PDA

View Full Version : WTS: AR 15 Rear takedown Pin detent MOD ***$9.99***


malongi
01-16-2009, 1:46 PM
Thread temp closed while seller works out vendor status - no other reason than this for the closure. Thread will be re-opened once vendor status is updated.

This mod is especially handy for AR 15 pistols and rifles.

I did not invent this mod, it has been done for many years. I am simply putting all the parts together for Calgunners to enjoy.

It uses a set screw to hold in the rear take down pin detent instead of a plate in front of the buffer tube or stock.
No more worries about loosing or bending the detent spring.

I will include a High quality reusable tap tool ,2 set screws and an Allen wrench for $9.99 shipped. Additional set screws can be ordered for an additional $.25 each. For PayPal please add $.65

"Photos Courtesy of Quarterbore"

Using the tap tool and some oil, thread it in making the threads.
http://i695.photobucket.com/albums/vv312/asiarms/ar-15detentspringfix-002.jpg
This is how it should look.
http://i695.photobucket.com/albums/vv312/asiarms/ar-15detentspringfix-003.jpg
You need to remove about 1/8" off the spring... only a few coils.
http://i695.photobucket.com/albums/vv312/asiarms/ar-15detentspringfix-004.jpg
Using a small set screw.
http://i695.photobucket.com/albums/vv312/asiarms/fcde_1.jpg
Insert screw.
http://i695.photobucket.com/albums/vv312/asiarms/ar-15detentspringfix-009.jpg
Finished product...now you do not have to worry about changing stocks or using a plate for AR 15 pistols and rifles.
http://i695.photobucket.com/albums/vv312/asiarms/ar-15detentspringfix-010.jpg
$9.99 includes a high quality reusable tap, 2 set screws and an Allen wrench. Shipped. Please add $.65 for PayPal.

Peter W Bush
01-16-2009, 2:10 PM
ill take one.. PM sent

mvpatriot
01-16-2009, 2:25 PM
4-40 tap correct?

malongi
01-16-2009, 3:14 PM
Item shipped to Peter W Bush.
I still have a few left.

malongi
01-17-2009, 4:36 AM
BTT

dollfinn99
01-17-2009, 2:23 PM
:cool2:Do you have 5 kits left? If so how much?

Peter W Bush
01-17-2009, 3:06 PM
got mine in the mail today... a whole 22 hours after i paid for it!

Nine
01-18-2009, 7:48 AM
2 PM sent

malongi
01-18-2009, 8:01 AM
PM responded to Nine

malongi
01-18-2009, 8:49 AM
5 Kits sold to Nine. I still have more kits left.

adgrimm03
01-18-2009, 8:56 AM
pm sent

GMG
01-18-2009, 11:56 AM
PM sent.

doughboy334
01-18-2009, 12:12 PM
Nice work! Although I don't change stock types very often, the next time I spend precious time looking for the detent spring on the floor when it falls out I'll think of this product lol

Agro
01-20-2009, 1:44 PM
I'm in for one. PM me the 411

Steve O
01-21-2009, 10:21 PM
pm sent.

Kestryll
01-23-2009, 9:32 PM
And that should do it for the thread crapping.

Seesm
01-24-2009, 12:23 AM
4-40 tap correct?

Not trying to be a punk but he is "selling" kits why would he tell you what the sizes are?

Tell you so you can go around him and do it yourself?

It's only $15 bucks... I do not even have my ar build started and I think I will buy one just cuz it's a "start" :)

Heck and I own a machine and fabrication shop I could figure it out..

But he got it all ready to go no brainer for us...

Thanks OP!!

mvpatriot
01-24-2009, 4:36 PM
My apologies to the OP for my post regarding the tap size, thread crapping was not my intention.
Seesm, FYI there are folks out there such as myself who already have a tap/die set and allen screws, but if you would like to buy a set for me from the OP I will gladly PM you my shipping address :thumbsup:

Seesm
01-24-2009, 5:23 PM
My apologies to the OP for my post regarding the tap size, thread crapping was not my intention.
Seesm, FYI there are folks out there such as myself who already have a tap/die set and allen screws, but if you would like to buy a set for me from the OP I will gladly PM you my shipping address :thumbsup:

Yeah me too... but again... it was thread crapping and we all do it by mistake sometimes but anyway.

cedricxerxes
01-28-2009, 10:35 AM
PM sent.

malongi
01-28-2009, 11:21 AM
Items have been sent to CEDRICXERXES
Still have a few left.

malongi
02-03-2009, 8:58 AM
Only 3 left

Kestryll
02-03-2009, 3:08 PM
And that should do it for the thread crapping.

