full Version : Calif series FALs

05-18-2009, 11:20 AM
On the DSA or the Enterpise Calif FALs,Can the fixed mag be changed out to removeable one later on if I move out of the state" Also is there any issue using a scope on these rifles in regards to the sliding dust cover?

05-18-2009, 11:51 AM
The CA model has a small spot weld that can be removed rather easily if you want to convert it to the original detachable magazine configuration.

05-18-2009, 12:36 PM
I bought one of the 'Ca.-Series' Austrian DSA and converted it to BB. Like mentioned above, the spot weld that sits behind the mag catch has to be removed (I used a Dremel w/ silver oxide *'chainsaw sharpening'* grinding stone); then when mag catch/bolt release assembly is re-installed, the JJPERL FAL Bullet Button shroud is screwed together with it. Since I had quite a few old pre-ban mags in the garage, I made a few 10/20's to use in it. If you want to mount a scope, the DSA XD top cover/rail needs to be installed. This is it: