WTB 510 DTC reloading equipment

[spamby59]

Need all necessary equipment for 510 reloading r

[jandmtv]

And?

[C.G.]

It would probably get more traffic in the WTB section of the forum.

[mrkubota]

Need all necessary equipment for 510 reloading r




PM Sent

[CSACANNONEER]

How much do you want to spend? Do you want the top of the line everything for top quality match rounds or, do you want the cheapest set up that will get you by? I assume it's somewhere in the middle. In any case, I'll suggest becoming a member of the FCSA. You'll get more info on 50s from our members only forum and our magazines than you thought possible. If you're close to me, I'll show you my 50 reloading set-ups. I've got both Hornady and Lee presses, 4 different 50 trimmers (including a Giraud), a M2 primer seater (expensive but, a work of art!), K&M neckturner, primer pocket tool, trimmer, expandiron (on order) and a flash hole uniformer. PM me to set up a time to see how they work.

[draconianruler]

How much do you want to spend? Do you want the top of the line everything for top quality match rounds or, do you want the cheapest set up that will get you by? I assume it's somewhere in the middle. In any case, I'll suggest becoming a member of the FCSA. You'll get more info on 50s from our members only forum and our magazines than you thought possible. If you're close to me, I'll show you my 50 reloading set-ups. I've got both Hornady and Lee presses, 4 different 50 trimmers (including a Giraud), a M2 primer seater (expensive but, a work of art!), K&M neckturner, primer pocket tool, trimmer, expandiron (on order) and a flash hole uniformer. PM me to set up a time to see how they work.

What is a expandiron?

[CSACANNONEER]

What is a expandiron?

Good question. I'll let you know more after I get it and play with it a bit. All I know right now is that it is used instead of the expander ball in a FL sizing die. I just got a custom made decapping pin for my Hornady FL die that doesn't have any expander ball (or whatever you call it). The expandiron is used after sizing to uniformly open up the neck enough to be able to get a bullet to seat.

[Hunter]

Need all necessary equipment for 510 reloading r


This might help. http://www.biggerhammer.net/barrett/wwwboard/index.cgi?read=211324

I am selling all my Reloading Equipment for the .510 DTC. I have a like new Hollywood Senior turrent Press with all DIES and such needed to reload for the .510 DTC. Micro Bullet Seater, Primer tool, powder measure (everything in the pic and more) I also have about 200 pieces of fireformed brass that has been fired twice. Hodgen 50bmg powder. Ball Projectiles and plenty of 50 cal ammo cans. You will recieve everything complete ready to reload the 510 dtc. Along wit hallot of misc tools and parts.
I am looking to get $2500 for everything, Once you see all the extra stuff you will know its a awsome deal

Call me at 714-716-6604 thanks, Patrick
http://img.villagephotos.com/p/2003-10/423014/TPTSC-hollywoodpress.JPG