PDA

View Full Version : Help!


HotRails
07-18-2008, 11:27 AM
Lancaster AK OLL buttstock not coming out! removed both screws and pulled like H&*%! ANything Im missing? ANy suggestions?

HotRails
07-18-2008, 4:50 PM
anyone ?

jandmtv
07-18-2008, 4:53 PM
is the stock wood or synthetic?

HotRails
07-21-2008, 10:53 AM
is the stock wood or synthetic?

It is wood.

bohoki
07-21-2008, 11:12 AM
It is wood.

make sure there is no screw under the recoil spring

they are fitted really tight infact i think they install them like a hammer on the handle

hold the butt alternate tapping the rear of the trigger guard and rear sight gas piston tube thingie with a rubber mallet

Harbinger
07-21-2008, 11:17 AM
You can insert a large flat-head screwdriver into the hole in the rear trunnion, then use the screwdriver as a lever, pushing toward the barrel. That should force it out.

Mike

scotthmt
07-21-2008, 11:19 AM
wiggle, pull, and swear

technique
07-21-2008, 1:45 PM
use a wooden dowel and hammer, works every time.

cal_ar_shooter
07-21-2008, 8:45 PM
You can insert a large flat-head screwdriver into the hole in the rear trunnion, then use the screwdriver as a lever, pushing toward the barrel. That should force it out.

Mike


+1

They are hell to remove.

Just take your time and keep trying. If you have a vice, place the stock in it to give you leverage. Place something to protect it, the stock that is.