PDA

View Full Version : The Bullet Button Speed Funnel!


tenpercentfirearms
06-16-2008, 3:05 PM
For those of you who want a simple add on device for your Bullet Button, we are happy to introduce the Bullet Button Speed Funnel.

The Bullet Button Speed Funnel is made of tough resin and simply fits on over your existing Bullet Button. They were designed to snap on so they won't come off without a good deal of pull.

The wider funnel like opening will allow your tool to glide to the middle of the hole and activate your Bullet Button like normal, but your aim doesn't have to be as precise.

Order yours today.

http://www.tenpercentfirearms.com/index.php?main_page=product_info&cPath=8&products_id=381

http://i53.photobucket.com/albums/g52/elrojo14/TPF/speedfunnel2.jpg

savageevo
06-17-2008, 8:29 PM
can you show a video on how that works. thanks

heycorey
06-17-2008, 8:57 PM
I have to ask what I'm sure is a dumb question. By releasing a fixed magazine (even with a tool), doesn't the rifle then become illegal, since it now has an open magwell; i.e., it no longer has a fixed magazine installed?

Josh3239
06-17-2008, 9:26 PM
Heycorey, you are pretty behind the times. It isn't your fault, the Calguns FAQ/Newbie Guide or w/e we call it is in desperate need of updating.

Use the search button and look up "bullet button". Better yet look here: http://www.tenpercentfirearms.com/index.php?main_page=product_info&cPath=8&products_id=265

heycorey
06-17-2008, 9:33 PM
Heycorey, you are pretty behind the times. It isn't your fault, the Calguns FAQ/Newbie Guide or w/e we call it is in desperate need of updating.

Use the search button and look up "bullet button". Better yet look here: http://www.tenpercentfirearms.com/index.php?main_page=product_info&cPath=8&products_id=265


I know, I know. And I'm not very bright either, apparently. But thanks for the link ... I'll get to reading! :)

tenpercentfirearms
06-17-2008, 11:09 PM
This helps too.

http://www.tenpercentfirearms.com/index.php?main_page=ar15

cineski
06-20-2008, 8:27 AM
Of course keep in mind these quotes from the website:

creates a condition allowable under some CURRENT INDIVIDUALS INTERPRETATION of California law

The BULLET-BUTTON has not yet been approved by the CALDOJ.

tenpercentfirearms
06-22-2008, 8:03 AM
Of course keep in mind these quotes from the website:

creates a condition allowable under some CURRENT INDIVIDUALS INTERPRETATION of California law

The BULLET-BUTTON has not yet been approved by the CALDOJ.

So? Do you need DOJ approval to sell semi-automatic shotguns in the State of California? Afterall, if they have a pistol grip and a collapsible stock, they are assault weapons.

That is what I ask manufacturers. You do not need permission to do what is legal. You just do it. Do you need permission to sell M1 Carbines in California? Did you get them approved by the DOJ first? The answer is always no.

You do not need the DOJ's permission to build up a fixed magazine rifle. It might make you feel better, but you don't need it. The sad thing you is you won't get it either. The DOJ no longer gives out their opinion on anything. They send you to your local DA. Most likely your local DA doesn't care.

There is some risk involved in owning these things. You might hit the lottery and find the extremely rare law enforcement officer that doesn't know about any of this and won't listen to your explination of the penal code and he won't look at your supporting documents you carry with you. He might take your rifle.

He might also do that to your Kel-Tec SU16 too.