PDA

View Full Version : WTS: WOA 1/7 16" midlength / Vtac upper / Youngs chrome BC [all separate]


Sleepnosis
10-19-2008, 8:57 PM
I am selling a Black powdercoated Stainless Steel White Oak Armament M4 barrel that I bought through Denny at Global Tactical and had on a Recce build. The barrel has had less than 500 rounds through it.

Specs:
Powder Coated Black Stainless Steel 16” barrel
Medium Contour
1/7 Twist Rate
Midlength Gas Port [NOT carbine]
M4 Feed Ramps
Fluted from the gas block to the muzzle

http://i61.photobucket.com/albums/h74/MishelleLeQuebec/PA130463.jpg

Note: There are a couple pinhead size spots where the powder coat has come off from dinging during installation and what have you. Without close inspection you wont see them. They are so miniscule that it is probably a non-issue but I want to advertise correctly.

WOA barrel with LaRue Lo-Profile gas block: SPF- Pinto
Next up:
Young’s Manufacturing bolt carrier with bolt with less than 500 rounds of use.
It has a heavier weight and tighter tolerances than similar BC’s. Chrome plating allows carbon to wipe right off.

Youngs Match Bolt Carrier with CMT bolt: SPF - Rastro


Last: my VTAC handguards and including the stripped upper. These have seen no hard use but have a few range bumps and nicks here and there. The handguards mounting system has been held in place by red loctite. Heat gun should do the trick to remove if that’s your desire.

Rifle Length VTAC
(4) Four 2” Rail Attachments [2 mounted/ 2 in baggies]
CMT upper
http://i61.photobucket.com/albums/h74/MishelleLeQuebec/PA130465.jpg
CMT stripped upper + VTAC + rails = SPF - Adam

Thanks,
USMCPetito@yahoo.com

Cypriss32
10-19-2008, 9:46 PM
If that upper, rail system and rails are for 150.00 Its mine PM coming your way!

rastro
10-19-2008, 9:57 PM
I'll take the Young's Mfg. BCG for $135.

I am selling a Black powdercoated Stainless Steel White Oak Armament M4 barrel that I bought through Denny at Global Tactical and had on a Recce build. The barrel has had less than 500 rounds through it.

Specs:
Powder Coated Black Stainless Steel 16” barrel
Medium Contour
1/7 Twist Rate
Midlength Gas Port [NOT carbine]
M4 Feed Ramps
Fluted from the gas block to the muzzle

http://i61.photobucket.com/albums/h74/MishelleLeQuebec/PA130463.jpg

Note: There are a couple pinhead size spots where the powder coat has come off from dinging during installation and what have you. Without close inspection you wont see them. They are so miniscule that it is probably a non-issue but I want to advertise correctly.

WOA barrel with LaRue Lo-Profile gas block: $350 OBO

Next up:
Young’s Manufacturing bolt carrier with bolt with less than 500 rounds of use.
It has a heavier weight and tighter tolerances than similar BC’s. Chrome plating allows carbon to wipe right off.

Youngs Match Bolt Carrier with CMT bolt: $135


Last: my VTAC handguards and including the stripped upper. These have seen no hard use but have a few range bumps and nicks here and there. The handguards mounting system has been held in place by red loctite. Heat gun should do the trick to remove if that’s your desire.

Rifle Length VTAC
(4) Four 2” Rail Attachments [2 mounted/ 2 in baggies]
CMT upper
http://i61.photobucket.com/albums/h74/MishelleLeQuebec/PA130465.jpg
CMT stripped upper + VTAC + rails = 150.00


Thanks,
USMCPetito@yahoo.com

40caldeserteagle
10-19-2008, 10:00 PM
If that upper, rail system and rails are for 150.00 Its mine PM coming your way!

If he doesn't take it, I will.

David F.

Cypriss32
10-19-2008, 10:02 PM
Pm and email sent, just waiting on you to give me you info to send you the MO tommarrow. :)

SFFRONTMAN
10-19-2008, 11:02 PM
WOW that was a great price.

Sleepnosis
10-20-2008, 10:00 AM
I'm all about making deals on lightly used gear :D

All Items SPF.