PDA

View Full Version : WTS : Two custom built 5.56 uppers and LPKs (San Diego No Ship)


DBG
08-30-2016, 2:11 PM
*** SOLD ***

I built two ARs using 80% lowers a little while ago and have never really used them so looking to sell them both. One has never been fired and the other only a couple boxes of ammo. Will need to part out the lowers since I can't sell the finished 80%. Each rifle was over $850 in parts, asking $650 each and would do both for $1,000. Thanks for looking!

Here is a list of components used:
Barrel: Sionics Weapons Systems 16" Chrome Lined - Medium Contour - Mid-Length 1/8 Twist
Upper: Anderson Manufacturing Stripped A3 Upper Receiver
Lower: Modulus Arms 80% Lower*
BCG: AIM AR/M16 .223/5.56 Nitride 9310 MPI BDG Bolt Carrier Group (XAIMBCGN3BDG)
LPK: PSA
Stock: Blackhawk with Tapco Intrafuse T6 Rubber Butt Pad
Grip: Blackhawk Ergo
Handguard: Magpul MOE
Gas Block: Yankee Hill Machine YHM-9835A Front Flip Sight Tower w/ Bottom Rail
Muzzle Device: A2 Flash Hider
Magazine: HEXMAG 10/30 10-ROUND
Sights: MBUS Pro Rear
Optics: UTG 4.2" ITA Red/Green CQB Dot with QD Mount (SCP-DS3840W)
Sling: Blackhawk 2 Point , Midwest Industries QD Swivels, IWC Micro Flush QD Sling Mount
Tactical: TrustFire G01 CREE LED Tactical Gun Flashlight
533948

DBG
08-31-2016, 6:00 PM
bump

DBG
09-01-2016, 7:01 PM
bump

DBG
09-02-2016, 6:49 PM
bump

hellobuyers
09-02-2016, 11:58 PM
Pm sent

Sent from my SM-T550 using Tapatalk

DBG
09-04-2016, 10:33 AM
bump

Mr.Caketown
09-04-2016, 1:03 PM
Do you have the 80% Jig remaining?

DBG
09-04-2016, 1:19 PM
Do you have the 80% Jig remaining?

Sorry, no I sold it shortly after finishing the lowers. I used the Modulus Arms red jig and it worked great using a small drill press and trim router. I used it to finish 1 poly and 3 aluminum lowers and it was still in great shape.

hellobuyers
09-04-2016, 10:59 PM
Taking them

Sent from my SM-T550 using Tapatalk

d.eskayes@yahoo.com
09-13-2016, 11:24 AM
PMD.