PDA

View Full Version : HK 91 Parts Kit - Complete


Guncrank
11-10-2008, 10:47 AM
I have an Parts Kit for an HK 91 complete - This kit is from a clone rifle I have pre-ban I have turned into a parts kit with a saw. I know there is someone out there looking to build a OLL PTR rifle. The price is $700.00

Guncrank
11-10-2008, 10:56 AM
Oops - Forgot a few things - This kit is in the Contra Costa County area and complies with State Law as this is a parts kit and is not a firearm. I have 2 complete sets of stocks included (Slim Handguard Wood set and Wide Handguard Synthetic set). There is no magazine included in this parts kit.

Xerxes
11-10-2008, 1:43 PM
I have an Parts Kit for an HK 91 complete - This kit is from a clone rifle I have pre-ban I have turned into a parts kit with a saw. I know there is someone out there looking to build a OLL PTR rifle. The price is $700.00

You destroyed your rifle?

Can we at Calguns ask...


.......what, pray tell, ever came over you to do such a thing?:eek:

Was your mind possessed by Obama Witch Doctors with voodoo curses?:confused:

What are you going to do when the zombies come to your house to eat your brains? You know that's the reason there is a Calguns so we can build up are arsenals to repel the zombies when they come.

We just did not know they were coming so soon and the lead zombies name was not BARK BARK like the dog Barack, not Saddam but still a Hussein, not Osama but sounds like it is Obama.

Some one please buy this and turn it back into a gun before it is to late and the zombies come to get us!

forgiven
11-10-2008, 4:41 PM
You destroyed your rifle?

Can we at Calguns ask...


.......what, pray tell, ever came over you to do such a thing?:eek:

Was your mind possessed by Obama Witch Doctors with voodoo curses?:confused:

What are you going to do when the zombies come to your house to eat your brains? You know that's the reason there is a Calguns so we can build up are arsenals to repel the zombies when they come.

We just did not know they were coming so soon and the lead zombies name was not BARK BARK like the dog Barack, not Saddam but still a Hussein, not Osama but sounds like it is Obama.

Some one please buy this and turn it back into a gun before it is to late and the zombies come to get us!

:iagree:

jamesob
11-10-2008, 7:14 PM
im speechless, for a few reasons.

Guncrank
11-10-2008, 10:24 PM
OK Gents - I take the lashing and thrashing I have coming to me - I did in the Cal Guns unspeakable - but in my defense it was years before the Messiah even appeared on the horizon. The rifle was deemed black and evil by the lords in power here in our state of marxist rule and I for legal reasons could not risk having a such a contraband device of the devils so I chose to make it a legal pile of parts to someday convert back into a legal rifle again.:kest:
I know this may have been in haste and not what I might do again, but the fact remains - she is all I have (Plus a couple M1A's - for Zombie Erratication:43:). So Ladies and Gentlemen of Cal Guns - I stand guilty before you, but willing to release this wonderful bin of parts to a willing sole (Buyer) - so pony up and let's see the rifle become whole again!:D

Wcoldnav
11-10-2008, 11:55 PM
how about some pics of the hack job?

kmm16
11-11-2008, 7:57 AM
PM sent.

Guncrank
11-11-2008, 9:48 AM
I would post pics - but I am obviously new to this whole Cal Guns thing and I don't know how. It says I can't post attachements :(

Tumerboy
11-11-2008, 10:05 AM
upload pics to photobucket, flickr, etc., post links to said uploaded pics.

Guncrank
11-11-2008, 12:01 PM
Got it - Thanks

Here are a couple of photos before the hack job.

http://i407.photobucket.com/albums/pp154/guncrank_photos/HPIM1990.jpg
http://i407.photobucket.com/albums/pp154/guncrank_photos/HPIM1991.jpg

The reciever is cut into 3 pieces behind the mag well

Powder Horn
11-11-2008, 1:11 PM
What is the brand of your clone?

Guncrank
11-11-2008, 1:22 PM
The reciever was a Hesse Model H91

Powder Horn
11-11-2008, 1:29 PM
What is the brand of the rest of the parts (barrel, grip assembly, etc.)?