Just in case anyone missed it earlier...

This makes twice, third time starts looking like baseball...

malongi
02-07-2009, 7:16 PM
Bump

Jwood562
02-07-2009, 9:17 PM
Price raise???

malongi
02-08-2009, 12:06 AM
Price reduction!

Wombat25
02-08-2009, 8:30 AM
Just ordered one. Thanks malongi!

malongi
02-09-2009, 4:36 PM
BTT

DREADNOUGHT78
02-09-2009, 7:18 PM
Any left??????

malongi
02-09-2009, 9:16 PM
Yes

MKE
02-10-2009, 12:13 AM
I'll take one...pm me your paypal info.

Jesse996r
02-11-2009, 3:56 AM
I will take one, plus 6 more screws.... PM me your email for PP

malongi
02-11-2009, 3:58 PM
TTT

Jesse996r
02-11-2009, 9:41 PM
payment sent...

malongi
02-12-2009, 7:09 AM
All kits are sent. I will be putting some more together.

malongi
02-13-2009, 10:34 AM
Added credits to Quarterbore for the excellent photographs.

sevensfaze
02-13-2009, 12:30 PM
Wondering if you can perform this mod on the carbon fiber platform Bushmaster carries. Would you be able to tap it the same?

malongi
02-13-2009, 12:41 PM
sevensfaze,
I know that carbon fiber is very durable and if it were mine I would. However I am not qualified to make that call.
Marty

Jesse996r
02-13-2009, 8:24 PM
Got mine today.... Thanks for the fast shipping. Free Bump

malongi
02-14-2009, 4:32 PM
Valentines Day bump

flipper13
02-15-2009, 1:34 AM
Have any left?

malongi
02-15-2009, 7:04 AM
Yes, I put some more together.

malongi
02-16-2009, 9:19 AM
BUMP

malongi
02-17-2009, 2:46 PM
I have 15 more kits for sale.

Eroland7
02-17-2009, 10:19 PM
I'll take one. pm in process...

bigbob76
02-18-2009, 6:17 AM
I'll take one with 5 extra screws, via paypal.

malongi
02-18-2009, 11:31 AM
All kits ordered have been shipped. Enjoy
Still have some left.
Thank You, Marty

sjpd
02-18-2009, 12:41 PM
I'll take 1 set...PM sent.

malongi
02-19-2009, 4:21 PM
Bump

rumble phish
02-19-2009, 4:43 PM
I'll take two kits.

PM sent...

malongi
02-20-2009, 4:37 PM
All kits are shipped. I still have some left.

norcal-ar
02-20-2009, 5:59 PM
pm me your paypal info. ill take one of the 7.99 kits and 5 extra screws to make an even $10.00

malongi
03-01-2009, 8:27 AM
I have put together some more kits and they are ready to ship.

malongi
03-04-2009, 8:14 PM
I have 5 left.

1919A4
03-04-2009, 8:17 PM
I will take one with 10 extra screws. I will pay with paypal. Can you send me a total please with your address you would like the paypal payment sent to.

malongi
03-05-2009, 7:55 PM
All kits shipped.

Rukus
03-07-2009, 8:52 PM
pm sent

hkdad
03-08-2009, 1:22 AM
i'll take one... pm to follow

malongi
03-09-2009, 5:17 PM
BTT

1919A4
03-09-2009, 9:29 PM
I got the items ok today, Thanks a million. Over the last 25 years of building AR's I swear I have lost or bents as least 3-4 of them darn springs.
Thanks again

hkdad
03-12-2009, 12:43 PM
received mine today! :thumbsup: free bump!

malongi
03-12-2009, 4:17 PM
Bump

IMC87
03-12-2009, 8:39 PM
anyone local to Whittier that can install this for me if i were to purchase one?????

malongi
03-13-2009, 8:11 AM
If you want to come to Huntington Beach I will install it for you.

