PDA

View Full Version : FS or Trade: .40SW brass lower prices and updated ad


hawk1
07-10-2008, 6:22 PM
...

hawk1
07-10-2008, 6:22 PM
Below are sold items
Dillon RL550B less than 100 rounds through this press, zero through dies.
Comes with Dillon .45 carbide dies and conversion kit, strong mount, bullet tray, empty and loaded cartridge trays, repair parts kit new, small primer bar, both large and small powder bars, low primer alarm, extra powder die new, primer tubes and tips(large and small), tools, Brass Dillon flip tray.

$490 SOLD
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1126.jpg
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1127.jpg
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1128.jpg

2000+ pcs .45 brass various headstamps cleaned and polished (some nickel included but mostly brass)
SOLD $50 per thousand I can get about 2100 or so in a USPS postal Flat Rate box I think flat rate is $12 to ship. Add the $12 to ship if it is more I will eat the extra cost.


Winchester 231 powder 4lb container full unused
Winchester large pistol primers 5000 count
2000 (500x4) Oregon Trails Lasercast (http://www.laser-cast.com/)
200grain semi-wadcutter lead bullets .452 diameter. Hardcast excellent for IDPA shooting and works great with the Win231 powder
All for $275 SOLD

Used Miday 1292 Tumbler, bucket, sieve, new walnut media, Free Dillon Lube (full). Bucket, sieve, walnut media, Dillon lube not shown but is included.
$60 SOLD

http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1134.jpg

Pact digital scale with calibrating weights and powder tray/funnel, directions. all used
$102 SOLD
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1133.jpg

New Frankford Arsenal Vibra-Prime, extra tubes, extra small and large primer adapters, extra trays. (Extra parts were purchased because manufacturer stopped making this auto-primer. Works excellent, I wanted to make sure I had extra parts to keep it running for awhile) all in plastic case.
$125 SOLD
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1129.jpg
EGW undersize dies in 9mm, .40SW, and .45acp. Carbide sizing dies that are 0.001" smaller in diameter than typical dies. These dies also flair lower than some other sizing dies and size the case further down, which may prevent feed failures from cases bulged near the base as is typical of brass fired in Glock and other loose chambered guns. Excellent for tight chamber barrels.
All three for $45 *SOLD*
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1130.jpg

Lee Factory Crimp Die in .45acp- new in box. This die features a carbide ring that sizes the cartridge while it is being crimped. Add any amount of crimp you need.
$15/ SOLD
http://i220.photobucket.com/albums/dd283/hawk1C6/Dillon/DSCN1130a.jpg

knucklehead 61
07-11-2008, 7:06 AM
PM INBOUND

oddjob
07-11-2008, 7:28 AM
PM sent

Boxer
07-11-2008, 7:43 AM
PM sent.

Corbin Dallas
07-11-2008, 7:45 AM
Hawk - PM inbound

hill billy
07-11-2008, 9:34 AM
I'll take the Lee FCD for $15 please.

PolishMike
07-11-2008, 10:26 AM
PM sent

hawk1
07-12-2008, 10:40 AM
Bump, looking for trades as well. Just ask.

wrench
07-12-2008, 1:47 PM
PM sent on VibraPrime

hawk1
07-13-2008, 9:15 AM
I'm going to give the whole package a couple more days to go as one unit. A couple people interested so I want to give them a chance to say yes or no. Then I'll split it up and will contact each person that replied for specific items.

As before, I am willing to trade towards firearms for part or all of this setup.

Thanks

jjefrey
07-13-2008, 10:12 AM
I'm going to give the whole package a couple more days to go as one unit. A couple people interested so I want to give them a chance to say yes or no. Then I'll split it up and will contact each person that replied for specific items.

As before, I am willing to trade towards firearms for part or all of this setup.

Thanks

Whats the price for the whole package?

s10rick
07-13-2008, 8:55 PM
Dillon RL550B less than 100 rounds through this press, zero through dies.
Comes with Dillon .45 carbide dies and conversion kit, strong mount, bullet tray, empty and loaded cartridge trays, repair parts kit new, small primer bar, both large and small powder bars, low primer alarm, extra powder die new, primer tubes and tips(large and small), tools, Brass Dillon flip tray.[/b]


PM Inbound

JOHNNYRAMBO
07-14-2008, 8:17 AM
Used Miday 1292 Tumbler, bucket, sieve, new walnut media, Free Dillon Lube (full). Bucket, sieve, walnut media, Dillon lube not shown but is included.
$60

Ill take it!!!!!!!!

DrunkSkunk
07-14-2008, 12:51 PM
good deal, i'd like to start reloading

AR152be
07-14-2008, 12:55 PM
I am interested in the tummbler , on top of some other Items you have I might want...

hawk1
07-14-2008, 2:58 PM
I'm going to break up the pacakge now since I haven't been able to sell as one package.

I am contacting those that asked about specific items to see if they are still interested. I will update here and in my original post as to what is still available.
Thanks to all that have contacted me about the package.

hill billy
07-14-2008, 2:59 PM
I'm going to break up the pacakge now since I haven't been able to sell as one package.

I am contacting those that asked about specific items to see if they are still interested. I will update here and in my original post as to what is still available.
Thanks to all that have contacted me about the package.
I will still take the Lee fcd for .45. Pm payment or pick up directions, thanks.

AR152be
07-14-2008, 3:06 PM
And I want the tumbbler, plus other stuff

hawk1
07-15-2008, 11:38 AM
Bump, all I have left is the brass listed in my original post. Willing to trade as well. Just ask

hill billy
07-15-2008, 11:39 AM
Bump, all I have left is the brass listed in my original post. Willing to trade as well. Just askAren't you glad you split it up, now?:D

hawk1
07-15-2008, 11:46 AM
Yeah, everything went to great guys and it was a pleasure dealing with all of you.
For the guy that wanted to start reloading, it was an excellent package to hit the ground running with. For those that were not too far of a drive I even offered to drive the package out, set it up, and walk through the reloading process with them. Just couldn't close a deal though.
All's good...:)


Come get sum brass....:D

hill billy
07-15-2008, 11:48 AM
Come get sum brass....:DI will take 3k of the 45 brass if you don't mind holding it until next week for me. OH and try and fit it in larger box for maybe Fedex?

hawk1
07-15-2008, 11:51 AM
I will take 2k of the 45 brass if you don't mind holding it until next week for me.

Absolutely I will! Shoot me an email I'll have it ready for you.
Thanks Chris