PDA

View Full Version : WTS: Rifle rest, 1911 parts, AK parts, reloading stuff, etc.


xrMike
07-17-2008, 7:13 PM
ITEM #1 ==> Outer's Varminter rifle rest ==> $ 35 obo

Not really solid enough for precision work, but this rest includes rubber feet, 3 lock down knobs, and knurled elevation adjuster, swivels 360 degrees. I took it to the range 2x only. I'd rather not ship this thing; prefer to sell FTF (can meet anywhere between San Jose/Cupertino area and Hollister, or even in Salinas/Laguna Seca range area, at my convenience)

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/rifle_rest.png


ITEM #2 ==> Springfield Armory Milspec 1911 stock parts, parkerized model ==> $ 70 obo + shipping

ALL PARTS SOLD TO rg_1111@yahoo.com

I fired ~400 rounds through my Milspec before changing out these parts. Includes original barrel w/MIRROR finish inside (don't have the link thingy but the pin is there), barrel bushing, grip safety, trigger, hammer, sear, and stock grips with screws.

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/1911_parts.png


SOLD TO CalGuns ==> ITEM #3 ==> Lee Safety powder scale ==> $ 12 obo + shipping

Hardly used before I replaced it with the RCBS digital bad-boy. I'll be honest, this scale worked just fine for verifying my powder measure's charges for pistol reloading, but I wanted something better for precision rifle loading. Kind of tricky to use correctly, but if you're careful you can get consistent results with it. Includes original box and instructions. See here for Midway description (sells for $21 new):

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=712103

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/lee_powder_scale.png


SOLD TO FEDUPWBS ==> ITEM #4 ==> Romy AK Stock set #1 ==> $ 15 obo + shipping ($10 in person, minimal driving)

This kit is in good, but slightly worse shape than the next one, with finish flaking in some places on the handguards only, upper handguard is the roughest. Includes 2 of the foreign-made pistol grips shown in the photo following Item #5 (your choice of grips; first come first served).

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/AK_stock_set_1.png


SOLD TO FEDUPWBS ==> ITEM #5 ==> Romy AK Stock set #2 ==> $ 20 obo + shipping ($15 in person, minimal driving)

Same as previous, but in better shape, with nearly perfect finish. This one does not need to be refinished, imo. Includes 2 of the foreign-made grips shown in the grip photo (your choice; first come first served).

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/AK_stock_set_2.png

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/AK_grips.png


I also have (not shown) a black Tapco U.S.-made pistol grip that I will throw in with ONE of the above stock sets for an additional $5; first one to order a stock set that wants it, gets it.

xrMike
07-17-2008, 7:14 PM
SOLD to FEDUPWBS == > ITEM #6 ==> AK-74 fixed stock rear trunnion ==> $ 20 obo + shipping

This fits AK-74 fixed stock receivers (NOT AK-47). Came off an AK-74 wood stock set I bought from SKSman.com. Still inside the receiver stub, but most of the demilling has already been done, you just need to pry off the stub.

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/AK74_rear_trunnion.png


ITEM #7 ==> RCBS Precision Mic in .223 ==> $ 30 obo + shipping

Used a couple times only. Includes original box and instructions. See here for Midway description (sells for $43 new, on sale now for $38):

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=477756&t=11082005

http://img.photobucket.com/albums/v84/xrMike/guns/for%20sale/rcbs_223_prec_mic.png

FEDUPWBS
07-17-2008, 7:28 PM
ITEM #6 ==> AK-74 fixed stock rear trunnion ==> $ 20 obo + shipping
MINE!

FEDUPWBS
07-17-2008, 7:29 PM
And Ill take both romy wood sets

thedrickel
07-18-2008, 12:13 AM
To give them to me . . .

domokun
07-18-2008, 12:19 AM
WTF do you need more Romy stock sets for FED?



Free bump...

I guess Romy stock sets to FED is like ammo to the rest of us... You can never have too much of them! :D

xrMike
07-18-2008, 7:40 AM
Meh, I think he just uses them for firewood.

But what a pretty flame they make, those Romanian laminated woods... :D

Items 3, 4, 5, and 6 are sold or pending.

If the Milspec parts are too high (I have no idea what they're worth), make an offer.

xrMike
07-19-2008, 10:51 AM
Milspec parts sold to rg_1111_at_yahoo.com ==> trigger, hammer, grip safety, disconnector, grips

New price for remaining Milspec parts (barrel + barrel bushing): $40 + $5 shipping (or $35 FTF)

Other items still remaining:


rifle rest
rcbs precision mic