malongi
03-31-2009, 5:02 PM
***

DWarner
03-31-2009, 5:09 PM
If still available, I'll take a kit and 6 extra set screws. PM sent.

malongi
04-09-2009, 7:13 PM
Just made more kits. Ready to ship!

ercraw
04-10-2009, 11:07 AM
On another forum, you have DPMS and Mod kit combo available for purchase, this is as of a few months ago. Do you still have these kits available or merely the Mod kit?

brummy
04-15-2009, 8:31 AM
I'd like a kit and Four extra screws
Thanks Russ

malongi
05-04-2009, 8:50 AM
:62:

bombadillo
05-04-2009, 9:00 AM
could you just send me 20 set screws and I'll paypal you 6 bucks??

malongi
05-04-2009, 10:49 AM
Yes, I will sell the set screws only.

bombadillo
05-04-2009, 10:53 AM
Nevermind, I found 50 of them for dirt cheap so I won't need them afterall. Thanks though. If I need more, I'll hit you up.

malongi
05-12-2009, 9:23 PM
:66:

glock_this
05-16-2009, 3:58 PM
pm sent for 1 kit + 1 extra screw

Thanks.. just added this mod to 2 lowers. took about 5 minutes per. go slow and test depth, go slow and test depth until perfect. used some 3-in-1 oil.

Flying Bones
07-02-2009, 11:44 AM
Have you tried this with selector???

Jwood562
07-02-2009, 1:23 PM
the safety selector spring goes deep into the pistol grip. I gues if you wanted to try it and cut up the selector spring really really short, but I do not think there is enough room for the detent, spring and set screw under the safety selector in the lower

bluebum
07-16-2009, 12:52 PM
any kits left? PM sent

LAKA90034
07-24-2009, 5:31 PM
IF you have kits left I will take one with 4 extra set screws...

MetalGod
08-09-2009, 5:18 PM
Do you have any kits left? Please email me if you do and I'll send a paypal for one kit with 2 extra set screws.

DC2ner
08-09-2009, 11:59 PM
PM me your paypal info if you still have a kit + 2 extra set screws left.

scarry scarney
08-10-2009, 6:49 AM
I'll take a kit, with 4 extra screws. Check your paypal. PM sent with details.

ar-dude
08-10-2009, 7:58 AM
ill take one pm on the way

Linus
09-17-2009, 9:01 PM
Are these kits still available?
If they are PM me Paypal payment details.

bigboy
09-21-2009, 8:55 PM
ill take 1 kit and some extra screws.

bigboy
09-21-2009, 9:01 PM
pm sent

malongi
09-22-2009, 3:46 PM
More kits are avaliable.

JPurp
10-04-2009, 11:13 AM
I will take a kit with 4 extra screws.

PM with paypal payment info.

djerikd
10-04-2009, 11:27 AM
I too will take a kit with 3 extra screws. Please PM paypal info.

hkdad
10-04-2009, 11:35 AM
i just need 4 extra screws. how much shipped to 91381? pls send paypal info.

MikeR
10-04-2009, 12:44 PM
i need a kit and 5 extra screws please PM total and PP address.

EKIM
10-13-2009, 2:41 PM
Got my kit today, thanks.

LasVegasTaxMan
10-25-2009, 7:16 PM
Payment sent for one kit and an extra 4-5 screws thanks.

malongi
10-29-2009, 8:21 PM
More kits avaliable

farrsp2270
11-06-2009, 3:59 PM
I would like a kit with four extra screws. Please PM with PP info. Thanks

Grump
11-08-2009, 7:28 PM
malongi, please PM your Paypal info. Thanks!

mattmer
11-15-2009, 12:14 PM
I'll take a set, w/10 screws. This is a slick idea! pls send paypal info and total shipping to 74006.

MattGinOK.

Cur
11-18-2009, 3:44 PM
I'll take a set please, shipping to 01879!
PM me the PP info, please.
Thanks!

malongi
11-21-2009, 4:21 AM
More kits are available

glock_this
11-29-2009, 10:35 AM
already got kit and used my screws, I just need 1-2 more darn screws, what are my options? you can PM if you want

malongi
11-30-2009, 6:40 PM
I will mail the additional screws today. When you receive them please send me a check to cover the allen screws and postage.

