PDA

View Full Version : Need a GLock Gunsmith/expert in bay area


Timsar
05-12-2009, 6:16 PM
Hi,
I have a G17 that I would like to have a 3.5lb disconnector installed on. Already have the parts, but need someone who knows how to do this, to help me install it.

Please PM me.
Tnx

hybridatsun350
05-12-2009, 6:24 PM
It's a super simple procedure, but it is probably best that it be done by someone more experienced. I'm sure someone will chime in. :)

Bryan16
05-12-2009, 6:35 PM
Might try bullseye in Marin. If they can't do it, I'm sure they could point you in the right direction.

deez
05-12-2009, 6:45 PM
See link below:

http://www.parts.cc/glock/disassembly/Disassembly1.htm

Very easy to do.

What took the most time for me was polishing my connector prior to installation, and even that only took me about 10 mins with a dremel, buffing attachment, and some Flitz. Not necessary, but I wanted my trigger as smooooooth as possible.

domokun
05-12-2009, 6:46 PM
I know Irvington Arms in Fremont, CA will do the install for you for a small fee.

Greg-Dawg
05-12-2009, 7:19 PM
"Disconnector"? Do you mean 3.5lb. connector?

Man, if you were in SoCal then I'd help you out.

I've been detail stripping my Glocks for years.

Voo
05-12-2009, 7:26 PM
Changing out the connector is amazingly simply. All that's needed is some patience and a small punch.

There is ABSOLUTELY no need to have pay ANYONE to do this for you. It's that simple.

PM if you need any additional help.

mala in se
05-12-2009, 8:29 PM
Changing out the connector is amazingly simply. All that's needed is some patience and a small punch.

There is ABSOLUTELY no need to have pay ANYONE to do this for you. It's that simple.

PM if you need any additional help.


3/32 punch i believe. you can do this. with the amount of info online and the support from calguns, arf.com, and glocktalk, you should be able to do this easily.

it's easier than you think.

good luck.

Gryff
05-12-2009, 9:22 PM
I can do it for you, but I'm not an FFL so you have to be there while I work on the gun. Process will take just a few minutes.

But it really is a disgustingly easy process. You can find step-by-step instructions here (http://www.ghostinc.com/c=a0hoZC3R4AWC6fLJe2xFPdz8q/category/istallationinstructions/). Just do steps 1-10 only, and then reverse the process for putting everything back in the gun.

And if you want to improve the trigger pull even better, do the $.10 trigger job. (http://www.alpharubicon.com/mrpoyz/glock/)

nikki#2
05-12-2009, 9:44 PM
I can do it for you, but I'm not an FFL so you have to be there while I work on the gun. Process will take just a few minutes.

But it really is a disgustingly easy process. You can find step-by-step instructions here (http://www.ghostinc.com/c=a0hoZC3R4AWC6fLJe2xFPdz8q/category/istallationinstructions/). Just do steps 1-10 only, and then reverse the process for putting everything back in the gun.

And if you want to improve the trigger pull even better, do the $.10 trigger job. (http://www.alpharubicon.com/mrpoyz/glock/)

Agreed. Do the $.25 trigger job at the same time.

I understand wanting it done FAST, but you really should learn how to do this yourself. Knowing how to change springs, connector, etc.
will really increase your enjoyment of your GLock.

I recommend ordering this video. Super good step-by-step visual instruction on how to swap the connector and everything else you need to know.
TR Graham is the best! http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=186832

kakpataka
05-12-2009, 9:49 PM
do it yourself bro!
see if these are any help!.

Trust me, I took apart my HK USP on my own and put is back with no experience so Glock would be like child's play. You will be proud of your accomplishment! Trust me, this is coming from someone who has a very hard time with tools & doent have a very steady hand.

Glock Competition Trigger Job
http://www.youtube.com/watch?v=lL_yoF5JR6c&feature=related

25 Cent Glock Trigger Job
http://www.youtube.com/watch?v=bpChV_vfgzo&eurl=http://video.google.com/videosearch%3Fq%3Dglock%2Btrigger%26hl%3Den%26emb% 3D0%26aq%3Df&feature=player_embedded

ghost
05-12-2009, 10:50 PM
talk to bigmac at irvington arms in fremont,he`s a certified glock armorer.

SFFRONTMAN
05-13-2009, 1:17 AM
Im in Daily City/ San Francisco and im a certified Glock armorer. If you want to stop by I have all the tools and can show you how to do it in about two seconds, its about the eaisest thing to do.

will227457
05-13-2009, 10:01 AM
save ur money do a search on google and do it your self......

BrokenArrow
05-13-2009, 10:13 AM
I'm a certified gunsmith for Glocks, Beretta, Sig, 1911, S&W M&Ps and S&W revolvers. If you need help. Just pass by Metco in Faifield/Cordelia. :)

Let me know if you decide to come by.

Gio
05-13-2009, 10:17 AM
I'm a certified gunsmith for Glocks, Beretta, Sig, 1911, S&W M&Ps and S&W revolvers. If you need help. Just pass by Metco in Faifield/Cordelia. :)

Let me know if you decide to come by.

+1 for Broken Arrow every Glock I've seen out of his Shop makes me cry. The Craftsmanship is off the hook :thumbsup:

-Gio

CaptainGlock
05-13-2009, 7:48 PM
Hi,
I have a G17 that I would like to have a 3.5lb disconnector installed on. Already have the parts, but need someone who knows how to do this, to help me install it.

Please PM me.
Tnx

Come to the Saturday Night Steel Shoot at the San Leandro Rifle and Pistol Range (6-10:00 PM) and I'll do it faster than Gryff can! :D (He shoots IDPA faster than I can though. :o)

Gunguy65
05-26-2009, 9:51 PM
big ron the gunsmith at canyon sports will install it free while you wait at least he did it for me. but call first he is only there thurs fri sat .

randy
05-27-2009, 12:49 AM
Glocks are super easy everybody is an expert. Do it yourself.