Guncrank
11-11-2008, 1:41 PM
Bolt is marked "FMP 4/69" the Barrel is marked "IBLX" and the trigger group doesn't have any markings except the serial #s and the numbers are not matching

Guncrank
11-11-2008, 4:12 PM
OK - I have gotten much more response than I thought I would on this thing - so here is the picture of it all, the description of the parts and I also have some mag rebuild kits available for this model kit.

http://i407.photobucket.com/albums/pp154/guncrank_photos/HPIM1997.jpg

Here is a listing of everything included:
Barrel and trunion assembly with front sight and pressed on muzzle break (CA Legal)
Semi Auto Converted Trigger Group
FMP Bolt
Stock Magazine Release
Rear Sight Unit
3 Rear Stocks (1 Wood, 2 Synthetic - all good cond)
3 Forends (1 Wide Synthetic, 1 Thin Synthetic and 1 Wood)
3 Hand Grips
3 Forend Pins
5 Rear Stock Pins
1 Spare Hand Grip Screw
B Square Claw Scope Mount
1 Leather Sling


Magazine Rebuild Kits Available While They Last

5 Original German 20 Rd Bodies (steel) with floor plates springs and followers $30.00
1 Original German Aluminum 20 Rd Body with floor plate, spring and follower $30.00
2 After Market 30 rd bodies (steel) with floor plates, springs and followers $25.00

Xerxes
11-13-2008, 1:52 AM
upload pics to photobucket, flickr, etc., post links to said uploaded pics.


Agreed,

Your price is proud,

But we now have a gun grabber, burn the constitution, but gay marriage is OK so do not ban it, but I don't beleive in that stuff, because I now have a harem of 20 year old interns wanting sex with me that are white-blue eyed-blonde- on the outside but juicy pink on the inside (oh thank you Bill C. for letting me know I can get all I want as president! so that is why I ran in the first place!) so maybe the price is reasonable because of the times or what you have, but a pic is worth a thousand words-and one page on a thread is about 300 words-so that is 3 pages of typing to explain what you have. Hope your fingers are up to it......or just post some friggin pictures.....for crying out loud.:p

missiondude
11-13-2008, 9:53 AM
Love the wood stocks. Man those pics take me back to the 80's when I had a real 91 with every toy known to man except the "special" trigger. Shoulda kept it and registered it, but gun registration seemed sooooo wrong on many levels, so I sold it to a Marine who was leaving Kali...

Someone save this.

Dave

Guncrank
11-13-2008, 3:52 PM
Thanks for all the responses - I have a buyer for the 5 Steel 20 rd mags and a few trades and offers pending on the kit. The kit is still officially available along with the two 30 rd rebuild kits and one 20 rd rebuild kits. Thanks for staying tuned -

Guncrank
11-13-2008, 6:08 PM
One more update the magazine rebuild kits are priced each (ie: $30.00 for each Steel Mag Kit). The 5 Steel Mags are still available (All are still available).

I have heard some crud about the reciever being a Hesse and this disinteresting some. The kit is a Portugeese rifle kit (FMP Bolt) according to my Gun Guru here in Martinez (Kevin Smith - Great FFL Guy with WASR Rifles in Stock!). The reciever is gone and no more Hesse - that is Hesse not HEX!

darkest2000
11-13-2008, 8:55 PM
LOL! There is a god afterall.

At first I thought you had destroyed a "pre-ban" (import ban) HK91 clone, i.e. a FMP/SAR8/HK/etc which are worth thousands now.

Anything that's made by Hesse deserves to be chopped up because they're pretty much regarded as junk. In fact you might even be able to get more $$ out of it by selling as parts kits then as a complete Hesse H91.

With that said Hesse H91s are actually offlist and can be made into CA legal configurations simply by adding a raddlock. Next time you chop up something you should check here first.


The reciever was a Hesse Model H91

Guncrank
11-14-2008, 12:28 PM
Here is a photo of the mag kits

http://i407.photobucket.com/albums/pp154/guncrank_photos/HPIM0003.jpg

maurice05
11-14-2008, 7:11 PM
How much for the wide forend and stock, please respond by Private messgage if your willing to part

Guncrank
11-16-2008, 7:02 PM
Ok Ladies and Gents - The Parts Kit is sold and the Mag Kits are still available. Right now I have one person Interested in the mag kits so PM me to seal the deal. Thanks for all the response.