Standard
11-30-2009, 7:45 PM
Any option of adding the spring with the kit? I kind of mangled mine.

malongi
11-30-2009, 7:48 PM
You can add $1.50 for the spring.

glock_this
12-01-2009, 9:11 AM
I will mail the additional screws today. When you receive them please send me a check to cover the allen screws and postage.

agreed. thanks

aermotor
12-02-2009, 11:10 AM
Great seller, super fast shipment, thanks!

malongi
12-19-2009, 3:52 PM
:46:

HonorThe2nd
12-19-2009, 6:53 PM
PM Sent

HonorThe2nd
12-20-2009, 11:37 AM
Payment sent

Bigballaizm
12-20-2009, 12:51 PM
Any left please?

Sillyguy
12-21-2009, 12:49 PM
yes, any left? :D

malongi
12-21-2009, 8:53 PM
Yes, I have kits avaliable.

gadgetguy1288
12-30-2009, 7:05 PM
Do you know if this will work on the rear take down pin detent spring on the S&W 15-22? I want to put a Miad grip on mine but the Miad doesn't cover the extra hole where the spring should be.

Thanks
Randy

Dee_NY
12-30-2009, 9:32 PM
If still available I'll take one kit + 4 additional set screws, please send me your paypal info, thanks and happy new year.

thetaxguy
12-31-2009, 7:41 AM
PM sent

wooward
12-31-2009, 10:54 AM
PM sent. I'll take a kit with 4 additional set screws.

malongi
01-01-2010, 8:27 PM
Happy New Year All!

malongi
01-07-2010, 7:12 PM
Just finished 50 more kits and ready to ship!

Sleepsnoors
01-07-2010, 7:54 PM
Hey Malongi, thanks for your quick reply to personal email.

Sleepsnoors
01-09-2010, 11:10 PM
Hey mines came in the mail today. Can't wait to install these bad boys. Thanks again for the fast shipping!

malongi
01-21-2010, 8:54 PM
More kits now avaliable.

Citizen711
02-02-2010, 7:01 PM
PM sent.

dakewlndn
02-04-2010, 11:51 AM
PM Sent also for a Set and 4 xtra screws

malongi
03-03-2010, 10:20 PM
I have more mod. kits avaliable.

lugee
03-09-2010, 3:01 PM
Thanks.

m249saw
03-25-2010, 4:02 PM
Just PMed you for a set plus 4 extra allen screws.

Thanks again for doing the legwork.

mig79
03-25-2010, 4:41 PM
I also need more set screws... pm to follow
ETA: payment sent

OC_Mike
03-25-2010, 4:42 PM
I'll take one with a couple of extra screws.

Can we meet some where in the OC?

PM Inbound.

m249saw
04-02-2010, 11:25 AM
Any chance my package made it out? :)

L4D
04-02-2010, 1:18 PM
in-stock? im interested in a set.

jeferd
04-23-2010, 1:05 PM
Do you still have these...I would like to buy a set

messione
04-23-2010, 1:37 PM
Ill take 1 kit with 6 extra allen screws, Pm heading your way

OneApart
04-24-2010, 2:35 PM
:Ivan: I'll take one, PM sent.

1HOTV2
04-24-2010, 3:26 PM
I'll take a kit with 6 extra set screws. PM me your PayPal info.

malongi
06-01-2010, 10:56 PM
More kits in stock. :13:

wayoutwest
06-02-2010, 8:37 AM
In for one....PM will follow

cptdean
07-04-2010, 9:34 AM
I'll take a kit with 4 extra screws. PM sent.

TurboChrisB
07-13-2010, 8:39 AM
I'm in.....PM sent

TurboChrisB
07-26-2010, 2:05 PM
Hmmmm, he's not been on all month and not returning pm's...anybody know if he's still around?

TurboChrisB
07-28-2010, 2:52 PM
OK, contact made and payment sent...thanks Marty.

silaic7
09-27-2010, 1:48 PM
is this still available?

tast101
10-26-2010, 7:57 PM
are you still putting kits together?

malongi
10-26-2010, 10:07 PM
Yes, I have kits for sale!

blazing
10-29-2010, 7:14 PM
can u pm me price and shipping info for 1 kit with 4 extra set screws and springs.

bubbapug1
10-29-2010, 7:30 PM
you gotta ask yourself,,,,why don't all AR's come equipped with this retrofit??

Nice idea :laugh:

only10x
10-29-2010, 10:02 PM
tag

parakid
10-30-2010, 4:05 PM
I u have 1 kit and 4 xtra set screws and 2 springs if u could pm me with price and paypal info thanx adam

unknownhavoc
11-05-2010, 9:36 AM
Ordered a kit several days ago, eagerly awaiting arrival!!

Thanks again Malongi!!

unknownhavoc
11-10-2010, 2:54 PM
Been 11 days and I'm still waiting on my kit...

unknownhavoc
11-15-2010, 11:39 AM
16 Days and nothing. Is this guy legit...?

mig79
11-15-2010, 12:04 PM
I've ordered from him twice, fast delivery.

only10x
11-15-2010, 3:50 PM
i dont feel so bad.. its only been a week for me :D
no worries guys. im sure life got in the way of his shipping.

robbie2883
12-14-2010, 1:36 PM
anyone received their kits? i was just about to order a couple.

ColViper
12-14-2010, 2:31 PM
PM Sent if you still have any left.

malongi
12-14-2010, 4:32 PM
Kits are ready to ship!!

itsjus10
12-15-2010, 12:20 AM
PM'd

SpenceUSM
12-30-2010, 8:11 AM
Do you have any more kits - If I wanted one with two springs additional how much? Great idea.

G38xOC
12-30-2010, 2:24 PM
where in OC u located ? can this transaction made FTF ?

SpenceUSM
01-05-2011, 4:35 AM
Please check PM and let me know.:cheers2:

SpenceUSM
01-10-2011, 2:43 PM
any update Malongi? I sent $ via paypal and have not heard from you thru a PM. I know you are busy but next time you log on just drop me a note that its on the way ok?

SpenceUSM
01-20-2011, 1:51 PM
please check PM. It has been some time now and I hope you see this and respond soon.

nikolavitz
01-20-2011, 4:57 PM
I'll take 1 too! PM sent.

nikolavitz
01-20-2011, 5:03 PM
I'll take 1 too. PM sent.

cujocali
04-01-2011, 8:20 PM
Do you still have kits available?

dukehatch
04-01-2011, 9:21 PM
Any more kits available

the governor
03-21-2012, 4:05 PM
Damn this is an amazing deal. I drove to four different hardware stores today for these items and I still don't have them all. I've spent more on gas than you charge for the entire kit.

eville
03-21-2012, 4:09 PM
if these aren't for sale, can someone confirm the tap is 4-40
thanks.

malongi
11-10-2012, 9:12 PM
BTT

Zeroten
11-11-2012, 8:44 AM
here's some good info on this mod from Supersonic

http://www.calguns.net/calgunforum/showthread.php?t=109301

malongi
11-11-2012, 10:24 AM
BTT

malongi
11-13-2012, 2:55 PM
Made more kits today

malongi
11-14-2012, 4:13 PM
BTT

malongi
11-15-2012, 4:36 PM
BTT

malongi
11-16-2012, 4:43 PM
Never loose or smash a spring again.

malongi
11-17-2012, 6:54 PM
Great gun show in Glendale this weekend!!

malongi
11-18-2012, 7:32 PM
BTT

malongi
11-20-2012, 4:26 PM
BTT

malongi
11-22-2012, 6:32 AM
Happy Thanksgiving everyone!!!

malongi
11-23-2012, 8:48 PM
Hope you all had a great Thanksgiving!!!

malongi
11-26-2012, 3:23 PM
I put together 50 more kits today and they are ready to ship.

malongi
11-26-2012, 3:34 PM
I put together 50 more kits today and they are ready to ship.

malongi
11-28-2012, 5:46 PM
BTT

jfifer
11-28-2012, 5:56 PM
I would like to say i habe done this to all my rifles and this kit is a great deal. Drive all over or wait days for the parts in amounts you dont want or get this kit for one low price. Free bump dude.

malongi
12-04-2012, 5:28 PM
Thank You fiferronald!!!

jremmy2480
12-05-2012, 12:46 PM
Ill take one. Pm sent!

malongi
12-07-2012, 8:15 PM
BTT